Availability
Showing In Stock Items. Show All 21 Items.
Biondo throttle stop Bullet cable savers are designed to mount in between your throttle cable and the throttle control, to strengthen the union between the two. They thread onto your 10-32 in. male throttle cable and then back into the throttle stop. By eliminating any flex at that mounting position, you will improve over throttle cable consistency, providing you with more consistent on-track performances.
Not Yet Reviewed
$23.99
Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.
Not Yet Reviewed
$41.00
Moroso throttle stops for Holley 4150-style, 4-barrel racing carburetors provide a very strong and positive stop. They also prevent excessive side loading on the throttle shaft, which causes the throttle bores to wear out. These stops are adjustable and mount to the carburetor hold-down stud.
( 8 )
$49.99
Lowdoller Motorsports shock travel sensor mounting hardware is designed to secure shock travel sensors to a vehicle's control arms and chassis without requiring welding, providing a way to collect real-time data on suspension movement for performance tuning. The collected data helps users understand how the suspension is reacting, allowing them to identify and correct issues, leading to improved performance, better handling, and increased tire performance. This shock travel sensor mounting hardware is available for compatibility for various suspension setups, from stock to advanced drag racing applications. Shock travel sensors sold separately.
Not Yet Reviewed
$40.00
Connect your sensors, cameras, and data loggers with AiM Sports patch cables. These replacement cables will help extend their reach and make your wiring setup easier. AiM offers several styles to fit their loggers, including thermocouple extensions and dual thermocouple Y-cables. Dozens of cable types are available for automotive, drag race, Jr. drag race, street performance, and kart applications. Keep the data flowing efficiently and accurately through AiM Sports patch cables.
( 2 )
$32.00
—
$50.00
Manufacturer Rebate
Innovate LM-2 inductive clamps are used to hold onto one wire and allow your LM-2 monitor to track RPM. Made with extra-length wire and strong molded plastic, these data acquisition accessories will provide a long service life. The clamps can be valuable in a variety of applications, including automotive, drag and Jr. Drag race, karting, marine, and powersports.
( 6 )
$36.99
Racepak pressure transducer hose extensions help to minimize harmful vibrations to a pressure or vacuum sensor. These braided steel hose extensions are engineered for the harsh conditions of the racing environment. They measure 4 in. long and include 1/8 in. NPT male and female ends. Race smart--choose Racepak products!
Not Yet Reviewed
$42.95
RaceSense Tire Gauge protective rubber cases help keep your gauge looking and operating like new. They also provide a better grip when you get stuck racing in adverse weather conditions. Keep your FastMate Racing pyrometer in optimal condition with an assist from RaceSense Tire Gauge protective rubber cases.
Not Yet Reviewed
$35.00
On Sale
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$89.95
$49.47
Racepak driveshaft sensor mount brackets allow you to easily fasten any 5/16 in. driveshaft sensor to a 9 in. center section. These L-shaped supports feature slotted mounting for easy adjustments and snag-free, rounded-off ends. No fabrication is necessary when you use Racepak driveshaft sensor mount brackets.
Not Yet Reviewed
$39.95
DIYAutoTune TunerStudio tuner cables bring a whole new level of tuning refinement to your car, truck, or motorcycle. This Serial to USB port adapter works properly with all TunerStudio versions. It is highly recommend that the adapter be used if you're tuning a PC/laptop that doesn't have a DB9 Serial connector. Or, you can use another adapter with a genuine FTDI chipset (which this uses). Note: This adapter includes a 2 ft. extension cable, but is only recommended for use if you have vibration issues with the adapter plugged directly into your laptop. USB cable runs are more susceptible to noise than RS232. Therefore, in such instances, it's highly recommended to use the DIYAutoTune 6 ft. tuning cable in combination with this adapter for best results.
( 4 )
$28.99
On Sale
Racepak ECU interface cables are adapter harnesses used to connect the CAN bus data stream from your existing ECU to a Racepak IQ3S (Street Dash), IQ3D (Drag Dash), or Racepak Universal CAN module. Once this CAN cable is connected and properly set up, data from the ECU is then available for use with the Racepak IQ3S, IQ3D or Racepak Universal CAN module.
Not Yet Reviewed
$79.95
$43.97
On Sale
Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.
Not Yet Reviewed
$43.55
Clearance
Racepak Smartwire connectors are replacements to repair or replace a 23-pin connector on the harness going to the Racepak Smartwire. Plug and pins are included.
Not Yet Reviewed
$55.39
$39.50
Racepak interface 7-pin cables are available in multiple lengths to extend analog and interface module connections on Racepak V300SD, V500SD and G2X Pro data loggers. They are made of high-quality materials to provide long-lasting durability and performance. If you need to extend your analog or interface connections, Racepak interface extension cables can make it happen.
Not Yet Reviewed
$28.01
On Sale
MSD Power Grid exhaust module replacement pressure sensor harnesses keep your module operating at optimum levels. These wiring harnesses are available for both sensor 1 and 2. For the best performance from your Power Grid module, choose genuine MSD replacement pressure sensor wiring harnesses.
Not Yet Reviewed
$33.63
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
