Engine Ignition Parts | Summit Racing

MSD Power Grid 7 Ignition Boxes

MSD offers these Power Grid 7 ignition boxes as part of the Power Grid 7 ignition system. These ignition boxes pack higher output than other current programmable units. When used with the Power Grid 7 system controller, these USB-compatible boxes offer advanced programming for ultimate control over your rpm and timing. They provide five retard stages for nitrous and four steps of rpm limits for burnouts, spool, launch, and overrev. MSD Power Grid 7 ignition boxes' output switch can be set on rpm, pressure, or time. Power Grid 7 ignition boxes have shift light settings for each gear, and the ignition data acquisition accepts multiple runs.

4.64 out of 5 stars ( 11 )

$735.95

MSD Power Grid System Controllers

MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card

4.1 out of 5 stars ( 10 )

$377.95

—

$1,449.95

MSD Pro 600 CDI Ignition and High-Output Coil Kits

When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,561.95

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.38 out of 5 stars ( 8 )

$478.95

MSD 6-BTM CD Ignitions

MSD 6-BTM CD ignitions are ideal for engines with a turbo or supercharger. Not only will they benefit from full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation. The dash-mounted control knob lets you easily adjust the amount of timing retard from 0-3 degrees per pound of boost pressure. Dial away engine-damaging detonation by retarding the timing in relation to boost pressure, and run on the threshold of detonation for maximum power and efficiency. You also get overrev protection from the soft touch rev control. They work with 4, 6 (even fire only), and 8-cylinder engines using a distributor. They include rubber shock mounts and 3,000, 6,000, 7,000, and 8,000 rpm plug-in rev limit modules.

4.24 out of 5 stars ( 25 )

$767.95

FuelTech IGN1A Inductive Smart Coils

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.

5.0 out of 5 stars ( 2 )

$89.00

MSD Pro-Billet Crank Trigger Distributors

MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.

4.15 out of 5 stars ( 20 )

$409.95

—

$539.95

JMS Chip PowerMAX FuelMAX V2 Fuel Pump Voltage Boosters

JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses

3.75 out of 5 stars ( 4 )

$499.75

—

$599.75

MSD Pro 600 CDI Ignition Boxes

MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$1,229.95

—

$2,049.95

LS Classic Series Distributor and Plug Wire Sets

LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.

Not Yet Reviewed

$724.95

—

$922.95

MSD Programmable Digital-7 Plus CD Ignitions

MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.

3.33 out of 5 stars ( 3 )

$1,126.95

Jesel Extreme Series Distributor Drive Kits

Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.

5.0 out of 5 stars ( 2 )

$890.00

—

$910.00

On Sale

MSD Pro 600 CDI Ignition High-Output Coils

MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection

Not Yet Reviewed

$790.95

$78.46

—

$921.95

MSD DIS-4 Plus Digital Ignitions

MSD DIS-4 Plus digital ignitions improve the output of your late model distributorless ignition system (DIS). The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top-end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 Plus ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.

1.0 out of 5 stars ( 1 )

$972.95

MSD DIS Series Ignition Control Boxes

MSD's DIS Series ignition control boxes are designed to easily convert an early style engine from a conventional distributor and single coil setup to eight individual coils. One coil per cylinder means no moving parts in a distributor to control the timing and no cap and rotor to wear-out. Timing is digitally controlled ensuring precision accuracy at all rpms and every firing. The DIS has advanced timing and rev-limiter functions for racers such as individual cylinder timing: timing retards for boosted and nitrous applications, a two-step rev-limiter, and launch control to get your car out of the hole and even data acquisition to help keep everything in check. Additional features and benefits: * Fully programmable 2D and 3D Timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Easily converts to a coil-per-plug ignition system * Preprogrammed timing maps * Built-in 2.5 bar Manifold Absolute Pressure (MAP) sensor for boosted applications * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable Max Rev and launch rpm limiters provide engine protection * Consistent Holeshot, thanks to Programmable Launch Timing Retard * Single timing step retard ideal for pulling timing for nitrous applications * Data acquisition allows you to keep an eye on all aspects of the ignition * Optional temperature sensor input to control timing based on temperature * Complete kits with all required components available

Not Yet Reviewed

$634.95

MSD DIS-4 Plus HO Digital Ignitions

DIS-4 Plus HO digital ignitions are higher-output versions of the DIS ignition controls from MSD. They're designed for full race engines running high boost pressures from turbos, blowers, or nitrous. Their increased output will light up fuel mixtures even under these extreme cylinder pressures. Your late model distributorless ignition system will never be the same! The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 HO Plus digital ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.

5.0 out of 5 stars ( 1 )

$1,229.95

MSD Coil Current Boosters

MSD coil current boosters provide added power to your Ford coil-on-plug engine to support additional horsepower. They also provide a 2-step rev limiter to consistently launch your car off the line. The MSD boosters increase the peak current at the ignition coil and spark energy at the plug gap, making them ideal to support engines with increased cylinder pressure from bumped-up compression ratios, a shot of nitrous, or boosted applications. The 2-step rpm adjustments are made via two rotary switches adjustable from 1,000 to 10,900 rpm, in 100 and 1,000 rpm increments. Just plug them in to the factory wiring and hook up the activation wires as needed and you're set. MSD coil current boosters feature: * Increased current at the ignition coil * Increased spark energy at the spark plug * Built-in 2-step rev limiter for consistent launches and quick 60 ft. times * Quick, easy solution to increase ignition power on Ford modular engines * Factory-style wiring connectors plug directly into stock coils and harness

Not Yet Reviewed

$649.95

Aeromotive VaporWorx SmartRamp Voltage Booster Controllers

Voltage boosting a fuel pump can result in a dramatic increase in pump performance, but supplying more voltage than needed may be hard on pumps, controllers, electrical systems, etc. Aeromotive VaporWorx SmartRamp voltage booster controllers change the output voltage of the JMS FuelMax voltage booster automatically based on the output duty cycle of the OEM FSCM or VaporWorx PWM controller, and the controllers only increase voltage to the pump(s) when needed to meet the commanded fuel pressure—a true on-demand basis system. Ramp up the power intelligently with an Aeromotive VaporWorx SmartRamp voltage booster controller.

Not Yet Reviewed

$65.75

FAST XR-1A High-Output Ignition Coil Harnesses

XR-1A high-output ignition coils from FAST are great for Ford racers, as the factory option is not ideal for engines with high cylinder pressures. However, these aftermarket coils can be difficult to wire thanks to the complexities of the Ford engine. FAST's XR-1A high-output ignition coil harnesses are pre-made to simplify the XR-1A coils on a Ford Mod or Coyote engine that utilizes FAST XIM ignition control module. The harnesses feature a pair of heavy-duty 30 amp relays and fuses, along with heavy-gauge power and ground lead wire to support the high-current demand of XR-1A coils. They are also designed with extra length to accommodate coils that are mounted on or near the cylinder heads or remote-mounted off the engine.

Not Yet Reviewed

$287.95

JMS Chip PowerMAX SparkMAX Ignition System Voltage Boosters

Improve your times on the quarter-mile with JMS Chip PowerMAX SparkMAX ignition system voltage boosters. Utilizing a traditional or coil-on-plug ignition system, they'll give you increased spark and the highest continuous voltage and amperage output without noise. The kits are shipped complete with everything you need for installation and are designed to be activated at wide-open throttle. Kits include: * PowerMAX device * Heavy-duty, OEM-grade wiring harness * User-adjustable Hobbs pressure switch * 1/8 in. NPT adapter fitting * Wiring terminals * Wire splices and heat shrink * Solder, vacuum line, and tees * Mounting hardware * 40 amp fuses

2.0 out of 5 stars ( 2 )

$419.75

—

$498.75

Jesel Extreme Series Distributor Drive Kits with ICT

Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.

5.0 out of 5 stars ( 1 )

$1,140.00

Delphi Distributor Ignition Pickups

Delphi Distributor Ignition Pickups are OE quality parts from a top original equipment and aftermarket manufacturer. Made from high-quality materials for ultimate durability, they use winding process techniques to control the length of wire between adjacent windings. That's important because more length results in greater voltage differences, which in turn create more pressure that could break down the insulation and wire coating.

5.0 out of 5 stars ( 1 )

$13.99

COMP Cams Bronze Distributor Gears

Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.

3.97 out of 5 stars ( 39 )

$74.95

—

$117.95

Howards Cams Distributor Gears

Howards Cams distributor gears are available in a variety of materials, styles, and diameters—machined to exacting tolerances. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps. Order the model recommended for your year/make and engine application.

4.64 out of 5 stars ( 11 )

$47.99

—

$147.99