Availability
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 114 )
$89.95
—
$138.95
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 66 )
$177.95
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 121 )
$64.99
—
$112.50
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 13 )
$55.99
These MSD 2-step module selectors let you choose from two different rpm limits that can be activated at different times. For example, you can use a lower-rpm module for staging and then automatically switch to a higher-rpm module after you release your trans-brake or line lock. They require the use of plug-in modules, which are available separately.
( 24 )
$142.95
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 75 )
$116.24
—
$210.45
MSD rpm module selectors plug into the rpm module socket on MSD Soft Touch rev controls, ignition boxes with output for rpm, and any other accessories that use plug-in modules.
( 28 )
$119.95
—
$158.95
Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. The kits include five modules in 200 rpm increments.
( 68 )
$59.75
—
$123.95
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 46 )
$106.45
MSD offers budget pricing and big performance with their Street Fire ignition controller modules. Their modules improve performance with multiple spark, more spark, and ensured combustion for a cleaner burn to set the streets on fire. MSD ignition modules will show you the benefits of greater throttle response, smoother idle, and full power output at high rpm. Fire your engine for less with MSD Street Fire ignition controller modules.
( 28 )
$65.75
MSD 3-step module selectors are designed for great versatility. They feature three built-in rev limiters--one for burnout, one for starting line launch, and one for high end. These selectors use the MSD plug-in rpm modules.
( 10 )
$184.95
If your ignition module dies, you won't be going anywhere, and you have things to do and places to go. You can keep your distributor running smoothly with replacement ignition modules from Summit Racing™. These direct-replacement simple 3-wire hookups will have you out and about in no time. Make sure you're always ready with Summit Racing™ replacement ignition modules.
( 30 )
$35.99
—
$95.99
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 41 )
$65.95
—
$121.45
Don't take chances with an old or questionable ignition control module that can leave you stranded. Standard Motor Products replacement ignition control modules are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's ignition needs to Standard Motor Performance.
( 38 )
$27.99
—
$828.99
Ignition parts can wear out over time, so keep your PerTronix industrial distributor in top working order with these replacement modules. Made to the same high-quality standards as the originals, PerTronix replacement modules will give you plenty of trouble-free ignition service.
( 9 )
$99.95
—
$103.45
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$52.69
ACDelco GM Genuine Parts ignition control modules are GM recommended replacement components that undergo more stringent testing than aftermarket products. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. GM Genuine Parts ignition control modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints. They have been laser trimmed to provide precise values and reduce deterioration and damage. They include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. ACDelco GM Genuine Parts ignition control modules have been manufactured to provide the performance, durability and service life you would expect from General Motors.
( 5 )
$20.99
—
$394.99
MSD retard modules are designed for use with MSD timing controls with retard features. They are available in several degree ranges to custom-tailor your ignition.
( 6 )
$11.78
—
$65.89
Motorcraft ignition modules are designed to operate under a wide range of temperatures. They help to ensure that you will not be plagued with premature firing, misfiring, or shutdowns resulting from transient outside signals. They meet vehicle requirements for government fuel economy and emission standards.
( 6 )
$58.99
—
$74.99
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 10 )
$12.99
—
$268.99
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$202.45
—
$210.45
MSD retard module selectors get you dialed in for performance. Designed for use with MSD timing controls, these module selectors allow you to select between 12 retard amounts with the turn of a dial.
Not Yet Reviewed
$158.95
Proform offers these high performance ignition modules for a variety of applications.
( 16 )
$34.99
MSD launch control module selectors are designed to help drag racers achieve more consistency while staging. MSD has incorporated an adjustable low-rpm stage selector with a 3-step module selector. They allow the driver to adjust his launch rpm in 100 rpm increments from the driver's seat, based on changes in track conditions.
( 3 )
$368.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
