Availability
Showing In Stock Items. Show All 78 Items.
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 151 )
$58.98
—
$112.98
Increase your miles per gallon by up to 15 percent with a set of these Granatelli Motor Sports MPG Plus spark plug wires. They feature zero Ohms per foot of resistance and a solid stainless steel inner core for maximum conductivity. The wires provide faster engine startup and a smoother running engine, as well as increased horsepower and torque. Go green and install a set of Granatelli Motor Sports MPG Plus spark plug wires on your daily driver or high performance vehicle.
( 13 )
$367.63
Compu-Fire DIS-IX distributorless ignition systems for your Bosch 009 distributor provide triple the energy of traditional electronic ignition systems. You'll realize the benefits of the maintenance-free, instant starting setup in these bolt-on, plug-and-play systems. The distribution and the switching functions have been eliminated, but you still have need for the timing function, and the body of a Bosch 009 contains a robust centrifugal-advance mechanism that fulfills that role in a practical, inexpensive, and reliable manner. DIS-IX systems include: * Custom high-energy 60,000 V coil pack * Silicone spark plug wires * All electronics, wiring, and connectors * Mounting hardware.
( 4 )
$368.15
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$502.87
$161.89
—
$1,025.54
Do you need more firepower? Davis Unified Ignition Jeep Firepower ignition kits have the components that you need to make your Jeep an energy machine! They start with the Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber, and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! And, you'll experience no drop in power when you hit the accelerator, like you do with notorious stock coils. To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires is included. The LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures. Some Jeep kits, depending on the application, include brass terminal caps and rotors as well. Give your ride the added power it was built to handle with Performance Distributors Jeep Firepower ignition kits.
( 8 )
$219.00
—
$249.00
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$308.98
—
$878.75
Your Ford Focus may be small, but you can make it mighty with Performance Distributors Firepower ignition kits. These ignition kits feature Screamin' Demon coils that allow you to open up your spark plug gaps a whopping .065 in. to burn your fuel more completely! The longer duration spark keeps your spark plugs cleaner, while brass coil connectors ensure maximum conductivity. To deliver every ounce of high-voltage spark produced, a set of LiveWires is included. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures--up to 1,400 degrees! The LiveWires are custom-fit, precut, and numbered at each end to correspond with the correct cylinder. Set your aim on high performance with the easy-to-install Firepower ignition kits from Performance Distributors.
( 6 )
$189.00
So you feel like no one pays attention to your Ford truck? Well, Performance Distributors are ready to add high performance to your rig with 6-cylinder Firepower ignition kits! No longer will you be ignored when you add these energy systems under your hood! They begin to address your needs with their high-output Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! So, the next time you "step on it," your truck will respond like a champ! To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires enhances your upgrade. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures and provide a great high performance look for your V6. LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. Don't go unnoticed any longer. Performance Distributors puts you in the performance market with their 6-cylinder Ford truck Firepower ignition kits.
( 11 )
$239.00
Does your rig need a tuneup? OMIX-ADA ignition tune-up kits provide the components you need to do the job. They are available for several years and models. Restore performance to your rig with OMIX-ADA ignition tune-up kits.
Not Yet Reviewed
$123.99
PerTronix Flame-Thrower ignition system bundles offer improved performance with more horsepower and better throttle response. Plus, they include everything you need in one box at a great price. Each of these bundles includes: a Flame-Thrower billet plug-and-play distributor with Ignitor II or Ignitor III module technology; a matching low-resistance Flame-Thrower chrome coil; and a set of Flame-Thrower 8mm MAGx2 universal wires (featuring silicone jackets) to resist high temperatures. PerTronix Flame-Thrower ignition system bundles typically offer a choice of red or black cap, and they're available for the most popular Chevrolet and Ford engines, as well as Chevy marine engines.
( 6 )
$496.50
—
$574.50
Now you can have a balanced performance ignition system that is designed to make the most horsepower without mixing and matching components. ACCEL Motorcycle Super Single Fire ignition systems are complete bolt-on systems that are designed to work together to produce an adjustable ignition that outperforms others. Each Super System includes the adjustable ignition module, a Single Fire Super Coil, ACCEL high performance U-groove spark plugs, and ACCEL black 8.8 performance spark plug wires. These systems are easily installed and simply adjusted with switches on the module to produce the performance to match your machine.
Not Yet Reviewed
$949.95
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$724.95
—
$922.95
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$150.98
Clearance
ACES High Roller Pro ignition packages are complete ignition systems offering the latest technology, strongest spark, and precision performance. All kits include: * Black Jack Pro billet distributor * Black Jack Pro ignition coil * High Roller Pro CDI ignition box with handheld touch screen controller, mounting hardware, and connectors * Black Jack Pro ceramic boot spark plug wires
Not Yet Reviewed
$799.99
$479.50
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$632.95
—
$1,999.95
Summit Bucks
Daytona Twin Tec Model 1006 and 1007 external ignition kits are external plug-in ignition modules for 1990 and later Harley-Davidson® Evolution Big-Twin and 1990-1993 Sportster models. They offer a wide timing advance adjustment range that accommodates stock to highly-modified engines. Features include: * Digitally set rpm limit in 100 rpm steps * Selectable single or dual-fire modes * Selectable multi-spark mode for quick starting and smooth cruising * Coil outputs protected against short circuits * Available USB interface and software for programming custom advance curves (sold separately) * Billet aluminum housing with black anodized finish * Easy plug-in installation
Not Yet Reviewed
$476.95
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$592.00
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$1,249.95
Davis Unified Ignition Crossfire cap and rotor kits are an effective solution for the often-tangled mess created where your ignition wires connect to the distributor. These organized units allow your spark plug wires to be routed in numerical sequence—with wires for the left bank of the engine all exiting on the left side of the distributor in order, and the right bank wires exiting to the right side. No wires criss-cross anywhere, making your engine bay look clean and orderly, while eliminating the possibility of arcing between plug wires.
( 34 )
$89.99
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$276.95
$117.95
—
$299.95
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$79.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
