Availability
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,699.95
Holley Sniper 2 EFI 5 in. digital dash displays come out of the box, ready to plug-and-play with your Sniper 2 EFI ECU. The 5 in. digital touch screen display is pre-loaded with three easy-to-read layouts that provide critical system information, thanks to the provided magnetic GPS antenna. Also included is the same handheld wizard as the 3.5 in., tuning, and data logging, along with two dash mounting stand offs and a suction cup, allowing you to quickly mount the dash to most flat surfaces in the vehicle, without drilling any holes. Additional notes and features: * Compatible only with Sniper EFI 2 Products * Next Generation mil-spec style M8 positive lock connector for easy and secure installation * Built-in Calibration Wizard allows you to quickly build a base engine calibration for your Sniper 2 EFI powered vehicle, without the need of a laptop * Three default background skins pre-loaded with the option to customize the existing layouts to read exactly what information you want to see * Quickly swipe between multiple monitor screens, with customizable parameters (tune, warm-up, race, drive, etc.) * Provides Real-time ECU tuning, allowing you to dial in your AFR, Ignition Timing, or any other handheld tune able value, such as IAC or Acceleration Enrichment * Expandable storage via included micro-SD, allowing quick access to ECU calibrations, datalogs, or any other files you may use with your Holley EFI system * Capacitive touch--no stylus required * Convenient dimming feature for nighttime driving, simply press the Sniper EFI icon on the background to quickly dim or brighten the screen
( 2 )
$449.95
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$121.95
—
$125.95
Holley EFI Digital Dash I/O adapter with wiring harness kits offer more performance from your digital dash. Available terminated or unterminated, these vehicle harnesses provide 10 additional inputs/outputs to your 7 in. unit. They can be configured for gauges or switches and data-logged locally through your digital dash. The adapters bring out connections to a waterproof 26-pin connector, similar to ones used on EFI units, and the kits include a USB memory stick to update digital dash firmware that supports the adapter.
( 3 )
$349.95
—
$399.95
Holley EFI CAN adapter harnesses are available in several options. Offered are male to female harnesses in several lengths for Racepak and other external CAN devices, harnesses that adapt 2-pin Holley main harness CAN connectors to newer 4-pin CAN devices, and kits that directly connect Racepak Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors. Create secure connections with genuine Holley EFI CAN adapter harnesses.
Not Yet Reviewed
$65.85
Holley EFI benchtop harnesses are designed for benchtop testing and setup of HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes. They are great for ECU diagnostics that do not require a running engine, firmware updates, or 7 in. dash calibrations. The harness has pre-terminated connectors for the following sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI connectors for a Sniper main harness. Also includes a power switch for quick setup in your workspace. Power and ground flying leads need to be connected to your battery or power supply (not included). Key features: * Terminated connectors for multiple EFI inputs * Included power switch allows for a quick "install" on your test bench * Optimal for ECU diagnostic, firmware updating, and pre-configuring dash layouts * Works with HP, Dominator, Terminator X, Terminator X Max, and Sniper ECU's, as well as 7 in. dashes * Has pre-terminated connectors for these sensor inputs: CAN, Crank, Cam, TPS, Input (1), P1A, Main Power, and Sniper EFI main harness connectors
Not Yet Reviewed
$231.95
Holley EFI 8-Channel CAN EGT (Exhaust Gas Temperature) controllers are designed exclusively for use with Holley's 8-Channel EGT monitoring kit to measure both exhaust gas and cylinder head temperature. Knowing the exhaust gas temps of each cylinder in your engine may not only help you find potential horsepower that you've left on the table, but also pinpoint weak links your engine may have—allowing you to perform fuel adjustment at the cylinder level. Features include: * 8-Channel CAN EGT module * Plug-and-play for a quick and easy installation * EGT module main harness (4 ft.) * Compatible with Holley HP and Dominator ECU * Requires EGT probes (sold separately) * Requires V5 Build 100 or newer software/firmware
( 1 )
$876.95
Holley's EGT caps are quality replacement service parts designed exclusively for use with Holley's 8-Channel Exhaust Gas Temperature Monitoring kits (sold separately). These EGT caps are made from 316 stainless steel and fit the Holley 1/4 in. EGT bung fittings, They're sold individually or as a set of eight.
Not Yet Reviewed
$19.99
—
$135.95
Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding
Not Yet Reviewed
$312.95
Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple
Not Yet Reviewed
$182.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
