Engine Ignition Parts | Summit Racing

Allstar Performance HEI Ignition Modules

Allstar Performance ignition modules help improve engine performance by giving your engine a better spark. They're ideal for repairing your Allstar HEI distributor or energizing your stock ignition. Enjoy the benefits of improved throttle response, smoother idle, and full power output at high rpm with Allstar Performance ignition modules!

5.0 out of 5 stars ( 1 )

$24.99

PerTronix Flame-Thrower HEI Ignition Module Wiring Harnesses

PerTronix Flame-Thrower HEI ignition module wiring harnesses feature a premium-quality wire and capacitor to ensure good connections and static-free operation. They include pre-terminated ends that can be installed in minutes with no cutting or modification. Additional notes: * Flame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7,500 rpm. That's nearly 3,000 rpm higher than most stock HEI distributors. Race HEI distributors feature an electronic HEI distributor module and 50,000 V coil combination that optimizes spark energy and peak current to the spark plug in the 6,000 to 8,500 rpm range. * PerTronix 4-pin wire harness/capacitor for all Flame-Thrower HEI distributors and GM 8-cylinder HEI distributors (P/N PNX-D9007)

3.69 out of 5 stars ( 13 )

$33.60

Summit Racing™ High-Output 4-Pin HEI Performance Modules

Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.

4.57 out of 5 stars ( 14 )

$55.99

PerTronix Flame-Thrower HEI III 4-Pin Ignition Modules

PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.

4.3 out of 5 stars ( 47 )

$101.57

Summit Racing™ GM HEI Ignition Tune-Up Kits

These Summit Racing™ GM HEI ignition tune-up kits offer an affordable way to bring your stock GM HEI distributor back to life. They include the following components: * High-power 50,000 V HEI coil * Distributor cap and rotor * Coil dust cover * Low-saturation ignition control module * Adjustable vacuum advance unit * HEI bushing (between the coil and cap) * Wiring harness and capacitor * High performance advance spring and weight set * Mounting hardware

4.54 out of 5 stars ( 169 )

$81.99

—

$83.99

BluePrint Engines HEI Distributor 4-Pin Ignition Modules

BluePrint Engines HEI distributor ignition modules are offered as replacements for GM-style 4-pin High Energy Ignition distributors. They will efficiently control spark timing and dwell. Replace your failing module with a new one from BluePrint.

Not Yet Reviewed

$19.99

Davis Unified Ignition Dyna-Modules

Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.

4.59 out of 5 stars ( 135 )

$64.99

—

$112.50

On Sale

MSD Digital GM High Energy Modules with Rev Limiters

MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.

3.68 out of 5 stars ( 66 )

$181.95

$163.75

On Sale

MSD Street Fire Ignition Controller Modules

MSD offers budget pricing and big performance with their Street Fire ignition controller modules. Their modules improve performance with multiple spark, more spark, and ensured combustion for a cleaner burn to set the streets on fire. MSD ignition modules will show you the benefits of greater throttle response, smoother idle, and full power output at high rpm. Fire your engine for less with MSD Street Fire ignition controller modules.

4.26 out of 5 stars ( 31 )

$67.39

$60.65

Summit Racing™ Ignition Module Conversion Kits

Summit Racing™ ignition module conversion kits are used on GM vehicles equipped with 5-pin HEI ignition modules. If you feel a hesitation or stall on deceleration, install one of our Summit Racing™ ignition module conversion kits today!

Not Yet Reviewed

$7.99

On Sale

ACCEL Ignition Control Modules

ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.

2.91 out of 5 stars ( 45 )

$75.95

—

$176.95

$58.38

—

$159.25

PerTronix Flame-Thrower Ignition Modules

Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.

3.93 out of 5 stars ( 42 )

$70.00

—

$84.20

Summit Racing™ Digital GM High Energy Modules with Rev Limiters

Summit Racing™ offers GM high-energy modules with rev limiters that enable you to adjust the rpm limit from 5,000 to 9,500 rpm. They are high performance modules built for HEI distributors, producing 50 percent higher coil drive currents than the stock module. This saturates the coil faster, delivering more spark energy at top speeds. Your benefits are increased horsepower and rpm range, plus improved starting. GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory or aftermarket HEI distributors.

Not Yet Reviewed

$112.99

MSD GM HEI Module Bypass Cable

MSD module bypass cable assemblies allow you to plug an MSD 6 or 7 Series ignition or timing accessory directly into the magnetic trigger inside a GM HEI distributor.

4.5 out of 5 stars ( 12 )

$16.13

On Sale

MSD Street Fire HEI Distributors

Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.

4.55 out of 5 stars ( 291 )

$222.95

—

$255.95

$200.65

—

$230.35

On Sale

MSD Circle Track Ignition Control Modules

MSD Circle Track ignition control modules will replace your stock 4-pin with the same powerful and reliable performance. These replacements are for use with MSD HEI distributors and will spark the energy to keep you going lap after lap. Make your Circle Track car's ignition "bulletproof" with control modules from MSD.

1.0 out of 5 stars ( 1 )

$89.15

$80.24

On Sale

MSD Ultimate HEI Kits

MSD Ultimate HEI kits have everything you need to turn your early model GM HEI distributor into a great performance distributor. The MSD HEI modules feature special circuitry to produce 50 percent higher coil drive currents than stock modules, resulting in higher spark energy at racing rpm. By matching the coil specifications with the modules, MSD delivers more accurate timing and dwell control. The kits also include a high-quality rotor, a durable cap with brass terminals, and even a new dust cover.

4.89 out of 5 stars ( 19 )

$409.95

$367.95

On Sale

MSD HEI Coils

MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

4.67 out of 5 stars ( 36 )

$125.95

$113.35

PerTronix Flame-Thrower Street/Strip HEI Distributors with HEI III Modules

PerTronix Flame-Thrower Street/Strip HEI distributors with HEI III modules reduce misfires and improve engine performance. These powerful energy sparkers feature a specially designed module—the HEI III—that delivers multiple sparks and adaptive dwell that maintains peak energy through the entire RPM range. Flame-Thrower Street/Strip distributors have a factory-installed performance advance curve and an adjustable vacuum advance. They offer operation without misfire beyond 7,500 rpm—nearly 3,000 rpm higher than most stock HEI distributors. Order the model recommended for your application. Additional features: * Integrated digital rev limiter with LED feedback for precise RPM setting * Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability * Adjusts spark timing at higher RPM to compensate for the inherent electronic delay * Senses startup and increases energy for quicker, easier starting

4.67 out of 5 stars ( 6 )

$366.55

—

$383.00

Summit Racing™ Blueprinted HEI Distributors

Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.

4.44 out of 5 stars ( 1252 )

$112.99

—

$399.99

On Sale

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$665.95

—

$716.95

$598.95

—

$644.95

Moroso Ignition Control Modules

Moroso ignition control modules provide high-output consistent dwell, accurate timing, extended durability, and high spark output. Whether you're looking for OEM replacement or high performance gear, Moroso has you covered.

Not Yet Reviewed

$86.99

PerTronix Flame-Thrower HEI and TFI Ignition Coils

With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.

4.64 out of 5 stars ( 64 )

$71.22

—

$95.96

Proform GM HEI Distributor Tuneup Kits

Breathe some new life into your GM HEI distributor with one of these Proform GM HEI distributor tuneup kits. They include everything you need. Features include: * 50,000 V coil * "No-arc" rotor * Coil dust cover * Low-saturation module * Adjustable vacuum advance unit * HEI bushing * Wiring harness and capacitor * High performance advance springs and weights * All necessary mounting hardware

4.64 out of 5 stars ( 25 )

$89.99

—

$107.99