Availability
Showing In Stock Items. Show All 9 Items.
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$79.05
—
$82.79
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
$879.95
—
$1,599.95
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$399.00
—
$1,348.00
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE LS drive-by-cable ECU harness for the 24x Gen 3 platforms has 36 terminated connections along with labeled open leads to get linked for the ultimate control and performance.
Not Yet Reviewed
$949.99
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
