Selected Filters


Availability


6 Results Found For "pressure"

Part Groups

Results 1 - 6 of 6

Holley EFI 8-Channel CAN EGT Kits

Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware

5.0 out of 5 stars ( 1 )

$1,749.95

Racepak LDX Logger Dash Data Recorders

Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.

Not Yet Reviewed

$1,599.95

Racepak G2X-Pro Data Loggers

Racepak G2X-Pro data loggers are ideal for any large number of sensor input applications, as they can monitor up to 71 channels. They provide lap and segment timing, along with speed and track mapping functions via GPS. Packages for monitoring everything from brake pressure to suspension height—and anything else that can be quantifiably charted—are also available. These loggers are compatible with all Racepak sensors, allowing for full customization. The optional G2X-Pro dash display shows valuable race and lap information, including G-forces and rpm. Gain the advantage of becoming a fully-informed racer with Racepak G2X-Pro data loggers. Items and features include: * G2X-Pro data logger * GPS antenna * Accepts up to 16GB SD Memory Card for countless hours of monitoring * Datalink II software communication cable * Power/ground/engine RPM harness

Not Yet Reviewed

$1,949.95

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,699.95

$1,849.95

On Sale

AEM Electronics CD-5 Carbon Digital Racing Dash Displays

AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch

Not Yet Reviewed

$1,649.95

Racepak IQ3SL Street Logger Dash Recorders

Racepak IQ3SL Street Logger dash recorders add data-logging to the popular IQ3S Street display dash. These add-on data acquisition accessories make an ideal solution for vehicles that need full road instrumentation, as well as the ability to record data—combining all functions into one easy-to-use unit! Standard data—such as speed, odometer, turn signals, hi/low beam and parking brake indicators—are displayed, along with programmable shift and warning lights. In addition, these dash recorders feature internal processing to read data from OBDII and most aftermarket ECU and EFI systems. This makes the IQ3SL Street Logger a great option for modern cars or vehicles with modern EFI engine swaps. Racepak IQ3SL Street Logger dash recorder features include: * Displays standard road functions * User-defined shift light output * Displays up to 28 inputs via four page * Shielded, low-luster display for better sunlight viewing * Blue dimmable backlight * Metric and English capable * Gear Indicator * CAN-based and OBDII compatible (adapter cables available) * Four user-defined alarms * Connects to any Racepak V-Net data logger * User-defined 5-character sensor input names * Optional GPS module for speed

Not Yet Reviewed

$1,749.95

  • 1
  • Page 1 of 1