Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Showing In Stock Items. Show All 32 Items.
Biondo Single Shift RPM Activated Switches
Biondo single shift rpm activated switches can handle up to four adjustable digital shift points. Feature/Spec: * Auto reset--no buttons to press * Shifts from one to four gears * Ignition On/Off input to disable shift output when not in use * Mounting tabs for easy installation * Microprocessor-controlled timing * Retain all numbers when powered off * Large LCD * 3,000-9,900 rpm range can be changed by pushing the buttons on the face of the unit * Test your shifts by holding down either button for two seconds * Two separate outputs--normally open, and closed (for CO2, air, or electric shift applications)
( 8 )
$271.99
Manufacturer Rebate
AutoMeter Level 1 Digital Pro Shift Controllers
The new technology in these AutoMeter Level 1 digital Pro Shift controllers makes it possible to do away with traditional plug-in chips, while providing a combination of features only previously available on the larger Shift-Lite and Playback tachometers. These Level 1 controllers feature a single programmable shift point and a digital rpm display and are compatible with 4-12 cylinder engines.
( 3 )
$149.99
On Sale
MSD Programmable Shifter Controllers
RPM control for your transmission—MSD programmable shifter controllers allow you to set different rpm points to trigger the shift solenoids. Any configuration may be used on up to a 6-speed transmission. The controllers feature six LEDs on their end panels. Programming can be done on a Windows-based PC or with MSD's hand-held monitor (not included). MSD programmable shifter controllers include: * Shift controller * Pro-Data+ software * 9-pin harness—10 ft. * 1-pin harness * Deutsch terminated harnesses * Butt splices * Ring terminals * Screws, nuts, and washers
Not Yet Reviewed
$899.95
$507.05
N2MB Racing WOT Boxes
N2MB Racing offers innovative electronics for your performance vehicle—including their WOT boxes. They add launch control and no-lift shifting abilities to any car, truck, motorcycle, or other fuel-injected vehicles, helping cut tenths of seconds off your quarter-mile runs. Gain the upper hand in your race circuit competitions with N2MB Racing WOT boxes!
( 2 )
$219.00
On Sale
MSD Power Grid 7 Ignition Boxes
MSD offers these Power Grid 7 ignition boxes as part of the Power Grid 7 ignition system. These ignition boxes pack higher output than other current programmable units. When used with the Power Grid 7 system controller, these USB-compatible boxes offer advanced programming for ultimate control over your rpm and timing. They provide five retard stages for nitrous and four steps of rpm limits for burnouts, spool, launch, and overrev. MSD Power Grid 7 ignition boxes' output switch can be set on rpm, pressure, or time. Power Grid 7 ignition boxes have shift light settings for each gear, and the ignition data acquisition accepts multiple runs.
( 11 )
$735.95
$661.95
On Sale
MSD Power Grid System Controllers
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$665.95
$340.15
—
$1,449.95
MSD Ultra 7AL Ignition Boxes
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
( 1 )
$819.95
On Sale
MSD RPM Activated Switches
From light bulbs, to the high-speed retard function on an MSD timing computer, to air shifters, these MSD rpm activated switches turn on almost anything. They use MSD's plug-in rpm modules to turn on your components at any rpm you select.
( 18 )
$181.95
$163.75
On Sale
MSD 6M-3L Marine Ignitions
MSD has raised the bar with their 6M-3L marine ignitions. They are fully-sealed units featuring single wiring connectors that make installation a breeze. Each ignition box is designed with three rotary dials and an LED display to simplify setting the cylinder select, start retard, and rev limiter--plug-in rev limiter chips and hard-to-read dials are a thing of the past. For diagnostic purposes, the LED displays can also be set to a "live" tachometer mode on V8s and will even display the battery voltage with just a quick turn of a knob. Boasting more features and higher spark energy than its predecessor, MSD 6M-3L marine ignitions are definitely performance upgrades your boat needs! Additional features and benefits include: * Large, easy to read LED display * Shift interrupt feature eases shifting * MSD's smoothest rev limiter yet, protecting parts and saving your engine * Records highest rpm the engine turned for last 20 minutes of run time * Easy setup of features with three rotary dials on the face of the unit * Built-in start retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED display shows rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy and easy starting down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Fully potted housing to withstand demanding marine conditions * Sealed connector for clean wiring and trouble-free operation * Works on 4, 6, and 8 cylinder engines * Reverse polarity and overheat protection provide ultimate reliability * Can be triggered by magnetic pickup, amplifier, and points inputs
( 1 )
$614.95
$552.95
MSD 6EFI Ignitions
MSD 6EFI ignitions are capacitive discharge ignitions designed to work in harmony with electronic fuel injection systems. They come with detailed wiring instructions, making installation a breeze. Increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire rpm range are all benefits of adding these ignition controls to your fuel injected engine. They feature built-in rev limiters that will protect the engine in the event of a missed shift or driveline failure. If you have a 4, 6, or 8-cylinder engine with EFI, MSD 6EFI ignition controls will connect and fire it up! MSD 6EFI ignitions feature: * Detailed instructions for installation with various EFI systems * Compact design * Adjustable rev limiter for over-rev protection with rotary dials in 100 rpm increments * Works on 12 V electrical systems using a distributor * Easily connects to magnetic pickup, electronic, and even points distributors
( 11 )
$185.99
Manufacturer Rebate
AutoMeter Distributorless Ignition Tachometer Adapters
Need to install a tachometer in your late model distributorless vehicle? AutoMeter has the solution. These tach adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift light installed.
( 29 )
$113.99
On Sale
MSD 6TN/6ALN NASCAR CD Ignitions
These MSD 6TN and 6ALN ignitions are the ultimate choices for superior performance in harsh racing conditions. With sturdy vibration mounts and CD circuits encased in a clear 2-part silicone elastomer, they are virtually vibration-proof. A specially designed, weathertight, 6-pin connector meets NASCAR's 20-6.1 ignition wiring rule and provides a tight, positive-locking connection with individual seals to keep dirt and moisture from each connection. The 6TNs are equipped with a special 4-pin connector that plugs directly into an MSD soft touch rev control, while the 6ALNs have a built-in rev control. These rev controls are adjustable with plug-in modules and will save your engine from overrev damage caused by missed shifts or driveline failures. They'll work with virtually any 4, 6 (even-fire V6 only), or 8-cylinder engines.
( 6 )
$535.95
—
$688.95
$481.95
—
$619.95
On Sale
MSD Programmable Digital-7 Plus CD Ignitions
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,126.95
$1,013.95
Mallory HyFire V Ignitions
Mallory HyFire V ignitions offer a modern twist on a familiar name! Needing no introduction, the HyFire ignitions feature modern electronics ready to deliver a powerful punch packed inside retro-style cases. These capacitive discharge ignitions supply multiple sparks at low rpm for a clean idle and quick throttle response. And since the HyFires provide powerful spark through redline, a built-in adjustable rev limiter will help tame your beast in case of a missed shift or driveline failure. The rev limiter is adjustable in 100 rpm increments with easily adjustable rotary dials. Features include: * Modern capacitive discharge ignition technology * Retro design for classic good looks * Connects easily to points, amplifiers, and magnetic pickup distributors * Adjustable rev limiter for over-rev protection * Multiple sparks at low rpm for improved starting, clean idle, and snappy throttle response
( 11 )
$255.99
On Sale
MSD Tach Signal GMR Pickups
MSD tach signal GMR pickups simply attach, with no splicing or cutting, to a current-carrying wire, and turn that information into a 12 V rpm signal. That signal can then be used to activate a shift light, rpm activation switch, or tachometer.
( 7 )
$114.95
$103.45
Shifnoid Adjustable RPM Modules
Shifnoid Adjustable RPM modules allow you to select any rpm between 1,000 and 11,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using a starting line launch limiter burn out limiter, shift point or top end maximum RPM limiter. Designed to work with most ignition systems, the Shifnoid adjustable RPM modules allow you to dial-in just the right RPM needed.
( 10 )
$29.99
On Sale
MSD Adjustable Low RPM Modules
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$54.05
$48.65
On Sale
MSD Digital E-Curve Pro Billet Distributors
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$870.95
$782.95
—
$870.95
FAST XR-i Points-to-Electronic Ignition Conversion Kits
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM
( 24 )
$86.95
—
$149.95
On Sale
NOS Two-Stage Wide Open Throttle/RPM-Activated Window Switches
NOS two-stage wide open throttle/rpm-activated window switches are a compact, user-friendly way to eliminate the need for replacing rpm pills every time you want to change the activation rpm of your nitrous kit. They take window switches to the next level, too, eliminating the need for two rpm-activated window switches to control your two stages of nitrous! NOS two-stage wide open throttle/rpm-activated window switches feature two fully programmable independent rpm window switches. They can operate from 0 to 20,000 rpm for anything from a low-rpm engine to a high-revving sport bike, and they are perfect for carbureted or EFI vehicles. Their capability to read a rising or falling throttle position sensor provides accurate activation--every time. A programmable output activates a shift light for on-time, gear-pounding shifts, and the recall feature shows max rpm and TPS voltage for easy setup. NOS two-stage wide open throttle/rpm-activated window switches have a bright, easy-to-read display and bright LEDs that light up when stages are active for easy activation verification. These versatile switches can be used for nitrous or to activate other accessories.
( 10 )
$306.95
$276.25
Biondo Elite Time/RPM Activated Switches
Biondo Elite time/rpm activated switches are designed for racers who want to shift by time, rpm, or a combination of the two--and they have several improvements over the original Elite rpm switches. They can shift up to five times by either time or rpm, and have an expanded rpm range from 3,000 to 19,999 that can be entered for any shift. Each time a shift occurs during a pass, the time and rpm of the shift are stored in memory for review after the pass. Biondo Digital Delay Elite time or rpm switches feature a push-button input that allows the switch to start the shifting routine with the release of a button, and can be tied to the trans-brake solenoid to start the shift routine when the trans-brake releases, if desired. When the Start Pass rpm is being used to start the shift routine instead of the push-button input, the push-button can be set to Burnout Mode to keep the box from shifting during the burnout. Features/specifications: * Face size: 4 3/8 in. x 3 5/8 in. x 1 in. * Overall size: 5 3/4 in. x 3 5/8 in. x 1 in. * Selectable output N.C. or N.O. * Built-in digital tach with peak rpm and review feature * The backlit display, with two lines of text * Compatible with 4-, 6-, and 8-cylinder engines * Compatible with most ignitions * 40 amp high-current output
Not Yet Reviewed
$304.99
Shifnoid RPM-Activated Switches
Shifnoid rpm-activated switches can be used to activate CO2 or electric shifters, nitrous oxide solenoids, shift lights, timing computers, or any other device that needs to be activated at a preset rpm. They accept plug-in modules, so you can set your specific rpm. The Shifnoid rpm-activated switches are 12 and 16 V compatible and have been designed to work on V8 engines.
( 4 )
$148.99
Manufacturer Rebate
Dedenbear RPM2 Switches
Dedenbear RPM2 switches feature push-button thumbwheels to let you select any shift point in 100 rpm increments, from 1,000 to 9,000 rpm. The switches sense rpm using MSD, Mallory, Crane, or any other standard ignition system. They have a 0.5-second delay feature that wires into the transbrake, or roll control to prevent false shifts due to tirespin, converter flash, or launch.
( 1 )
$339.99
Lingenfelter Performance Engineering STOV-004 Vehicle Speed Based Switches
The Lingenfelter Performance Engineering STOV-004 is a vehicle speed-based switch that can be used to enable or disable devices based on vehicle speed—much like an RPM switch or RPM window switch, but instead based on vehicle speed. The STOV-004 also provides a 0-5 volt analog output corresponding to vehicle speed that can be used to provide a vehicle speed signal to many other add-on devices. These switches can accept the vehicle speed output signal from most engine control modules and can also connect directly to many common speed sensors. The Lingenfelter STOV-004 can also provide a stage/gear shift output for boost controllers and other devices that need to see a gear shift position switch output to change stages. Product features: * Accepts a wide range of pulse count frequencies from 100 to 60,000 pulses per mile (PPM) * Works with ECM output signals and stand-alone Hall effect-type speed sensors * Easy-to-use vehicle speed learning mode using push-button switch in the back of the module * Set the PPM count even when you do not know the PPM configuration of the vehicle * Built-in vehicle speed sensor signal pull-up resistor that is enabled by a DIP switch setting inside the back cover for applications that require a pull-up resistor * Simplifies wiring * Easy to adjust high and low vehicle speed settings via four front-mounted 10-position switches * Provides switched outputs or window switch outputs based on vehicle speed * Provides ECM/PCM vehicle speed frequency to analog voltage conversion Available output types: * Normally ON ground * Normally OFF ground * Normally ON +12vdc * 0-5vdc/0-250 mph linear analog output Stage/gear shift output mode works with multi-stage boost and nitrous controllers including: * Turbosmart eBoost2 * NLR AMS1000 * Leash Electronics Boost Leash Gear-Based controller Benefits: * Easily adjustable activation point in 1 mph increments * Enable nitrous or an additional stage of nitrous-based on vehicle speed * Enable a boost controller for increased boost above a certain vehicle speed * Disable fans above a certain vehicle speed * Lock a torque converter clutch above a certain vehicle speed * Disable a 2-step once the vehicle is moving so that it does not activate on each gear change
( 2 )
$140.55
