Engine Ignition Parts | Summit Racing

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.56 out of 5 stars ( 9 )

$478.95

MSD Direct Ignition Systems

The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition

4.0 out of 5 stars ( 5 )

$649.95

—

$2,049.95

MSD DIS Series Ignition Control Boxes

MSD's DIS Series ignition control boxes are designed to easily convert an early style engine from a conventional distributor and single coil setup to eight individual coils. One coil per cylinder means no moving parts in a distributor to control the timing and no cap and rotor to wear-out. Timing is digitally controlled ensuring precision accuracy at all rpms and every firing. The DIS has advanced timing and rev-limiter functions for racers such as individual cylinder timing: timing retards for boosted and nitrous applications, a two-step rev-limiter, and launch control to get your car out of the hole and even data acquisition to help keep everything in check. Additional features and benefits: * Fully programmable 2D and 3D Timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Easily converts to a coil-per-plug ignition system * Preprogrammed timing maps * Built-in 2.5 bar Manifold Absolute Pressure (MAP) sensor for boosted applications * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable Max Rev and launch rpm limiters provide engine protection * Consistent Holeshot, thanks to Programmable Launch Timing Retard * Single timing step retard ideal for pulling timing for nitrous applications * Data acquisition allows you to keep an eye on all aspects of the ignition * Optional temperature sensor input to control timing based on temperature * Complete kits with all required components available

Not Yet Reviewed

$634.95

Painless Performance Connector Cables for TBI and TPI Coils

These connector cables from Painless Performance are designed for use with TBI and TPI coils. Connector cables are available to connect the external coil to the distributor, and to connect the power and tachometer to the coil.

4.83 out of 5 stars ( 12 )

$38.99

—

$46.99

On Sale

Moroso ProCoil H.O. Ignition Coils

Moroso ProCoil H.O. ignition coils are direct-fit replacements for the OE coils on a wide variety of Ford products. They have durable alkyd cases that resist carbon tracking, and OE-style terminals for easy, plug-in wiring installation. However, the key differences are on the inside. The core and winding materials are carefully selected and integrated to produce a hotter spark, for better all-around performance, and double-layer insulation wraps around it all to protect against "arc-through."

4.75 out of 5 stars ( 4 )

$81.99

$73.79