Engine Ignition Parts | Summit Racing

MSD Two Step Module Selectors

These MSD 2-step module selectors let you choose from two different rpm limits that can be activated at different times. For example, you can use a lower-rpm module for staging and then automatically switch to a higher-rpm module after you release your trans-brake or line lock. They require the use of plug-in modules, which are available separately.

4.92 out of 5 stars ( 24 )

$149.95

JMS Chip PowerMAX FuelMAX V2 Fuel Pump Voltage Boosters

JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses

3.8 out of 5 stars ( 5 )

$499.75

—

$599.99

MSD Three-Step Module Selectors

MSD 3-step module selectors are designed for great versatility. They feature three built-in rev limiters--one for burnout, one for starting line launch, and one for high end. These selectors use the MSD plug-in rpm modules.

5.0 out of 5 stars ( 10 )

$199.95

Standard Motor T-Series Distributor Caps

Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor caps use glass-filled polyester resin or high-grade polyester and aluminum inserts to match OE performance. Available in a wide range of applications, choose the value and quality of Standard's T-Series distributor caps to service your vehicle.

4.0 out of 5 stars ( 7 )

$8.99

—

$16.99

Standard Motor T-Series Distributor Rotors

Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor rotors are made of durable phenolic plastic or high-grade polyester with a stainless steel spring and designed for dependable service. When it's time for a tuneup choose the value and quality of Standard's T-Series components to service your vehicle.

5.0 out of 5 stars ( 2 )

$2.99

—

$4.99

Holley Sniper EFI HyperSpark 2 CD Ignition Boxes

Direct upgrade for existing HyperSpark ignition box, Holley Sniper EFI HyperSpark 2 CD ignition boxes feature a smaller form factor and hotter spark. These low-profile boxes can fit nearly anywhere inside of your engine bay or cockpit. They have all the proven features of their predecessor in a smaller package, making it easier to mount, providing the cleanest installation possible. HyperSpark 2 ignition boxes pack up to 150 mJ of spark energy when used with the matching ignition coil, resulting in enough energy to safely fire your Sniper EFI engine combination. Features: * Plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses * Includes an ignition harness for fresh Sniper EFI Installs simply wanting to add timing control * New processor and board design provide a highly efficient ignition, minimal heat, and maximum spark energy with less current draw * High rpm operation and maximum output using the HyperSpark ignition coil * Powerful capacitive discharge of multiple sparks improves performance and ensures complete combustion * Consistently high-spark energy of 135 to 150 mJ for every firing, from idle to redline rpm * Operates on most 7 to 28 V electrical systems * Fully protected against an open coil, shorted coil, and open load * 1.47 lbs. lighter than an original HyperSpark ignition box * Quickens throttle response and improves starting * Tach Output to drive an external tachometer

4.6 out of 5 stars ( 5 )

$415.95

Standard Motor T-Series Ignition Breaker Points

Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series ignition breaker points control the flow of current. They are designed to meet the original design specifications, delivering quality and reliability with every installation. Is it time for a tuneup? Choose the value and quality of Standard's T-Series contact points to service your vehicle.

3.0 out of 5 stars ( 2 )

$7.99

—

$9.99

MSD Pro-Billet Distributors

MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

4.74 out of 5 stars ( 417 )

$399.95

—

$899.95

Standard Motor T-Series Distributor Pickups

Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor pickups are manufactured with OE-grade windings and permanent magnets to ensure strong signal emission and performance. These assemblies offer durability and reliability in your vehicle. Choose the value and quality of Standard's T-Series to service your vehicle.

1.0 out of 5 stars ( 2 )

$23.99

—

$29.99

Summit Racing™ Magnetic Pickups

Summit Racing™ magnetic pickups replace defective and/or damaged pickups in Summit Racing™ billet distributors. These magnetic pickups will ensure that your ignition system stays in line and keeps you rolling, whether you're on the street or at the track.

2.75 out of 5 stars ( 4 )

$32.99

MSD Street Fire HEI Distributors

Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.

4.57 out of 5 stars ( 304 )

$229.95

JMS Chip PowerMAX SparkMAX Ignition System Voltage Boosters

Improve your times on the quarter-mile with JMS Chip PowerMAX SparkMAX ignition system voltage boosters. Utilizing a traditional or coil-on-plug ignition system, they'll give you increased spark and the highest continuous voltage and amperage output without noise. The kits are shipped complete with everything you need for installation and are designed to be activated at wide-open throttle. Kits include: * PowerMAX device * Heavy-duty, OEM-grade wiring harness * User-adjustable Hobbs pressure switch * 1/8 in. NPT adapter fitting * Wiring terminals * Wire splices and heat shrink * Solder, vacuum line, and tees * Mounting hardware * 40 amp fuses

2.0 out of 5 stars ( 2 )

$419.75

—

$498.75

On Sale

PerTronix Flame-Thrower Stock Look Cast Distributors

Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts

4.19 out of 5 stars ( 272 )

$171.29

—

$412.34

$154.16

—

$371.11

On Sale

Compu-Fire Trigger Rotors

Compu-Fire trigger rotors are top-of-the-line trigger rotors designed for high performance applications. They are constricted from high-quality materials to ensure a perfect fit and finish and are designed to endure the rigors of high-rpm racing applications. Compu-Fire trigger rotors are available for a multitude of vehicle applications.

Not Yet Reviewed

$29.08

—

$29.99

$26.17

—

$26.99

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.36 out of 5 stars ( 11 )

$479.95

MSD Ultra 6AL Ignition Boxes

The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black

4.27 out of 5 stars ( 15 )

$362.95

MSD Ultra 6A Ignition Boxes

MSD Ultra 6A Series ignition boxes continue to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits—while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). The Ultra 6A Series features a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss. Product features: * Plug-and-play upgrade to current installations with a 6201, MSD 6A * New processor and board design provide a highly efficient ignition, minimal heat and max spark energy with less current draw * 60 percent smaller and 50 percent lighter than the MSD Digital 6A (688 grams vs 344 grams) * High-RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance, and ensure complete combustion * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline rpm * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 V electrical systems * Connects to points and magnetic pickups * Fully protected against an open coil, shorted coil and open load * Compact design; full MSD power * Quickens throttle response and improves starting * Tach output to drive an external tachometer

4.9 out of 5 stars ( 10 )

$338.95

MSD Digital 2-Step Rev Controllers

These MSD 2-step rev controllers coupled with MSD's digital 6AL ignition box let you choose from two different rpm limits that can be activated at different times. For example, you can use a lower-rpm setting for staging and then automatically switch to a higher-rpm setting after you release your trans-brake or line lock. The 2-Step is also digitally controlled and connects to the Digital 6AL's gray tach output wire. There are two easy to read rotary dials that let you set the launch rpm in 100 rpm increments from 2,000-11,800 rpm. There is an activation wire that connects to the transbrake, a clutch switch or to the line-lock to activate the low rpm limit. When that switch is released, the low rpm limit is turned off and the car launches hard!

4.64 out of 5 stars ( 28 )

$124.95

Lingenfelter Performance Engineering Timing Retard Launch Controllers

Lingenfelter timing retard launch controllers can be used to provide consistent launch rpm off of the line in drag racing and other standing start racing applications. In turbocharged applications, they can help build additional boost off of the line. The controllers can also be used as an adjustable individual cylinder rpm limiter, providing reliable and fast-acting, spark-based engine rpm limit control.

5.0 out of 5 stars ( 28 )

$371.99

—

$586.63

Holley Sniper EFI Canister Style Ignition Coils

New for the Holley Sniper EFI product line is a factory replacement Sniper EFI canister-style ignition coil. This ignition coil is potted with a premium-grade epoxy, making it perfect for high-vibration environments—and it can be mounted in any direction, even if it's horizontal, vertical, or upside down. "No oil" means "no failure" for multiple mounting positions. The Sniper EFI canister coil is perfect for anyone wanting to upgrade their ignition system, while maintaining a factory look under the hood. Features: * Metal canister is epoxy filled to protect the internal coil windings from high-vibration applications * Improved output coil for electronic ignitions, and MSD ignitions (ballast resistor required for points) * 100:1 turns ratio and lower primary resistance produce high-voltage output

4.33 out of 5 stars ( 6 )

$67.25

On Sale

Holley Sniper HyperSpark Ready to Run Small Cap Distributors

Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation

4.0 out of 5 stars ( 4 )

$549.95

$294.95

—

$584.95

On Sale

PerTronix Digital HP Ignition Boxes

With their adjustable start retard, Digital HP boxes are ideal for street cruisers up through hard-starting, high-compression race engines. Don't let their size fool you; PerTronix Digital HP ignition boxes hold 30 percent more energy than competitors and are built for the long run. Additional Features: * Multiple spark all the way to redline * RPM activated trigger * Locking Molex connector * Tachometer output lead * Onboard diagnostics and tach calibration

4.41 out of 5 stars ( 49 )

$329.96

—

$329.99

$296.96

—

$296.99

Lingenfelter Performance Engineering 2-Step Adjustable Launch Controllers

Lingenfelter LNC-003 2-step adjustable launch controllers allow you to direct primary and secondary rpm limit settings. These dual spark-based rpm limiters will help provide consistent launch rpm, as well as the ability to load the engine to help build additional boost off the line. They can also be used as adjustable individual cylinder rpm limiters—especially useful with auxiliary fuel control systems where it's nearly impossible to make sure both the factory and auxiliary systems turn off fuel at the exact same time. Make your LSX-based engine and ignition system really perform at the drag strip with Lingenfelter LNC-003 2-step adjustable launch controllers.

4.43 out of 5 stars ( 7 )

$305.85

—

$376.99

MSD Blaster Powersports Ignition Coils

MSD Blaster Power Sports ignition coils deliver the most energy for easier starting, quicker throttle response, and powerful spark energy throughout the rpm band of your powerplant. Power Sports coils are direct bolt-on, plug-in replacements for factory units on many popular powersports machines. If you demand maximum performance for maximum fun, these easy, economical MSD upgrades are the perfect fit for your ATV, UTV, motorcycle, snowmobile, or jet ski. Benefits include: * Available in red and black * Optimized coil engineering * Easier starts * Smoother idle * Crisper throttle response * Improved power from idle to redline * Supplied with mounting bracket and hardware

4.4 out of 5 stars ( 5 )

$164.95