Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Showing In Stock Items. Show All 153 Items.
ACCEL Mopar Remote Super Coils
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$80.85
ICT Billet Remote Mount Ignition Coil Relocation Brackets
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
On Sale
ACCEL Remote Super Coils
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 81 )
$86.77
—
$89.15
$66.72
—
$66.86
On Sale
ACCEL Mopar Remote Super Coil and Harness Combos
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$119.37
$110.46
Summit Racing™ Remote Mount LS Ignition Coil Relocation Brackets
Relocate your coil pack to a more open or out of the way area of the engine bay with Summit Racing™ remote mount LS ignition coil relocation brackets. Our kits include bolts and spacers, along with robust powdercoated steel brackets to securely mount your coil packs with a clean, professional look.
Not Yet Reviewed
$43.99
—
$69.99
Holley EFI Remote LS Coil Relocation Brackets
Holley EFI remote LS coil relocation brackets are available for all existing LS coil models, as well as for Holley EFI SmartCoils. These brackets are fabricated from lightweight aluminum and allows you to discreetly remote mount your LS engine coils at a location of your choice. Each Holley EFI bracket kit was custom designed, based on the specific coil model to ensure that the coils will mount as compactly as possible--size and shape between each kit will vary depending on the coil being used. Features include: * Eliminates OE coil-on-cover clutter * Designed to custom fit all LS ignition coil models * Fabricated from lightweight aluminum * Includes coil mounting hardware * Sold as a pair (coils not included) * Available in black or natural finish
( 4 )
$181.95
—
$242.95
Modern Classic Series Remote LS Coil Relocation Brackets
Modern Classic Series LS coil relocation brackets are an easy way to move your unsightly ignition coils off of your valve covers and out of view. These brackets are designed to fit round LS2/3 style coils. The brackets are constructed from laser-cut steel and are black powdercoated, so they will continue to look good for years. Includes two brackets and the necessary fasteners and spacers to mount eight coils. Note: Coils are not included.
Not Yet Reviewed
$135.95
ICT Billet Remote Ignition Coil Mounting Base Plates
ICT Billet remote ignition coil mounting base plates simplify the successful mounting of your coil packs over the valve covers. These aerospace-grade, billet aluminum plates fit all ICT Billet LS remote coil brackets and S10 accessory brackets. Each ICT Billet remote ignition coil mounting kit includes two plates and mounting hardware.
( 1 )
$113.99
On Sale
Moroso Remote Coil Mounting Brackets for LS Engines
Moroso remote coil pack mounting brackets allow you to mount your coil packs away from the valve cover and high engine temperatures on your LS engines. They feature stainless steel, non-magnetic studs to help prevent potential crossfire from the coils. These brackets will accept OEM and larger aftermarket ignition coil packs and can be used with Moroso Ultra 40 spark plug wire sets.
Not Yet Reviewed
$259.99
$233.99
Holley Sniper EFI HyperSpark Ignition Coils
Holley Sniper EFI HyperSpark ignition coils are the perfect ignition upgrade to complement your Sniper EFI installation. This high-output coil produces 135mJ of spark energy when used with the HyperSpark ignition box, ensuring complete combustion. The ignition coil comes self-contained in its own mounting bracket, and mounting hardware is provided to facilitate installation. Holley Sniper EFI HyperSpark ignition coil features: * Works with Sniper EFI for easy plug-and-play installation * Ignition coil connector removes any doubt of loose connections at the ignition coil * Integrated ignition coil bracket simplifies mounting ignition coil
( 44 )
$62.75
On Sale
MSD Pro Power Coils
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$211.95
MSD HVC-3 Coils
MSD HVC III coils utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material, which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting-edge winding material that has improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning-quick rise time, and longer spark duration. The MSD HVC-3 coils are equipped with an industry-first third terminal to allow secondary current sensing, for each spark, when used in conjunction with the MSD 8001 Pro 600 Single Channel ignition. Product details: * Designed for racing applications with an MSD 7 or 8 Series ignition control or Pro 600 single channel * New U-Core winding design produces more voltage and current * 70:1 turns ratio and lower primary resistant compound for vibration resistance * Windings are encased in fracture resistant compound for vibration resistance * Dupont Rynite housing with isolated tower and brass primary terminals * Supplied with mounting hardware and rubber shock mounts * Built-in current sensing (when used in conjunction with MSD Pro 600 single channel)
( 1 )
$357.95
—
$390.95
Holley Sniper EFI Canister Style Ignition Coils
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$64.65
MSD Smart Coils
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$130.95
—
$134.95
ACDelco Ignition Coils
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 35 )
$33.99
—
$84.99
MSD 6EFI Ignition Coils
MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.
( 2 )
$67.55
PerTronix Flame-Thrower Ignition Coils
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 529 )
$52.93
—
$125.53
ACDelco GM Genuine Parts Ignition Coils
ACDelco GM Genuine Parts ignition coils are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. They increase electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery's charge, and provides power to the electrical accessories while the engine is running. GM Genuine Parts ignition coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
( 11 )
$71.99
Meziere Coil Mounting Brackets
Meziere coil mounting brackets feature a fully CNC-machined billet aluminum body with a black anodized finish for durability. Each bracket is packaged with the necessary mounting spacers for the specific coil—and they even include stainless steel hardware. A clean fit and finish is the goal. Meziere will help you to get there with their high-quality engine accessories. Order the mounting bracket suited to fit your specific ignition coil application.
( 1 )
$40.39
Clearance
Summit Racing™ High-Output Ignition Coils
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 379 )
$29.99
—
$55.99
Summit Racing™ LS Ignition Coil Wiring Harness Extensions
Summit Racing™ LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Order the harness length needed for your application.
( 1 )
$26.99
—
$71.99
Standard Motor Ignition Coils
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 83 )
$19.97
—
$199.99
ACDelco Gold Ignition Coils
ACDelco Gold ignition coils are high-quality replacements for many vehicles on the road today. They increase electrical system voltage to help ignite the air/fuel mixture, as the starting and charging system starts the engine. The coils also maintain the battery's charge and provide power to the electrical accessories while the engine is running. With ACDelco Gold ignition coils, you can rest assured that your vehicle is receiving premium parts engineered for long-lasting performance, durability, and dependability. Order the model recommended for your application.
( 2 )
$51.99
PerTronix Flame-Thrower Ignition System Bundles
PerTronix Flame-Thrower ignition system bundles offer improved performance with more horsepower and better throttle response. Plus, they include everything you need in one box at a great price. Each of these bundles includes: a Flame-Thrower billet plug-and-play distributor with Ignitor II or Ignitor III module technology; a matching low-resistance Flame-Thrower chrome coil; and a set of Flame-Thrower 8mm MAGx2 universal wires (featuring silicone jackets) to resist high temperatures. PerTronix Flame-Thrower ignition system bundles typically offer a choice of red or black cap, and they're available for the most popular Chevrolet and Ford engines, as well as Chevy marine engines.
( 6 )
$500.67
—
$594.61
