Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Davis Unified Ignition Ford Street/Strip D.U.I. Distributors
Davis United Ignition Ford Street/Strip D.U.I. distributors are performance replacements for your daily driver, street rod, or off-road vehicle. Rated at up to 7,000 rpm, these simple all-in-one ignition systems have the coil inside the cap and the module inside of the distributor; drop them in, run one 12 V wire, and you're off with 50,000 V of pure spark energy! The high-voltage coil allows for wider spark plug gaps, while the increased dwell in the D.U.I. Dyna-Module produces a hotter spark to deliver the most complete burn of your fuel mixture. Street/Strip D.U.I. distributors are tuned for several Ford motor applications, creating a super-smooth advance curve and eliminating engine damage. They're built tough with oil-impregnated upper and lower bronze bushings for shaft stability, accurate trigger signals, and years of trouble-free service. D.U.I. caps are offered in red, yellow, black, blue, and clear—so you can watch the sparks fly! Give your ride more power, crisper throttle response, and more low-end torque with a Ford Street/Strip D.U.I. (Davis Unified Ignition) distributor from Performance Distributors.
( 79 )
$459.00
—
$525.00
Chevrolet Performance LS Engine Reluctor Wheels
If you're swapping an LS Series engine into your street rod, musclecar, or classic car, you're going to need one of these Chevrolet Performance LS engine reluctor wheels. They are designed to fit late model Generation III/IV Chevrolet LS Series engines. The reluctor wheels are available in different tooth counts to accommodate your specific year and engine combination.
( 7 )
$32.36
—
$63.49
MSD Firewall Feed-Thrus
MSD designed these firewall feed-thrus to prevent voltage leaks in passenger compartment mounted coil applications. Made from Rynite and nylon, they provide a 1/2 in. of insulation to ensure that the coil's spark reaches the distributor. They mount in a 1 in. diameter hole directly to the firewall and have high tension towers on each side, connected through a brass rod for full spark transfer.
( 26 )
$30.58
Stromberg E-Fire Electronic Distributors
Stromberg E-Fire electronic distributors actually look like they rightfully belong on your traditional flathead motor. They feature a simple, built-in electronic ignition. No points, no condenser, no black or red box, no maintenance--no worries. These crab-style units bolt on like a stocker with a black cap, and they're easy to properly install with just two wires to your regular coil. Order a Stromberg E-Fire electronic distributor for your Ford flathead and bolt it on—it works straight out of the box! Features and specs: * 2- or 3-bolt mounting options available to match your application * Available in your choice of 6 V positive or 12 V negative ground * Designed as short as possible with hot rod builders in mind, so you can use the stock fan * Timing adjuster is on the side, so you don't have to turn the whole body * Static timing, advance rate and max total advance specifically tuned to suit the flathead V8 * Old-school performance tag with a unique ID number * For use with a points-style 1.5 ohms coil only
( 11 )
$435.00
Edelbrock Pro-Flo 4 Ignition Coils
Edelbrock Pro-Flo 4 ignition coils are designed for use with electronic ignitions and produce an impressive 45,000 volts of power. Edelbrock kept the standard cylinder shaped housing and even gave it a satin black finish, so it will look right at home under the hood of your hot rod. These coils are an ideal complement to Edelbrock Pro-Flo 4 EFI systems.
( 14 )
$52.95
FAST XDi EZ-RUN Distributors
FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.
( 2 )
$297.95
—
$382.95
Engine Works RTR Distributors
Engine Works offers Ready-to-Run (RTR) race distributors for a wide range of applications—including many Chevrolet big block and small block V8 engines from 1955 and up. As the name implies, these drop-in replacement distributors include a built-in ignition module and connect by means of three wires (power, ground, and coil negative). They feature an aluminum housing, HEI (high energy ignition) in-cap coil, and your choice of cap colors. A very popular choice among street rod and muscle car owners!
Not Yet Reviewed
$272.46
K Tool XD Under Hoist Stands
K Tool XD under hoist stands provide added support to stabilize a vehicle (or heavy part) that's suspended by an above-ground lift—during the positioning and installation or removal of vehicle components. The stands have a heavy-steel construction for added strength and durability. They also feature a quick-adjust spin handle with thrust bearing to provide ease of turning under load, and an ACME all-thread screw rod to make fine adjustments with a variety of load heights. The stands are available in single-leg or tripod stand models, with varying height and weight capacities. K Tool XD under hoist stands are ideal for transmissions, engine mounts, exhaust systems and more—no pro shop should be without one!
Not Yet Reviewed
$143.99
FiTech Go-Spark Ready-To-Run Distributors
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$309.00
—
$409.00
United Pacific Ignition Coils
Whether you're looking for a standard quality replacement or a show stopper, United Pacific ignition coils should spark your interest. To make your classic hot rod stand out, United offers high-quality 6 V and 12 V coils with beautiful chrome housings to match most of your underhood chrome parts--or to stand out in a sea of black plastic or oxidized iron! The ignition coils are bundled with a 1.6 ohm ceramic coil resistor and a chrome coil mounting bracket.
( 1 )
$51.99
Engine Works HEI Distributors
Engine Works HEI distributors are a popular choice for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple clean installation and reliable operation. Plus, Engine Works has also addressed all the shortcomings typically found in an economy replacement. Get more power from a high-energy ignition than you ever expected with a HEI distributor from Engine Works. Order the HEI distributor model recommended for your vehicle and engine application.
Not Yet Reviewed
$103.71
FiTech Go-Spark HEI Distributors
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
Davis Unified Ignition Dodge Street/Strip D.U.I. Distributors
Whether you're driving a small block, big block, or Hemi, Performance Distributors D.U.I Street/Strip distributors will spark your hot rod into action with up to 7,000 rpm. The one-piece ignition systems are simple, drop-in units that are ready to run with one 12 V wire hookup. They send 50,000 V of pure spark energy to your plugs to fire the cylinders like nothing before. D.U.I. distributors feature high performance coils, Dyna-modules, and custom calibration for more power, instant throttle response, and no worries of pre-detonation. Virtually maintenance-free, these D.U.I. distributors are designed with upper and lower bushings for shaft stability, durability, and long service life. And, while you're improving your ride's performance, you're also improving its looks. These D.U.I.s eliminate all of the wiring found on stock systems so that your engine bay looks amazingly cleaner. Drop in power you can feel with Dodge D.U.I. Street/Strip ignition systems from Performance Distributors.
( 7 )
$429.00
—
$575.00
Davis Unified Ignition Dodge Racing D.U.I. Distributors
Whether you're driving a small block, big block, or Hemi, Performance Distributors D.U.I. racing distributors will spark your hot rod into action with up to 10,000 rpm. These one-piece systems are simple, drop-in units that are ready to run with one 12 V wire hookup. The racing distributors send 50,000 V of pure spark energy to your plugs to fire the cylinders like nothing before. D.U.I. distributors feature high performance coils, Dyna-modules, and custom calibration for more power, instant throttle response, and no worries of pre-detonation. Virtually maintenance-free, these D.U.I. distributors are designed with upper and lower bushings for shaft stability, durability, and long service life. And while you're improving your ride's performance, you're also improving its looks. These D.U.I.s eliminate all of the wiring found on stock systems so that your engine bay looks amazingly cleaner. Drop in power you can feel with Dodge D.U.I. racing ignition systems from Performance Distributors.
( 1 )
$499.00
—
$679.00
FAST I6 Induction Ignition Kits
Looking for an economical way to enhance the spark output of your street rod or muscle car? FAST I6 induction ignition kits are easy to install with breaker points or electronic triggers and deliver multi-strike, high-output sparks to improve your engine's idle, throttle response, and drivability. These kits are inductive ignition controls that improve the spark output and enhance the current and dwell control of the coil resulting in higher spark energy of up to 70 percent over OEM systems. From cranking speed through 2,000 rpm, there are a series of multi-strike sparks to enhance starting, idle, and low-speed cruising. Also, they have a smooth rev limiter that is adjustable in 100 rpm increments. Features: * Fits 4, 6, and 8-cylinder engines with a distributor * Up to 70 percent more spark-gap energy than stock ignitions * Max output up to 8,000 rpm for up to 9.5:1 compression ratio * Soft urethane encapsulation seals against moisture, dust, vibration, and heat * Points or module triggered * Built-in adjustable rev limiter in 100 rpm increments from 3,100 to 9,900 rpm * Inductive ignition with long duration spark * Low-cost boost retard with optional MAP sensor or 0 to 20 degrees of selectable nitrous retard
Not Yet Reviewed
$270.95
PRW Oil Pump Driveshafts
PRW distributor gears ensure precise ignition timing, resulting in optimal combustion. This leads to enhanced engine power, improved throttle response, and smoother acceleration. The high-quality materials and precision engineering of the gears contribute to their exceptional durability. You'll experience a steady and reliable power delivery, eliminating performance inconsistencies and surges that can impact your driving experience. Available in multiple lengths. Additional details: * Easily replaced * Oil pump drive rod and melonized gear * Precision CNC-machined * Resists wear, even when used with high-pressure oil pumps * Can be run with billet or flat tappet camshafts * Available for a variety of Mopar applications
Not Yet Reviewed
$180.95
FAST XDi EZ-Run Ignition System Combo Kits
FAST offers XDi EZ-Run ignition system combo kits for a variety of applications, including many Buick, Chrysler, Dodge, Plymouth, Ford, Oldsmobile, Pontiac, and Chevrolet engines from 1955 and up. These self-contained, "ready-to-run" ignition systems simplify installation and provide maintenance-free performance for V8 engines. They include a distributor with a built-in electronic module that can fire an ignition coil directly, eliminating the need for a separate ignition box. These kits are designed for a range of domestic V8 applications, ideal for daily drivers, muscle cars, and street rods—and are suitable for both carbureted and EFI systems. Key features: * The ignition module is built directly into the distributor, so no external ignition box is required * System features adjustable mechanical and vacuum advance for easy tuning to suit your specific engine * A magnetic trigger provides accurate spark timing, and the electronic module offers dependable, maintenance-free operation * The standard-size cap provides more clearance for the firewall and intake manifold compared to an HEI-style distributor. * Can be used with both carbureted and electronic fuel injection (EFI) systems * Kits typically include: -- A high-quality distributor with a built-in electronic module -- An ignition coil -- A rev limiter
Not Yet Reviewed
$731.85
—
$787.99
Twin Power Ignition Coils
If you want to increase peak spark voltage on your Harley-Davidson® by 20 percent or more, you need Twin Power ignition coils. These coils have a late OEM-style molded case and are high-quality, high-voltage replacements. They're designed for 12 V Harley® ignition systems—and will improve starting, prevent high-speed misfires, and increase mileage and performance. Twin Power ignition coils may come in OEM-style cases, but it's what's inside that counts.
( 1 )
$79.49
HardDrive Performance Coils
HardDrive Products performance coils offer increased spark performance in dual-fire and single-fire applications. Their high-power, 30,000 volts will typically increase peak spark voltage by 20 percent or more. This helps improve starting, stops high-speed misfires, and increases both mileage and overall performance. Plus, the ION Sense feedback is perfect for compatibility with stock Harley® EFI ECU models. When you want ignition parts engineered and produced by an industry leading manufacturer, order the HardDrive Products performance coils best suited for your ride.
Not Yet Reviewed
$67.46
Edelbrock LS1/LS6 Aluminum Ignition Coil Covers
Edelbrock LS1/LS6 aluminum ignition coil covers are a great, and affordable way to dress up Chevrolet Gen III LS Series engines. They are manufactured from cast aluminum and available in a natural, polished, or black powdercoated finish. These LS1/LS6 coil covers eliminate the need for the factory coil pack bracket by mounting the ignition coil packs directly to the underside of the covers. Install a set of the Edelbrock LS1/LS6 aluminum ignition coil covers and create a clean, custom under the hood look for your ride.
( 5 )
$353.95
—
$492.95
