Race Electronics Ignitions & Electrical

Lowdoller Motorsports Push-Lock Boost Control Fitting Kits

Lowdoller Motorsports push-lock boost control fitting kits provide a secure, quick, and simple way to plumb various boost and vacuum components in turbocharged and supercharged vehicles, such as wastegates, boost controllers, and blow-off valves. The "push-lock" design allows for tool-free installation by simply pushing the tubing into the fitting, which then grips the line. These types of fittings offer a significant advantage over traditional methods like rubber hoses and clamps, making the entire setup easier to connect and disconnect for maintenance or adjustments. Order the fitting kit designed for your application to plumb your vacuum/boost lines like a pro!

Not Yet Reviewed

$149.99

AiM Sports Pressure Sensors

AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.

5.0 out of 5 stars ( 1 )

$165.00

FuelTech Exposed Tip Thermocouples

FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners

Not Yet Reviewed

$99.00

Holley EFI Single-Channel EGT Kits

Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding

Not Yet Reviewed

$319.95

Manufacturer Rebate

Dedenbear Throttle Stop Solenoids

Keep your throttle stop in tip-top working order with Dedenbear throttle stop solenoids. They are available for all of Dedenbear's different types and styles of throttle stops. The solenoids feature heavy-duty construction to handle the heat of racing engines.

Not Yet Reviewed

$129.99

—

$135.99

Summit Racing™ Data Acquisition Components

Summit Racing™ offers numerous data acquisition components help you identify, measure, and log a variety of sensor outputs for your engine, driveline, and suspension. Whether for replacement or upgrade, these parts are made from top-quality materials and factory-type specifications to ensure a proper fit and optimum performance. Technology advancements in the auto industry supply an increasing amount of information to drivers in order to direct maintenance decisions and facilitate a smooth, efficient ride. Order the part needed to collect the data for your vehicle.

Not Yet Reviewed

$102.99

Racepak Un-Programmed V-Net Modules With Sensors

Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.

Not Yet Reviewed

$337.95

FuelTech EGT Conditioners

FuelTech EGT conditioners can be used to read EGTs, CHTs, oil, air, water, or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up input channels to be used for other purposes. For more precise and accurate exhaust gas temperature monitoring, order FuelTech EGT conditioners. Key features: * Thermocouple conditioner K-Type * Single-channel * 0-5 V analog output * 12 V * For use with FuelTech's WB-O2 Datalogger or PRO24 Datalogger (sold separately) * EGT thermocouple not included

Not Yet Reviewed

$109.00

AiM Sports Data Hubs

AiM Sports Data Hubs solve the problem of lots of data, many peripherals, and a whole bunch of cables. Offering a cleaner, efficient acquisition of data, these CAN connection multipliers work as an interface between your AiM logger and its peripherals. And, they transmit all of the information you need to your logger with only one cable! Data Hubs can be connected in sequence in order to increase the number of peripherals which can be connected, and they're available in two versions—2-way or 4-way hubs. AiM Data Hubs will hook you up to a really "neat" way to collect data!

5.0 out of 5 stars ( 1 )

$85.00

—

$1,499.00

Holley Single-Channel EGT Controllers

Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple

Not Yet Reviewed

$186.95

FuelTech Travel Sensors

FuelTech Travel sensors are designed to accurately measure suspension or body movement of your vehicle up to eight inches. They feature 5mm Heim joints for mounting, and are compatible with most ECUs, including FuelTech's Engine Control Units (sold separately). Order the FuelTech Travel sensor model in the application you need for your specific setup. Connector Pinout: --Pin 1 - Ground (Brown) --Pin 2 - Signal (Yellow) --Pin 3 - 5 V (Blue) Note: Requires a FuelTech Travel sensor connector kit (sold separately).

Not Yet Reviewed

$349.00

Computech Replacement Stainless Steel Thermocouple Wires

Exhaust gas temperature sensors require a special metal alloy to be used for monitoring the correct temperature. These Computech replacement stainless steel thermocouple wires are made specifically for K-Type probes and are wrapped in a strong stainless steel braided shield.

Not Yet Reviewed

$3.95

12 Results Found For "Order"