Availability
Showing In Stock Items. Show All 21 Items.
Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output
Not Yet Reviewed
$499.95
These Innovate LM-2 digital air/fuel ratio meter basic kits combine an air/fuel ratio meter and a full-function 32-channel data logger to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, a race carburetor, an aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The Innovate LM-2 digital air/fuel ratio meter basic kits' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. Their self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. They also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2-compatible with all fuel types * OBD-II scan tool reads/clears DTCs and logs up to 16 channels of CAN OBD-II data (cable not included) * Large, high-contrast graphics LCD * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial in and out * USB connection to your PC
( 6 )
$469.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$349.95
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
HalTech's new multi-function CAN gauge displays real-time data from your HalTech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series
Not Yet Reviewed
$430.00
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
If your target is peak power, then AiM LCU-One Lambda controllers should be part of your engine-tuning plans. The precise mixture of air and fuel needs to be known for optimum performance. AiM Lambda controllers utilize proven wideband Bosch LSU 4.9 probes and can detect precise values from 0.65 to 1.6 to perfect your engine tuning. By offering configurability of Stoichiometric ratios, the LCU-Ones can be used on most gas, diesel, or alternative fuel engines. The controllers are available in three versions: CAN, analog, and CAN+analog. All of the data you need to hit peak efficiency--and keep it that way--is at your fingertips inside the AiM LCU-One Lambda controllers.
Not Yet Reviewed
$450.00
Wagner Tuning offers MFD32 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, and Toyota. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28 display. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. MFD32 displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with our DSS - Display Setup Software * Pre-configured views for a quick start with our display * Easy Plug-and-Play installation with our cable set – simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Left-hand and right-hand drive displays are available --- Access to all engine control unit (ECU) data: Wagner Tuning provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm
( 2 )
$479.95
—
$519.95
Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.
( 1 )
$469.99
Computech 15 psi pressure monitor kits are extremely accurate low-range pressure sensors, perfect for monitoring carbureted fuel pressure and boost psi. The pressure sensor will monitor from 0 to 15 psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech 100 psi pressure monitor kits are extremely accurate and will be sure to capture every little pressure change. Measuring accurately throughout the entire zero to 100 psi range, they work great for oil, boost, or fuel psi. The kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
Computech 500 psi pressure monitor kits have a great wide-range pressure sensor that is still extremely accurate in low and high-pressure environments. They are typically used for oil pressure, injected fuel psi, and transmission pressure. The pressure sensor will monitor from 0 to 500 psi. Computech 500 psi pressure monitor kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.
Not Yet Reviewed
$299.95
On Sale
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
Wagner Tuning offers MFD15 data acquisition displays for a wide range of vehicles, including models from Audi and Ford. Now you can always have all relevant values in view. The MFD15 Gen2 is equipped with an OLED screen, which offers best readability even in direct sunlight. Due to the outer diameter of 52mm, the display is compatible with commercially available bezels for the interior, even without a vehicle-specific holder from Wagner. The operation is done with the two, on the windshield mounted, push-buttons or variable the optional rotary knob. --- Key features: * Compact design: 52mm in diameter and only 12.5mm deep * Switching flash: The LED on the front of the display can be used as a switching flash and/or as a warning LED and can be configured freely * Can Bus: Support of Can Bus ECUs, OBD2 from 2008 and deep values for VW/Audi from 2008 or build your own Can Stream * WLAN: connect to your smartphone or PC and perform all further steps via our Web UI * Additional inputs: connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display * Preset alarms: predefined alarms can be easily activated and customized. For example, get a big alert when the exhaust gas temperature is above 900 degrees F. * Customization: Use your own startup logo or background image to make it your MFD15 Gen2 * Online logging: Log your data with your smartphone or PC and save the log to your device for later analysis * Flex fuel: View ethanol content and temperature on your display * Can switching: Switch can switches using the buttons on your display and forward the readings from your analog inputs to the can bus --- Different views: Choose up to eight pages of different views and customize your display to best suit you and your vehicle: * Analog pointer * Double value * Gear indicator * 4-fold values * 6-fold values * Bar + double display * Round display * Bar graph (double across) * Performance meter * Bar chart (1-6-fold upright) * Single value
Not Yet Reviewed
$329.00
Wagner Tuning offers MFD28 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, BMW, Dodge, and Ram. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. These displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with Wagner Tuning's DSS (Display Setup Software) * Pre-configured views for a quick start with our display * Easy plug-and-play installation with Wagner's cable set; simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F. * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Versions for left- or right-hand drive are available --- Access to all engine control unit (ECU) data: Wagner provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.
( 2 )
$259.99
—
$262.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
