Engine Ignition Parts | Summit Racing

Edelbrock LS Pro-Flo 4 EFI Harnesses

Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.

5.0 out of 5 stars ( 3 )

$90.95

—

$117.95

Holley EFI Systems Main Wiring Harnesses

Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.

Not Yet Reviewed

$562.95

—

$972.95

Clearance

ACES Fuel Injection Full House Multi-Coil Ignition Systems

Harness the power of spark energy with ACES Fuel Injection Full House Multi-Coil Ignition Systems! Designed for coil-near-plug engine management systems, such as ACES Fuel Injection Jackpot EFI, GM LS platforms, and most other EFI systems, the Full House ignition helps make unrivaled spark energy and dependability. The Full House has built-in protection for accidental reverse battery connection, over-temperature protection, is fully waterproofed, and has LED diagnostics that can identify a problem with individual coils should one come up. A programmable power setting using the included high-resolution hand-held programmer allows users to switch between 250 to the industry-leading output of 750 millijoules via the hand-held wire or software, making the Full House ideal for street driven race cars. Turn it down for the cruise, and then set it to power mode at the track. Whether it's Pro Mod, Pro Street, or a sled dragging pull wagon, if you need to power your 8-coil ignition reliably, the ACES Fuel Injection Full House is the system for you! Additional features and specs: * 32-bit Power Architecture based MCU for automotive powertrain applications * Robust shielding for anti-interference, high stability hardware and software design * Real-time programmable ignition curve * Hand-held displays calibration data and all parameters in real time * Spark energy is adjustable by the full color, touch screen hand-held and the included ACES laptop tuning software * Eight channels ignition control with over 750 mJ spark energy * High-efficiency alternating current (AC) power delivery * Over 50 Kilovolts output voltage to drive ACES performance coil * Primary voltage over 565 V * Spark duration of greater than 300 microseconds * Operating voltage from 6-22 V * OE Spec waterproofing * Direct plug-in to Jackpot EFI systems * Compatible with most EFI systems using 5 V or 12 V drivers

Not Yet Reviewed

$1,499.99

$1,299.50

FiTech Go-Spark Ignition Coils

FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.

2.67 out of 5 stars ( 3 )

$45.00

—

$369.00

FiTech Go-Spark CD Ignitions

FiTech Go-Spark CD ignitions enhance the performance of fuel injected or carbureted engines. The high-output multi-spark technology ensures complete combustion and improves drivability by delivering full energy sparks from idle through high-rpm. Optimize your EFI or carb ignition setup with FiTech Go-Spark CD ignitions. Features and specs: * One sealed connector for a clean installation * Multi-spark to 2,500 rpm * Maximum 10,000 rpm

4.5 out of 5 stars ( 4 )

$222.00

FiTech Go-Spark Distributors

FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)

Not Yet Reviewed

$199.00

—

$459.00

FiTech Distributor Gears

FiTech offers distributor gears for a wide range of applications, including many Chevy small block, big block, and GM V6; and Ford small block, big block, Modified and Cleveland engines from 1955 and up. These replacements are available in materials such as bronze, iron, melonized, and steel—as well as a variety of shaft diameters. Gears can make a big impact on your engine's performance. Maintain proper timing with new distributor gears from FiTech.

Not Yet Reviewed

$39.00

—

$75.00

FiTech Coil Harnesses

FiTech coil harnesses provide a direct replacement for worn or damaged coil harnesses in FiTech fuel injection systems, specifically designed for LS-based engine configurations. This set includes two individual harnesses, ensuring a complete replacement for your ignition coil wiring needs. Key details: * Specifically designed for FiTech fuel injection systems, ensuring compatibility * Comes with two coil harnesses for comprehensive replacement * Maintains proper ignition coil connections for optimal performance * Helps prevent misfires and promotes consistent engine operation

Not Yet Reviewed

$86.00

FiTech Go-Spark Ready-To-Run Distributors

FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.

Not Yet Reviewed

$309.00

—

$409.00

FiTech Go-Spark Advance CDI Ignitions

Upgrade your ignition system to the FiTech Go-Spark Advanced CDI ignition and experience enhanced performance and control like never before. With its adjustable spark energy, precise timing control, and convenient features, this CDI unit is the perfect choice for enthusiasts and professionals seeking the ultimate ignition solution. Unleash the full potential of your engine and ignite your driving experience with the FiTech Go-Spark Advanced CDI ignitions.

Not Yet Reviewed

$394.00

FiTech Go-Spark Coil Brackets

FiTech Go Spark round mounting brackets are designed for oil-filled ignition coils that measure between 2 1/8 in. and 2 1/4 in. in diameter. They provide a secure and stable mounting solution, often used with ignition systems and fuel injection distributors. Fabricated from steel with a chrome finish, the brackets include mounting hardware (a bolt and nut). These parts meet or exceed OE quality standards.

5.0 out of 5 stars ( 1 )

$10.00

FiTech Go-Spark Advanced Ignition Box and Coil Kits

Whether you're looking for something that's safe for nitrous use or adjustable start retard, the FiTech Advanced CDI ignition box is perfect and comes with a high-energy coil to maximize your engine's potential. As part of FiTech's Go-Spark Series, this ignition box and coil combo offers utility for both the street and strip—with an adjustable spark energy output (275mJ for the street, 585mJ for the strip), customizable rev limiters, precise timing control, and an informative LED display for live rpm or battery voltage. The high-energy coil enhances CDI performance. Go-Spark Advanced CDI features: * Adjustable spark energy output: 275mJ for the street or 585mJ for the strip * Rev limiter settings for Burnout, Launch, and Max Engine Over-Rev Protection * Adjustable Start Retard for quick, easy cranking to ease the load on your starter * Single Nitrous/Step Retard input for safe Nitrous Oxide System use * Digitally controlled for precise timing controlled * LED shows live rpm or battery voltage, with buttons for adjustments * Coil produces up to 50,000 Volts * Coil can mount almost anywhere * Better reliability and performance

Not Yet Reviewed

$445.99

FiTech Go-Spark HEI Distributors

FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load

Not Yet Reviewed

$209.00

Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits

Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware

4.0 out of 5 stars ( 2 )

$448.99

FuelTech IGN1A Inductive Smart Coils

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.

5.0 out of 5 stars ( 2 )

$89.00

On Sale

MSD 6EFI Ignitions

MSD 6EFI ignitions are capacitive discharge ignitions designed to work in harmony with electronic fuel injection systems. They come with detailed wiring instructions, making installation a breeze. Increased throttle response, smoother idle, quicker starts, and full ignition power throughout the entire rpm range are all benefits of adding these ignition controls to your fuel injected engine. They feature built-in rev limiters that will protect the engine in the event of a missed shift or driveline failure. If you have a 4, 6, or 8-cylinder engine with EFI, MSD 6EFI ignition controls will connect and fire it up! MSD 6EFI ignitions feature: * Detailed instructions for installation with various EFI systems * Compact design * Adjustable rev limiter for over-rev protection with rotary dials in 100 rpm increments * Works on 12 V electrical systems using a distributor * Easily connects to magnetic pickup, electronic, and even points distributors

4.73 out of 5 stars ( 11 )

$166.99

$150.29

MSD Smart Coils

MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.

5.0 out of 5 stars ( 1 )

$130.95

—

$1,299.95

MSD Pro-Billet Dual Sync EFI Distributors

MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability

3.82 out of 5 stars ( 17 )

$499.95

—

$599.95

On Sale

MSD Pro-Billet Ready-to-Run Marine Distributors

MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.

4.13 out of 5 stars ( 16 )

$819.95

$614.95

—

$819.95

MSD Non-Current Limited Ignition Tachometer Adapters

If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.

4.0 out of 5 stars ( 17 )

$101.95

N2MB Racing WOT Boxes

N2MB Racing offers innovative electronics for your performance vehicle—including their WOT boxes. They add launch control and no-lift shifting abilities to any car, truck, motorcycle, or other fuel-injected vehicles, helping cut tenths of seconds off your quarter-mile runs. Gain the upper hand in your race circuit competitions with N2MB Racing WOT boxes!

5.0 out of 5 stars ( 2 )

$219.00

MSD 6EFI Ignition Coils

MSD 6EFI ignition coils produce high-spark energy to ensure the air and fuel in your engine get burned completely to improve starting, throttle response, and supply powerful spark throughout the RPM range. Designed to match the 6EFI ignition, the 6EFI coil has a clean black appearance with logos laser-etched on a black anodized aluminum mounting bracket, and is supplied with four, self-tapping mounting screws, plus a plug-in harness with color-coded wires to facilitate an easy installation. When running an MSD Atomic EFI or similar throttle body fuel injection system with a 6EFI ignition box, the 6EFI ignition coil is made for you! In addition, an MSD spark plug wire boot and terminal come in the kit to convert your existing coil wire from a female socket connection, to male high energy ignition (H.E.I.) connection if needed.

5.0 out of 5 stars ( 2 )

$67.55

FAST Dual-Sync Billet Distributors

These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.

4.0 out of 5 stars ( 28 )

$429.95

—

$545.95

MSD Coil Pack Wiring Harnesses

MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.

4.17 out of 5 stars ( 24 )

$106.95