Race Electronics Ignitions & Electrical - pressure KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

AiM Sports Pressure Sensors

AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.

5.0 out of 5 stars ( 1 )

$165.00

AutoMeter Ultimate DL Pressure Transducer Kits

AutoMeter Ultimate DL pressure transducer kits have everything you need to send back the right information to your DataPro software. They are available in 15 or 100 psi, so you can choose what's best for your setup. The kits include an 8 ft. preassembled cable and wiring for a smoother installation.

Not Yet Reviewed

$184.99

AEM Electronics 6-Channel CAN Sensor Modules

AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins

Not Yet Reviewed

$193.95

On Sale

Racepak Analog Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.

4.62 out of 5 stars ( 13 )

$368.95

$172.85

—

$234.95

On Sale

Racepak Plug-In Old-Style Transducer Modules

When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor

Not Yet Reviewed

$399.95

$225.45

On Sale

MSD Power Grid Exhaust Module Sensors

MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.

Not Yet Reviewed

$147.95

$113.20

Dakota Digital EFI Interface Modules

With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature

4.66 out of 5 stars ( 29 )

$133.00

Racepak Analog Pre-Programmed V-Net Modules Without Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.

Not Yet Reviewed

$193.95

—

$229.95

Lowdoller Motorsports Infrared Tire and Track Temperature Sensors

Lowdoller Motorsports infrared tire and track temperature sensors provide real-time, non-contact tire and track temperature data, enabling precise control over tire performance by allowing drivers to monitor and optimize the tire temperature within its optimal grip range. Key benefits include rapid and accurate measurements, the ability to detect uneven temperature gradients across a tire's tread for better suspension and pressure adjustment, and the capability to measure track surface conditions to tailor burnouts and understand overall track behavior. The sensors can also be used for brake temperature monitoring, adding versatility for racing applications. The sensors can be mounted in various locations to allow for flexible application on tires or near the track surface.

Not Yet Reviewed

$164.00

FuelTech Backpressure Dampening Canisters

FuelTech backpressure dampening canisters will make a great addition to your turbocharged engine. Measuring the exhaust backpressure is vital data required to best determine the true efficiency of your combination. By separating the backpressure sensor from the direct connection to the exhaust manifold using FuelTech's backpressure canister, the sensor will be protected from heat, moisture--and has pressure spike filtering naturally built into the canister. This filtering assists in protecting the sensor and allows you to see true indication of pressure in the exhaust manifold. These billet aluminum backpressure canisters measure 2 3/4 in. to 2 1/2 in. with mounting holes 2 in. center-to-center. The sensor port and hardline inlet are tapped to 1/8 in. NPT. Add one of these backpressure canisters to your project today!

Not Yet Reviewed

$199.00

Racepak Digital Pre-Programmed V-Net Modules Without Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.

Not Yet Reviewed

$204.95

On Sale

Racepak USM Connector Cables

Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.

Not Yet Reviewed

$134.95

Summit Racing™ Data Acquisition Components

Summit Racing™ offers numerous data acquisition components help you identify, measure, and log a variety of sensor outputs for your engine, driveline, and suspension. Whether for replacement or upgrade, these parts are made from top-quality materials and factory-type specifications to ensure a proper fit and optimum performance. Technology advancements in the auto industry supply an increasing amount of information to drivers in order to direct maintenance decisions and facilitate a smooth, efficient ride. Order the part needed to collect the data for your vehicle.

Not Yet Reviewed

$102.99

FuelTech Pan Vacuum Sensors

FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.

Not Yet Reviewed

$179.00

14 Results Found For "pressure"