Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Showing In Stock Items. Show All 75 Items.
Lingenfelter TRG-002 58x-24x Crank Sensor Trigger Conversion Modules
Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.
( 34 )
$303.99
Racepak Hall Effect Driveshaft Sensors
Racepak Hall Effect driveshaft sensors take advantage of the magnetic field created by simple magnets. It allows the sensors to generate a measurable voltage output known as the Hall Effect. This output can be gauged to accurately determine things like driveshaft or wheel rpm. These metal devices feature a 5/16 in. fine thread pitch on one end and a 3-pin Molex connector on the other for installation. Racepak Hall Effect driveshaft sensors work with several models of Racepak data loggers and dashes.
Not Yet Reviewed
$224.95
DIYAutoTune Hall Effect Sensors
DIYAutoTune hall effect sensors can be used as crankshaft or camshaft position sensors, and are also suitable for use as vehicle speed sensors (VSS). The threaded bodies feature a red anodized finish and includes two M12 mounting nuts. They run off 5 to 24 V and gives a nice square wave, so there's no variable voltage issues. Specifications are: * Operating voltage: 5 to 24 V * Maximum over-voltage and reverse voltage: +30 to -24 V * Maximum supply current required: 6 mA * Maximum output current sinking: 20 mA * Output type: Open collector * Triggering options: Magnet or ferrous metal * Maximum frequency: 15 kHz * Temperature range: -40 to +125 degrees C * Nominal air gap: 1.5mm * Thread pitch: M12 x 1mm * Overall length: 65.5mm, not including wires * Sensor material: Aluminum * Sensor orientation: Not directional * Recommended tooth size is a rectangle measuring at least 2.5mm x 6.35mm, with a 5.0mm tooth height.
( 3 )
$102.99
FuelTech Driveshaft Sensors
FuelTech offers a variety of data acquisition components, including driveshaft sensors compatible with many advanced engine control and monitoring systems (ECU). They're available in different thread diameters. The primary purpose of FuelTech driveshaft sensors is to provide real-time, accurate driveshaft (rpm) data for advanced traction control systems to improve vehicle performance by allowing for faster, more precise adjustments to power reduction and tire slip detection. Benefits include enhanced performance through optimized fuel and ignition maps, improved data accuracy for logging and tuning, and reliable integration with FuelTech ECUs to push vehicles to their limits with greater precision and confidence.
Not Yet Reviewed
$229.00
REDARC Hall Effect Current Sensors
REDARC Hall effect current sensors measure the current flowing in a circuit and output the value of that current as a voltage signal. These electronic devices are high performance, compact, cable-mounted current sensors, suitable for installation into rugged environments where a fully sealed product is required to assure reliability. Compatible with both their single and dual voltage gauges, REDARC Hall effect current sensors are 100A rated and cannot be damaged by overload.
Not Yet Reviewed
$135.00
AiM Sports Inductive Contrinex Speed Sensors
AiM Sports Inductive Contrinex speed sensors are robust, non-contact sensors used in motorsport to measure wheel or axle speed by detecting ferrous metal targets (like bolts or teeth). They work with AiM data loggers to provide precise speed data, featuring vacuum-encapsulated electronics protected against vibrations, dirt, and high temperatures, making them highly reliable for harsh racing environments. Additional details: * Inductive sensors generate a magnetic field and detect metallic target interference * Detects ferrous metal such as steel. Non-ferrous targets reduce sensing range * Sensing range: Typically ranges from 0.5 mm to 2.5 mm, ideal for close-range detection * P67 rated (waterproof) and designed to withstand high vibration/heat * Available with plastic or metal connectors to integrate with AiM systems like EVO4S, EVO5, and MXL dashes * Often mounted on spindles, hub carriers, or near brake rotors to count, for instance, headbolts on a rotor * Common uses: -- Car/bike speed: Measuring wheel speed on formula cars or motorcycles -- Kart speed: Used with optional magnets or collars on 30mm/50mm axles to measure rear wheel speed * These sensors are often referred to as "fit-and-forget" due to their high reliability in demanding conditions
Not Yet Reviewed
$85.00
Standard Motor Camshaft Position Sensors
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 15 )
$224.99
PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 209 )
$119.66
—
$281.62
PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$149.34
—
$247.62
On Sale
Holley Hall Effect Crank Trigger Sensors
Holley Hall Effect crank trigger sensors are replacements for flying magnet crank trigger setups. These drop-in sensors are Hall Effect types--they output a square wave signal--ideal for use with most EFI systems. Replace your crank trigger sensor for your flying magnet setup with Holley Hall Effect crank trigger sensors. It does not detect a ferrous steel target.
( 4 )
$187.95
$169.15
ACDelco GM Genuine Parts Crankshaft Position Sensor Reluctor Rings
ACDelco GM Genuine Parts crankshaft position sensor reluctor rings are factory-recommended replacements. These OE parts will provide the same performance, durability, and service life you expect from General Motors. Order the model designed for your application.
( 5 )
$19.99
Sierra Marine Ignition Sensors
Sierra Marine offers distributor ignition sensors to fit your marine application. When OEM parts fail, Sierra Marine has the replacement parts that you need with perfect fit and performance.
Not Yet Reviewed
$66.99
On Sale
MSD Cam Sync Generators
After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.
( 2 )
$108.95
$98.05
Innovators West Crank Trigger Components
Innovators West offers quality crank trigger mounting solutions to fit their dampers properly. Made from high-quality materials to exacting tolerances, you can count on them for accurate timing—even at high-rpm levels. Order the model designed for your vehicle and engine application.
( 6 )
$162.80
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$232.77
—
$247.62
On Sale
Holley Sniper EFI HyperSpark Distributor Kits
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 23 )
$1,024.95
$921.95
On Sale
Holley Sniper EFI HyperSpark Distributors
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$716.95
$413.95
—
$649.95
On Sale
MSD Ultra 6AL Plus Ignition Boxes
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 9 )
$478.95
$430.95
On Sale
Holley EFI Dual-Sync Distributors
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$716.95
$281.55
—
$665.95
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$562.95
$310.11
—
$562.95
On Sale
Holley EFI Crank Trigger Kits
Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware
( 6 )
$699.95
$598.95
—
$767.95
On Sale
MSD Programmable Digital-7 Plus CD Ignitions
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,126.95
$1,013.95
On Sale
MSD Boost Timing Master Ignitions
If you run a blower, turbo, or even a naturally aspirated engine, MSD's Boost Timing Masters allow you to run at the edge of detonation for maximum power output. They can prevent detonation by automatically retarding the timing as your manifold pressure increases. The secret lies in a boost pressure sensor that's inside MSD's solid-state control box. The sensor reads boost pressure through a 1/8 in. vacuum hose attached to a boost pressure source. The result gives you peak power without harmful detonation. A dash-mounted control knob allows you to dial in the retard from 1 to 3 degrees per pound of boost pressure, up to a maximum retard of 15 degrees. Vacuum tubing is not included. These units must be used with an MSD 6, 7 or 8 series ignition.
( 6 )
$949.95
$853.95
On Sale
MSD Direct Ignition Systems
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$2,049.95
$649.95
—
$1,843.95
