Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
10 Results Found For "switch"
Showing In Stock Items. Show All 13 Items.
Racepak Smartwire Switch Modules
Racepak switch modules provide the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the module, and switch data is routed to the SmartWire via a single cable. These modules allow your input for 16 remote switches. Adding a second switch module is quick and easy, through the use of a short jumper cable between the two modules. Racepak SmartWire switch modules are machined from billet aluminum and anodized black.
Not Yet Reviewed
$388.95
AEM Electronics 22-Channel CAN Sensor Modules
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$423.95
Dedenbear Crossover Delay Boxes
Choose which tree--yours or your opponent's--to launch off of with one of Dedenbear's Crossover delay boxes. Use the regular delay feature to launch against your own tree, or flip on the crossover when you want to leave off of your opponent's tree. You can even use one box to leave off of your tree's top bulb, and one to leave off of the bottom one. The boxes feature push-button thumbwheels (0.000-9.999) and a toggle switch to bypass the box completely. The cross over delay boxes can be used with any transbrake up to 45 amps, and on any ignition system. Want the Dedenbear advantage for a win? Just dial it in!
( 3 )
$444.99
Holley EFI Digital Dash I/O Adapter with Wiring Harness Kits
Holley EFI Digital Dash I/O adapter with wiring harness kits offer more performance from your digital dash. Available terminated or unterminated, these vehicle harnesses provide 10 additional inputs/outputs to your 7 in. unit. They can be configured for gauges or switches and data-logged locally through your digital dash. The adapters bring out connections to a waterproof 26-pin connector, similar to ones used on EFI units, and the kits include a USB memory stick to update digital dash firmware that supports the adapter.
( 3 )
$357.95
—
$409.95
Computech EGT Plus Monitor Kits
Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm
( 2 )
$479.95
Altronics O2 Alert Warning and Recording Systems
Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.
( 1 )
$469.99
Computech EGT Plus Monitors
Computech EGT Plus monitors are one of the most accurate dual channel exhaust gas temperature systems available today. They are designed to monitor not only exhaust gas, liquid, tire, and track temperatures, but also engine rpm. The monitors feature record options that show max and beginning and end of run readings, and they can be activated via remote switch, trans-brake event, or in continuous mode.
Not Yet Reviewed
$379.95
Biondo Little Delay Boxes
Biondo Little Delay Boxes are designed for racers who need a compact and affordable crossover delay box. The "Little Wizard" is so simple to operate that you won't need the instructions. They are compatible with all ignitions and cylinder engines. Features include: * Ultra bright lighted display * Tap up/tap down * Glove friendly * Back lit control buttons * Built in driver reaction tester * Large LCD display * Programmable "Push Button Interrupt Time" safety feature *
( 2 )
$329.99
Dedenbear Reaction Time Delay Boxes
These Dedenbear reaction time delay boxes feature push-button thumbwheels with a range of 0.000-9.999 seconds, and full voltage through the boxes, with no voltage drops to the transbrake. They can also handle any transbrake up to 45 amps. They can be used with solid core wires and on any ignition system.
( 2 )
$349.99
Biondo Elite 95 V2 Delay Boxes
Biondo Elite 95 V2 delay boxes provide the option to control a dial board. The Elite 95 V2 boxes are packed with powerful features like a built-in Mega Dial controller to directly control any of Biondo's V2 dial display boards. They include a five push-button mode, including Set and Go. In button modes 1, 3, and 4 you have the ability to tap up and down on the same pass. Additional features include a built-in LED for the Driver's Reaction Tester, and while practicing with the Drivers Reaction Tester, the Elite 95s will keep track of and display your average reaction time. The throttle stop output can be used to control a down track throttle stop, a staring line enhancer throttle stop, nitrous solenoids, or a shift solenoid for up to two shifts on time. Additional features and notes: * Crossover delay box * CrossTalk compatible * Controls any V2 Mega Dial display board * Smart select * 1 or 2 hits at the tree with built-in "how late" feature * Tap up and down to a .001 of a second * Push-button interrupt safety feature * Starting line enhancer (SLE) * 4-stage timer (programmable to thousandths) * Backlit display and keypad * Glove friendly * Compatible with all ignitions
Not Yet Reviewed
$438.99
