Engine Ignition Parts | Summit Racing

Edelbrock LS Pro-Flo 4 EFI Harnesses

Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.

5.0 out of 5 stars ( 3 )

$90.95

—

$117.95

Dynatek Dyna 2KI Programmable Ignitions

Dyna 2Ki Programmable Ignitions not only add to, but extend, many features of the Dyna 2000 modules with a completely new design that fits under the cam cover. Every time power to the ignition is switched on, the 2Ki checks to see if the coil is shorted, mis-wired, or of the wrong type. If an error is detected, the 2Ki will immediately switch off and issue a warning. After starting, the 2Ki continuously monitors the status of the coil and wiring. All 2Ki ignitions are PC programmable: * 8-point fully-definable wide-open throttle curve * 8-point fully-definable part-throttle curve * Rev limit programmable in 50 rpm steps * Programmable dead cranking revs 0-10 * Programmable rear cylinder offset, total of +/- 10 degrees Data recording functions: * Total engine hours * Time at wide-open throttle * Number of engine starts * Longest time operating at wide-open throttle * Maximum rpm * Seconds near rev limit * Statistical analysis of time at rpm Additional features and benefits include: * Single-fire operation down to zero rpm for easier cranking and kicking * Operates in all combinations of single-fire or dual-fire with single plug or dual plug heads (when used with appropriate coils) * Eight advance curves to cover a broad range of engine builds and riding styles * Over-rev protection adjustable from 6000 to 7500 rpm * Adjustable timing retard for nitrous and turbo applications * VOES indicator; shows the status of the VOES switch, also indicates when retard mode is active * Built-in tach driver delivers stable tach signal even during rev limiting; can be used to activate shift lights, auto shifters, and other accessories * Easy static timing with built-in timing indicator (no timing light required) * Intelligent over-current and short circuit protection * Active dwell control continually adjusts coil current to maintain maximum spark energy up to redline while eliminating coil stress caused by overcharging at idle * High-efficiency design reduces battery draw for easier cold weather starting and lower charging system load * Ruggedized output--cannot be damaged by broken or disconnected spark plug wires * Over-voltage protected against momentary spikes (positive and negative) as well as surges caused by faulty voltage regulators or quick-charge battery boosters * Harness constructed with TXL cross-linked polyethylene automotive wire for exceptional resistance to abrasion, heat, and chemical attack * High-temp glass-braid jacket further increases the toughness of the harness and provides a tight, clean appearance * Wire colors closely match the factory harness for error-free installation * Manufactured with premium-quality components designed for operation in a high-temperature, high-vibration environment * One-piece aluminum housing and thermally-conductive epoxy encapsulation provide superior heat dissipation and outstanding shock, vibration, and moisture resistance * Advanced microprocessor technology * Quartz crystal accuracy.

Not Yet Reviewed

$461.99

Clearance

Astemo Ignition Coils

Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. Astemo ignition coils provide the performance needed to help keep vehicles running the way that they were designed. The Astemo ignition coils feature a durable construction to ensure maximum reliability and a longer service life, and when combined with the correct spark plugs, they provide consistent voltage and amperage output, thus ensuring efficient combustion, as well as smooth power delivery. Choose the Astemo ignition coil model designed for your application needs.

4.9 out of 5 stars ( 10 )

$50.99

$39.50

—

$70.99

Holstein Parts Ignition Coils

Misfires, check engine lights, hard starts, stalling … maybe it's time to pay some attention to your vehicle engine coils. Holstein Parts ignition coils are made with the highest quality materials and manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts offers superior coverage for domestic and import applications. Choose the ignition coil designed to service your vehicle and restore optimal operation.

Not Yet Reviewed

$27.99

—

$128.99

Beck/Arnley Ignition Coils

Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.

3.67 out of 5 stars ( 9 )

$71.99

—

$123.99

Hella Ignition Coils

Ignition coils are a central component of the ignition system. They transmit a high voltage to the spark plugs where a spark is produced that ignites the mixture. Hella ignition coils are available in more than 300 styles to cover a wide range of vehicle applications. With their manufacturing process, materials used, number of winding strands, and high-temperature resistance, Hella coils guarantee ignition even under extreme conditions and electromagnetic compatibility with the magnetic field-sensitive elements of vehicle electronics (ECE R10). Whether an ignition coil strip, candle shaft ignition coil, block ignition coil, or an ignition coil for installation with ignition distributor, Hella premium ignition coils will provide the energy to spark increased performance for your vehicle.

Not Yet Reviewed

$77.99

Clearance

Standard Motor Ignition Coils

Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.

4.43 out of 5 stars ( 83 )

$74.99

—

$138.99

Drag Race Solutions Ignition Coil Mounting Brackets

Drag Race Solutions ignition coil mounting brackets feature CNC billet aluminum construction available with a satin black powdercoat or triple chrome plate finish. They come with stainless steel mounting bolts and aluminum spacers to mount brackets directly to a Big Block Chevy cylinder head. Drag Race Solutions ignition coil mounting brackets fit MSD Pro Power, HVC, and HVC II coils.

Not Yet Reviewed

$99.99

—

$119.99