Engine Ignition Parts | Summit Racing

Edelbrock LS Pro-Flo 4 EFI Harnesses

Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.

5.0 out of 5 stars ( 3 )

$90.95

—

$117.95

Clearance

ACES Fuel Injection Full House Multi-Coil Ignition Systems

Harness the power of spark energy with ACES Fuel Injection Full House Multi-Coil Ignition Systems! Designed for coil-near-plug engine management systems, such as ACES Fuel Injection Jackpot EFI, GM LS platforms, and most other EFI systems, the Full House ignition helps make unrivaled spark energy and dependability. The Full House has built-in protection for accidental reverse battery connection, over-temperature protection, is fully waterproofed, and has LED diagnostics that can identify a problem with individual coils should one come up. A programmable power setting using the included high-resolution hand-held programmer allows users to switch between 250 to the industry-leading output of 750 millijoules via the hand-held wire or software, making the Full House ideal for street driven race cars. Turn it down for the cruise, and then set it to power mode at the track. Whether it's Pro Mod, Pro Street, or a sled dragging pull wagon, if you need to power your 8-coil ignition reliably, the ACES Fuel Injection Full House is the system for you! Additional features and specs: * 32-bit Power Architecture based MCU for automotive powertrain applications * Robust shielding for anti-interference, high stability hardware and software design * Real-time programmable ignition curve * Hand-held displays calibration data and all parameters in real time * Spark energy is adjustable by the full color, touch screen hand-held and the included ACES laptop tuning software * Eight channels ignition control with over 750 mJ spark energy * High-efficiency alternating current (AC) power delivery * Over 50 Kilovolts output voltage to drive ACES performance coil * Primary voltage over 565 V * Spark duration of greater than 300 microseconds * Operating voltage from 6-22 V * OE Spec waterproofing * Direct plug-in to Jackpot EFI systems * Compatible with most EFI systems using 5 V or 12 V drivers

Not Yet Reviewed

$1,499.99

$1,299.50

FAST Magnet-Free Crank Trigger Kits

Recently, engineers at FAST turned to the OEMs to see what they trust in the way of rpm-measuring crank triggers for their 400 and 500 horsepower daily drivers. Until now, flying magnetic trigger wheels with bulky inductive pickups have been used with the risk of broken magnets or losing magnets at high engine rpm. Now there is a better answer--FAST magnet-free crank trigger kits. A magnet-free device, these kits from FAST include a wheel constructed from ASTM A36 grade steel that is so strong that it only needs to be .125 in. thick and is virtually indestructible. With the wheel being this thin, it not only weighs less but requires less space than competitors' aluminum versions. And the FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. The key to the crank trigger's dependability and accuracy lies in the trigger wheel design. Rather than having added magnets, the wheel has tabs on the outer rim. These tabs are measured by the inductive sensor as the wheel revolves, which then provides data to the fuel injection and ignition systems for accurate rpm measurement. And because the tabs are a part of the single wheel unit, there is no possibility of loss or fragmentation as with the magnetic style trigger wheels. This sensor is used by OEMs both on and inside the engine and provides long-lasting, accurate timing. Installation is straight forward, and everything required is included. For those already using the FAST XFI system, it's a plug and play unit. In addition, it's compatible with many other EFI systems on the market.

3.0 out of 5 stars ( 2 )

$303.95

—

$324.95

Granatelli Motor Sports Ignition System Combo Kits

Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware

Not Yet Reviewed

$308.98

—

$878.75

Daytona Twin Tec TC88 Ignition Kits

Just do it. Installing Daytona Twin Tec TC88 ignition kits are one of the best things you can do to your bike. With them, you'll pull harder, start faster, won't foul the plugs, and it'll idle great, too. If you're looking for a more adaptable and tunable upgrade and timing advance modifications to accommodate stock to customized engines, their adjustability factor and easy plug-in installation are the big reasons for their use, as well as the easy to dial-in, digitally set rpm limits with a selectable multi-spark mode for quick starting and smooth cruising. Daytona Twin Tec's product focus is electronic fuel injection and ignition systems for Harley-Davidson® motorcycles. These modules support all sensors, including theft/security systems, and include the TC88 ignition, coil, and wire sets. An optional USB interface and software for programming custom advance curves are available.

Not Yet Reviewed

$484.95

—

$595.95

FAST Magnetic Crank Trigger Kits

FAST magnetic crank trigger kits are setting the new industry standard for timing accuracy while preserving compatibility with other brands' ignition systems. Crank triggers are known to provide the most accurate crankshaft rotation measurement; however, modern fuel injection systems and sophisticated testing equipment have exposed inadequacies in traditional crank trigger designs. To correct for timing fluctuations in high-rpm racing applications, FAST engineers replaced the fluctuation prone 2-wire inductive pick-up with a modern digital hall-effect design. This digital hall-effect pick-up, coupled with samarium cobalt magnets installed in the trigger wheel, result in crank rotation measurements that are accurate to a quarter of a degree from zero to 13,000 engine rpm. These pickups are far less susceptible to electromagnetic noise interference than 2-wire designs. Additionally, the pick-up accuracy is unaffected by electrical system voltage variations—maintaining quarter-degree timing accuracy from 7 V to 30 V DC. Outputting a clean square-wave signal, FAST magnetic crank trigger kits can trigger ignition boxes directly or integrate with EFI systems such as the FAST EZ-EFI 2.0, XFI Sportsman, and XFI 2.0. An integral LED eases timing calibration and diagnostics. These kits don't sacrifice durability for technological innovation. Crafted from billet aluminum then black anodized, the trigger wheels and pick-up brackets will withstand harsh racing environments. OEM-quality braided wire wrap protects the pick-up pigtail, while a weatherproof Deutsch connector terminates the harness. Order the kit recommended for your year, make, and engine application.

Not Yet Reviewed

$490.95

Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits

Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware

4.0 out of 5 stars ( 2 )

$448.99

Summit Racing™ GM HEI Ignition Tune-Up Kits

These Summit Racing™ GM HEI ignition tune-up kits offer an affordable way to bring your stock GM HEI distributor back to life. They include the following components: * High-power 50,000 V HEI coil * Distributor cap and rotor * Coil dust cover * Low-saturation ignition control module * Adjustable vacuum advance unit * HEI bushing (between the coil and cap) * Wiring harness and capacitor * High performance advance spring and weight set * Mounting hardware

4.54 out of 5 stars ( 167 )

$81.99

—

$83.99

Jesel Extreme Series Distributor Drive Kits with ICT

Jesel Extreme Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and the ability to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Extreme Series distributor drives also feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications.

5.0 out of 5 stars ( 1 )

$1,140.00

Jesel Pro Series Distributor Drive Kits with ICT

Jesel Pro Series distributor drive kits with ICT provide a simple and accurate cam sync source for engines operating with an electronic fuel injection system, and are ideal for naturally aspirated engines. The Individual Cylinder Timing (ICT) drive is setup to use a 3/8 in.-24 non-magnetic pickup (not supplied), which picks up the cam position off a rare earth magnet embedded in the external rotor. The pickup can be indexed every 60 degrees for ideal wire routing. Jesel Pro Series distributor drives also feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring.

Not Yet Reviewed

$1,090.00

On Sale

ACCEL Truck Super Tune-Up Kits

ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.

4.63 out of 5 stars ( 178 )

$119.95

MSD Coil Pack Wiring Harnesses

MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.

4.17 out of 5 stars ( 24 )

$106.95

FAST XIM Ignition Modules

FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.

Not Yet Reviewed

$824.95

—

$1,115.95

On Sale

MSD Smart Coils

MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.

5.0 out of 5 stars ( 1 )

$1,126.95

—

$1,299.95

MSD 6EFI Ignition Coils

MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.

5.0 out of 5 stars ( 2 )

$67.55

MSD 6-MOD Ford Modular Engine Controller

The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.

4.5 out of 5 stars ( 4 )

$921.95

Crown Automotive Ignition Modules

Ignition modules can eventually deteriorate and break down. Crown Automotive ignition modules will allow your car to once again ignite the fuel that allows your car to start and keep going. If you're experiencing power loss, overheating, or stalling due to failure, Crown parts are direct-fit components to discharge the spark that keeps you going.

5.0 out of 5 stars ( 2 )

$153.99

MSD Ford Coyote 2-Step Rev Limiters

If your Coyote-powered Ford was built after February 23, 2016, and you need a 2-Step rev-limiter for consistent burnouts or launches, MSD part number 87311 has you covered. When activated, the 2-Step will hold your engine at a constant RPM. This can be achieved by way of a clutch switch or push button. As soon as your activation switch or button is released, full ignition is restored and you're off to the races. The RPM is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments. A handy LED shows when the launch rev limit is active.

Not Yet Reviewed

$385.95