Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Showing In Stock Items. Show All 36 Items.
On Sale
MSD Pro-Billet Distributors
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 409 )
$849.95
$350.95
—
$763.95
On Sale
MSD Pro-Billet Locked-Out Distributors
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$479.95
—
$511.95
$430.95
—
$459.95
On Sale
Holley EFI Dual-Sync Distributors
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$716.95
$281.55
—
$665.95
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$562.95
$310.11
—
$562.95
On Sale
MSD Direct Ignition Systems
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$2,049.95
$649.95
—
$1,843.95
ACDelco GM Genuine Parts Ignition Control Modules
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 2 )
$62.50
—
$219.99
ACDelco Gold Ignition Control Modules
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 16 )
$42.99
—
$127.99
On Sale
Holley Sniper EFI Low Profile SBF Dual Sync Distributors
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$562.95
$505.95
ACDelco Ignition Coil Mounting Brackets
ACDelco ignition coil mounting brackets are GM-recommended replacement parts. These original equipment brackets deliver the ideal fit and function to restore support of your ignition coil. They're manufactured from steel and given a black finish. The brackets are available in models for hundreds of vehicles from the 1990s and up. Keep your ignition coils securely in place with ACDelco ignition coil mounting brackets.
( 2 )
$21.99
FuelTech FTSPARK GEN II Ignition System
The FuelTech FTSPARK GEN II is an extremely high-energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing. It's developed for high-horsepower combinations and test-proven on 5,000+ horsepower engines! Compatible with any ECU on the market, this system is able to generate a spark with up to 750mJ (mJ=mili Joules) of energy—and is capable of firing the spark with 140 amps of current in the coil primary. With these features, FTSPARK generates a spark with approximately 5x more energy and 10x more current compared to a SparkPRO, ensuring a burn in any condition, especially in extremely rich air/fuel ratios. Models are available for 4-, 6-, or 8-coil applications. Technical description: * Programmable energy via CAN or digital input to adjust the energy level; - 475 V in the primary of the coil, which helps to prevent interference in the system * 140 amps of current in the primary of the coil with Racing CDI FuelTech coil for FTSPARK 750mJ * CAN communication with FuelTech PowerFT ECUs for diagnostic and datalogging * Automotive connector with gold-plated terminals * Serial bus (1 wire) allows the use of only one ECU output that triggers all ignition outputs (only with PowerFT) * Anodized aluminum and plastic case * Maximum working temperature: approximately 212 degrees F * Supply voltage for full power: 14-26 V. Minimum voltage for starting 8 V * Maximum operating frequency: 670 Hz * Compatible with other ECUs on the market. Check compatibility of your ECU with FuelTech tech support Contents of package: * One FTSPARK (GEN II750mJ or EXTREME) module * Installation and operation manual * Mounting hardware kit (4 rubber mounts, 8 washers and 8 nuts)
Not Yet Reviewed
$2,299.00
PerTronix Flame-Thrower Magnetic Trigger Billet Distributors
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$310.96
—
$428.23
PerTronix Flame-Thrower HC Ignition Coils
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$116.39
Holley Crankshaft Trigger Wheels
Get the best possible sensor pickup with Holley crankshaft trigger wheels. These wheels have 60 notches, plus one TDC double notch. They are available in a number of different sizes to support the clearances on different engines from 5 in. to 8 1/2 in. in diameter. The center hole is 1 in. in diameter and may require machining for application.
Not Yet Reviewed
$306.95
Ford Performance Parts High-RPM Ignition Pulse Rings
Ford Performance Parts high-rpm ignition pulse rings are designed and built to support higher rpm engine builds. Do you need to significantly extend your engine's rpm? Whenever you need parts for your Ford, the best and only choice should be the people who know your vehicle best--Ford Performance Parts.
( 1 )
$93.99
Allstar Performance Distributor Caps
Allstar Performance distributor caps have high-output coils and adjustable vacuum advances, perfect for upgrading stock HEI distributors for higher rpm. The housings are CNC-machined 6061 T-6 aluminum with an upper support bearing to provide accurate timing at higher rpm—and include a snap-on spark plug wire retainer, along with instructions to facilitate installation.
( 1 )
$21.99
—
$26.99
Allstar Performance High Performance Distributors
Timing is key in a well-running car, and Allstar Performance high performance distributors can help keep you on target. They have an upper support bearing to provide you with accurate timing at higher rpm. Manufactured from 6061-T6 aluminum and CNC-machined, these housings are built to handle high-rpm stress and remain looking good, too. Designed for use with an aftermarket control box and an external coil, Allstar high performance distributors fit small and big block Chevys and Fords. Allstar high performance distributors will help keep your timing true. Distributors include: * Advance springs * Advance stop bushings * Manifold gasket * O-rings * Spark plug wire retainer cap with screws * Instructions for a no-hassle install
Not Yet Reviewed
$229.99
—
$299.99
Lingenfelter RPM-003 Digital RPM Window Switches
Lingenfelter RPM-003 digital rpm window switches provide microsecond precision! These switches from Lingenfelter Performance Engineering are capable of performing as standard rpm-activated switches or they can provide "window" switch-type capability, switching when one rpm level is reached and then switching back when a second rpm set point is reached. The digital rpm window switches utilize a precision 32-bit timer to realize microsecond precision over a very wide operating rpm range, and they support most common tachometer pulse frequencies, without additional components being required. Lingenfelter RPM-003 digital rpm window switches also feature: * Two-color LED for error codes and operating condition notification * Custom-molded, high-temperature, glass-filled Nylon 6 enclosure * A tachometer pull-up resistor enabled by a dip switch setting inside the back cover * An analog 0-5 V input signal that can provide TPS, clutch sensor, or MAP sensor input
( 4 )
$132.00
Motorcraft Distributor Replacement Parts
Motorcraft distributor replacement parts restore ignition performance in your Ford. They are manufactured from high-quality materials and tested to meet strict requirements. It is critical to use the parts that support your Ford, Lincoln, and Mercury vehicles to ensure an easier install and the best performance. Choose Motorcraft distributor replacement parts for the right fit and function.
( 1 )
$1.99
Daytona Twin Tec TC88 Ignition Kits
Just do it. Installing Daytona Twin Tec TC88 ignition kits are one of the best things you can do to your bike. With them, you'll pull harder, start faster, won't foul the plugs, and it'll idle great, too. If you're looking for a more adaptable and tunable upgrade and timing advance modifications to accommodate stock to customized engines, their adjustability factor and easy plug-in installation are the big reasons for their use, as well as the easy to dial-in, digitally set rpm limits with a selectable multi-spark mode for quick starting and smooth cruising. Daytona Twin Tec's product focus is electronic fuel injection and ignition systems for Harley-Davidson® motorcycles. These modules support all sensors, including theft/security systems, and include the TC88 ignition, coil, and wire sets. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$484.95
Allstar Performance HEI Distributors
If you're looking to upgrade your stock HEI, Allstar Performance HEI distributors are perfect replacements. They have high-output coils and adjustable vacuum advances. Housings are manufactured from CNC-machined 6061-T6 aluminum with an upper support bearing to provide accurate timing at your higher rpm. Allstar HEI distributors include snap-on spark plug wire retainers and instructions for a trouble-free swap of your old stock piece.
Not Yet Reviewed
$184.99
K Tool XD Under Hoist Stands
K Tool XD under hoist stands provide added support to stabilize a vehicle (or heavy part) that's suspended by an above-ground lift—during the positioning and installation or removal of vehicle components. The stands have a heavy-steel construction for added strength and durability. They also feature a quick-adjust spin handle with thrust bearing to provide ease of turning under load, and an ACME all-thread screw rod to make fine adjustments with a variety of load heights. The stands are available in single-leg or tripod stand models, with varying height and weight capacities. K Tool XD under hoist stands are ideal for transmissions, engine mounts, exhaust systems and more—no pro shop should be without one!
Not Yet Reviewed
$171.99
Standard Motor Ignition Coil Brackets
Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.
Not Yet Reviewed
$8.99
—
$9.99
MSD Coil Current Boosters
MSD coil current boosters provide added power to your Ford coil-on-plug engine to support additional horsepower. They also provide a 2-step rev limiter to consistently launch your car off the line. The MSD boosters increase the peak current at the ignition coil and spark energy at the plug gap, making them ideal to support engines with increased cylinder pressure from bumped-up compression ratios, a shot of nitrous, or boosted applications. The 2-step rpm adjustments are made via two rotary switches adjustable from 1,000 to 10,900 rpm, in 100 and 1,000 rpm increments. Just plug them in to the factory wiring and hook up the activation wires as needed and you're set. MSD coil current boosters feature: * Increased current at the ignition coil * Increased spark energy at the spark plug * Built-in 2-step rev limiter for consistent launches and quick 60 ft. times * Quick, easy solution to increase ignition power on Ford modular engines * Factory-style wiring connectors plug directly into stock coils and harness
Not Yet Reviewed
$649.95
FAST XDi Sportsman Distributors
FAST XDi Sportsman distributors are designed to deliver the most accurate trigger signal possible throughout the entire rpm range of your race engine. This is accomplished through the use of an advanced Hall-effect style pickup, which is then converted to a signal that most CD ignition controls accept. The benefit of a Hall-effect pickup is: there is no retard, commonly called magnetic pickup compensation—so you can ensure your timing remains stable from idle to race rpm. Inside the CNC-machined billet housing is a polished stainless steel shaft that is supported with sealed ball bearing on the top and a long bushing on the bottom. They've also reduced end play in the distributor to take out any timing variations and damage to the gear. FAST XDi distributors are supplied with high-quality rotors and caps, and are available with a large diameter Ford-style cap or smaller diameter GM points size cap with HEI terminals, as well as either a steel or bronze gear. Order the Sportsman tailored for your year/make and engine application.
( 1 )
$393.95
—
$466.95
