Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Ignition Parts
Showing In Stock Items. Show All 34 Items.
DIYAutoTune Smart Coils
DIYAutoTune Smart Coils by AMP EFI produce CDI-level spark energy--without a CD ignition module. They're manufactured with a 19 amp IGBT ignitor built in and can be driven with a 5 V logic level output. Normally, you would use Smart Coils for distributor-less ignitions, such as a coil-per-plug application; however they can be fired sequentially or every crank revolution (wasted spark coil per plug). Smart Coil specs: * Minimum voltage output (no load, at recommended dwell): 40,000 V * Output energy: 103 mJ * Spark duration: 2.9 ms * Primary resistance: 0.5 ohms (not directly measurable) * Primary inductance: 4.8 mH (not directly measurable) * Secondary resistance: 8,500 ohms * Secondary inductance: 22.5 H * Turns ratio: 71.1 * Maximum current: 19 amps * Maximum battery voltage: 17 V * Nominal dwell: 3.0 ms * Maximum recommended duty cycle is 40 percent * Requires HEI-type plug wire ends/boots
( 4 )
$71.00
Edelbrock Max-Fire Coil On Plug Ignition Coils
Edelbrock Max-Fire Coil On Plug ignition coils are designed with higher resistance for increased energy output at higher rpm, when compared to an OEM coil. They're ideal for use with turbocharged and supercharged applications or engines that have been converted to E85 fuel. The coils are sealed with a high temperature epoxy for shock and vibration resistance—as well as excellent thermal conductivity. The spark plug spring contact is made from stainless steel, with a ferrite lug to reduce EMI/RFI noise; while the boots are molded from a high temperature silicone compound for superior heat resistance up to 550 degrees F. Order the direct bolt-on OEM coil pack recommended for your vehicle.
( 5 )
$40.95
—
$342.95
Allstar Performance High Output Coils
Amp up the spark in your race car with these Allstar Performance high output coils. These ignition coils are designed to from the ground up to give you more spark and better reliability, even under racing conditions. Their sturdy housing is epoxy-filled to help protect against vibration, while their extruded aluminum bracket makes mounting easy. These Allstar Performance high output coils come ready to go with all of the mounting hardware, anti-vibration mounting pads, ring terminals, and a high-temperature silicone boot, so you can get your ride up and running and back on the track.
( 1 )
$52.99
On Sale
MSD Pro-Billet Ignition Bundles
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 3 )
$716.95
—
$767.95
$644.95
—
$690.95
On Sale
MSD Blaster HVC Ignition Coils
MSD Blaster HVC ignition coils are designed for high-rpm, long-duration applications, such as road course and Circle Track racing using the MSD 6 Series ignition. These units feature a 100:1 turns ratio, as well as lower primary resistance to produce high-voltage output. Windings are encased in a durable epoxy and secured with extruded brackets. They also feature a spark plug style terminal and a threaded brass primary stud. These ignition coils are CARB EO-approved and are supplied with rubber shock mounts to help them resist coil vibration. Equip your performance vehicle with MSD Blaster HVC ignition coils and feel the power!
( 34 )
$211.95
$190.75
On Sale
MSD Blaster GM Coils
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 88 )
$338.95
$72.08
—
$305.05
On Sale
MSD Blaster TFI Coils
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$80.09
$72.08
On Sale
ACCEL SuperStock Ignition Coils
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 94 )
$45.98
—
$81.05
$35.35
—
$72.95
On Sale
MSD HVC-3 Coils
MSD HVC III coils utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 material, which has incredible dielectric capabilities at high temperatures. MSD also incorporated a cutting-edge winding material that has improved insulation and is also capable of enduring extreme voltages. Together, these materials create a durable coil with incredible voltage capabilities, lightning-quick rise time, and longer spark duration. The MSD HVC-3 coils are equipped with an industry-first third terminal to allow secondary current sensing, for each spark, when used in conjunction with the MSD 8001 Pro 600 Single Channel ignition. Product details: * Designed for racing applications with an MSD 7 or 8 Series ignition control or Pro 600 single channel * New U-Core winding design produces more voltage and current * 70:1 turns ratio and lower primary resistant compound for vibration resistance * Windings are encased in fracture resistant compound for vibration resistance * Dupont Rynite housing with isolated tower and brass primary terminals * Supplied with mounting hardware and rubber shock mounts * Built-in current sensing (when used in conjunction with MSD Pro 600 single channel)
( 1 )
$390.95
$351.85
—
$357.95
On Sale
Holley Sniper EFI Canister Style Ignition Coils
New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output
( 6 )
$64.65
$58.19
FAST HI-6R CD Ignitions
Designed for engines with up to 14.5:1 compression ratios, nitrous, superchargers, or turbos, FAST's HI-6R ignitions keep your ride performing all the way down the track. These fully digital, multi-spark, CD ignitions deliver higher spark-gap current than comparable digital CD ignitions. Designed for street and racing use, they come with FAST's "Plug-n-Go" universal harness to cover most installations, with optional harnesses available separately. Their built-in rev limiter automatically drops cylinders in firing order to prevent fuel loading, and is adjustable by increments of 100 from 600-9,900 rpm, without the need for chips. Other built-in features include a tach accuracy check, a system problems check for easy problem diagnosis, and crossfire protection for supercharged and turbo applications. The optional 0-20 degree adjustable timing retard and MAP sensor make a great combination for nitrous and turbo applications. They feature fully potted construction with soft urethane for heat, dirt, and moisture protection, and an anodized heat-sink shell for reliability. FAST designed them to be points, mag, or module-triggered for 4, 6, and 8-cylinder engines with distributors.
( 4 )
$320.95
Davis Unified Ignition Dodge Tri-Power Distributors
Performance Distributors Dodge Tri-Power ignition systems offer high performance for small block, big block, and Slant-Six Chrysler engines that cannot fit D.U.I. distributors. The first part of this triple threat is the Dyna-Modules. They mount externally to the distributor housing and have more electronic dwell than stock—longer coil saturation, hotter spark. Secondly, the Inferno coil, also mounted externally, allows you to open up your plug gaps for extra fire to burn fuel more completely and provide more power. The combination of high-voltage coil and high-dwell module will impress you with quicker starting, smoother idle, and better performance—up to 7,500 rpm! The final part is calibration. Tri-Power distributors are tuned based on cam duration and lift, compression ratio, fuel octane, and vehicle weight of each of the specific applications available. A super-smooth advance curve eliminates engine-damaging detonation, provides instant throttle response, and produces maximum power throughout your entire rpm range. Choose a winner that has it all. Feel the difference with Dodge Tri-Power ignition systems from Performance Distributors. Select the model for your application needs.
( 3 )
$399.00
On Sale
MSD Powersports Ignition Coils
When you want to unleash more performance MSD powersports ignition coils deliver! They are specially designed to offer a with a higher turns ratio that is matched to the MSD's CD output. This high voltage spark is capable of full output through high racing rpm. Depending on your application, you will have two, three, or four of these coils. From idle to top end, MSD powersports ignition coils help enhance the performance of your machine. Features include: * Output voltage--30KV * Internal windings encased in epoxy * Universal applications * Supplied with grounding wire * Used on Multi-Channel Ignitions
( 2 )
$188.95
$170.05
BluePrint Engines 65K Volt Ignition Coils
BluePrint Engines 65,000 V ignition coils are excellent performance upgrades for GM-style, large Cap, HEI distributors. These HEI in-cap (internal) styles feature epoxy construction. Specs: * Primary resistance: 0.500 ohms * Secondary resistance: 8,500 ohms * Maximum voltage: 65,000 V * Spark duration: 1,500 microseconds * Peak current: 8,000 mA * Turns ratio: 75:1 * Inductance: 4.4 mH
Not Yet Reviewed
$49.99
On Sale
AEM Electronics Smart Pencil Ignition Coils
Engineered to outperform, AEM Electronics Smart Pencil ignition coils are designed to help you unlock more power and efficiency from your ignition system. Manufactured using advanced bobbin technology, specialized silicone magnetic steel cores, and precision-wrapped windings, AEM Smart Pencil ignition coils ensure optimal resistance and accurate turn ratios, delivering consistent, high-energy spark while enhancing thermal stability and mechanical strength for reliable performance under demanding conditions. They deliver up to 10 percent more spark energy in a compact OEM-style package, providing a true drop-in performance upgrade--no modifications required. Experience enhanced ignition performance with the convenience of a direct-fit solution. Select the coils designed for your vehicle.
Not Yet Reviewed
$46.07
$41.46
MSD Coil Current Boosters
MSD coil current boosters provide added power to your Ford coil-on-plug engine to support additional horsepower. They also provide a 2-step rev limiter to consistently launch your car off the line. The MSD boosters increase the peak current at the ignition coil and spark energy at the plug gap, making them ideal to support engines with increased cylinder pressure from bumped-up compression ratios, a shot of nitrous, or boosted applications. The 2-step rpm adjustments are made via two rotary switches adjustable from 1,000 to 10,900 rpm, in 100 and 1,000 rpm increments. Just plug them in to the factory wiring and hook up the activation wires as needed and you're set. MSD coil current boosters feature: * Increased current at the ignition coil * Increased spark energy at the spark plug * Built-in 2-step rev limiter for consistent launches and quick 60 ft. times * Quick, easy solution to increase ignition power on Ford modular engines * Factory-style wiring connectors plug directly into stock coils and harness
Not Yet Reviewed
$649.95
Sierra Marine Flame-Thrower Ignition Coils
Sierra Marine Flame-Thrower ignition coils upgrade stock coils to something with more wallop! They are 1.5 ohm, with oil-filled canisters, which keep their low-resistance windings secure and cool for reliable long-term performance. Features: * Low resistance and improved turn ratios * Produces the higher voltage needed to run larger spark plug gaps * Added power and better fuel economy * More windings maximize energy and reliability over the full rpm range * Fits existing brackets for easy installation
Not Yet Reviewed
$73.99
On Sale
MSD Midget Coil Packs
These MSD coil packs are designed to be used with MSD midget ignitions. The 83:1 turns ratio and lower primary resistance produce high voltage output, and secondary towers are designed for snap-on spark plug terminals.
Not Yet Reviewed
$216.95
$195.25
FiTech Go-Spark HEI Distributors
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
Astemo Ignition Control Modules
The most important part of the ignition system, Astemo ignition control modules meet all OE specifications regarding to voltage output, response times, and compactness. Utilizing proper turns ratio, low-resistance copper wiring, and temperature-resistant epoxy, Astemo igniters efficiently convert the 12 V power coming from your vehicle's battery to 20 kV or more, depending on the application. Being able to amplify the power in a quick and efficient manner allows the engine to operate more effectively, reducing emissions, increasing fuel economy, and increasing power. Choose the ignition igniter designed for your vehicle.
Not Yet Reviewed
$65.99
On Sale
MSD HEI Coils
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$125.95
$113.35
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 806 )
$299.95
$25.09
—
$200.65
On Sale
MSD Blaster OEM Replacement Coils
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 629 )
$732.95
$72.50
—
$644.95
On Sale
ACCEL GM HEI In-Cap Super Coils
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 43 )
$100.95
$77.45
—
$126.95
