Engine Ignition Parts | Summit Racing

MSD Adjustable Low RPM Modules

MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.

4.38 out of 5 stars ( 8 )

$54.05

MSD Adjustable Timing Controls

Change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.

4.17 out of 5 stars ( 18 )

$299.95

Lingenfelter Performance Engineering 2-Step Adjustable Launch Controllers

Lingenfelter LNC-003 2-step adjustable launch controllers allow you to direct primary and secondary rpm limit settings. These dual spark-based rpm limiters will help provide consistent launch rpm, as well as the ability to load the engine to help build additional boost off the line. They can also be used as adjustable individual cylinder rpm limiters—especially useful with auxiliary fuel control systems where it's nearly impossible to make sure both the factory and auxiliary systems turn off fuel at the exact same time. Make your LSX-based engine and ignition system really perform at the drag strip with Lingenfelter LNC-003 2-step adjustable launch controllers.

5.0 out of 5 stars ( 6 )

$303.99

Proform Adjustable Vacuum Advance Canisters

These Proform adjustable vacuum advance canisters allow you to fine-tune your vacuum advance for optimum performance.

4.44 out of 5 stars ( 18 )

$20.99

PerTronix Adjustable Vacuum Advance Canisters

PerTronix adjustable vacuum advance canisters allow you to optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Replacement models are available for different distributor applications, such as GM HEI-type or billet models from PerTronix.

3.75 out of 5 stars ( 24 )

$27.99

—

$35.35

MSD Adjustable Slip Collars

These MSD adjustable slip collars are designed to give you height adjustment on your distributor. They are made of steel and feature a natural finish. The collars use two Allen head set screws to adjust for tall deck engine blocks, or others that have been decked.

5.0 out of 5 stars ( 4 )

$47.25

ACCEL Points Style Adjustable Vacuum Advance Canisters

ACCEL adjustable vacuum advance canisters for GM points V8 are designed to give you instant horsepower and throttle response. They permit infinite adjustment to both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM points V8.

4.18 out of 5 stars ( 22 )

$60.75

ACCEL HEI Adjustable Vacuum Advance Canisters

ACCEL adjustable vacuum advance canisters for GM HEI are designed to give you instant horsepower and throttle response. Adjustable vacuum advance chambers permit infinite settings for both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM HEI.

3.82 out of 5 stars ( 22 )

$54.05

Summit Racing™ Blueprinted HEI Distributors

Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.

4.44 out of 5 stars ( 1260 )

$112.99

—

$399.99

MSD Ignition Control Units

MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.

4.86 out of 5 stars ( 37 )

$562.95

—

$564.95

Summit Racing™ Multi-Spark Digital Capacitive Discharge Ignitions

Summit Racing™ multi-spark digital capacitive discharge ignition boxes use cutting-edge microprocessor controls to create hot, consistent sparks for performance throughout the powerband. These capacitive discharge systems create a powerful 100 mJ spark at full voltage, with multiple sparks below 3,000 rpm to improve starting ability, idle quality, and throttle response, while preventing plug fouling due to cylinder load-up. They have a 470V primary/45,000V secondary output, plus a built-in rev limiter-just use the rotary dials to set it anywhere from 2,000 to 9,900 rpm. The lightweight cast aluminum housing has a durable metallic silver powdercoat finish, and the ignition comes with direct plug-in connectors for most 2-wire distributors (including points and magnetic pickups), installation hardware, labeled wiring, optional Weather Pack connectors, optional vibration-resistant mounts, and detailed instructions.

4.42 out of 5 stars ( 136 )

$218.99

MSD Power Grid System Controllers

MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card

4.1 out of 5 stars ( 10 )

$377.95

—

$1,449.95

Shifnoid Adjustable RPM Modules

Shifnoid Adjustable RPM modules allow you to select any rpm between 1,000 and 11,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using a starting line launch limiter burn out limiter, shift point or top end maximum RPM limiter. Designed to work with most ignition systems, the Shifnoid adjustable RPM modules allow you to dial-in just the right RPM needed.

4.5 out of 5 stars ( 10 )

$29.99

MSD Pro-Billet HEI Distributors

The MSD Pro-Billet HEI distributors pick up where the originals left off. Drawing on years of high-performance ignition experience, MSD engineers created a unique ignition module and internal coil that are capable of running above 9,000 rpm. Stock and other aftermarket modules lose spark energy at about 4,500 rpm. These modules produce 50 percent more current than stock units, and deliver a much more precise timing signal as well as more dwell control. The coil delivers over 100 millijoules of energy across the plug gap. For strength and high rpm stability, the QPQ-treated oversized shaft is guided by a sealed ball bearing on top and long sintered bushing at the bottom. The QPQ coating provides a low-friction coating on the shaft and also makes it highly resistant to corrosion. TIG welded to the top of the shaft is an adjustable mechanical advance assembly. The distributors are supplied with extra springs and stop bushings, so you can tailor an ignition curve to match your driving needs. The advance assembly features chromoly weights that slide on nylon pads for smooth timing advancement through the entire rpm range. There is also a vacuum advance canister to improve economy while cruising. All of these features are enclosed in a great looking, billet aluminum housing that is CNC-machined for accuracy and incredible strength. The distributors come complete and ready to drop in with a high-quality rotor and cap with brass terminals for great spark transfer. Simply connect a 12 V source to the distributor and you're up and running. They're designed to replace GM HEI distributors that use a 4-pin ignition module.

4.63 out of 5 stars ( 38 )

$649.95

—

$699.95

MSD RPM Activated Switches

From light bulbs, to the high-speed retard function on an MSD timing computer, to air shifters, these MSD rpm activated switches turn on almost anything. They use MSD's plug-in rpm modules to turn on your components at any rpm you select.

5.0 out of 5 stars ( 18 )

$181.95

MSD Distributor Rotors

MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.

4.73 out of 5 stars ( 154 )

$67.39

—

$67.49

MSD Circle Track Digital Soft Touch Rev Limiters

For the Saturday night racer, MSD circle track digital soft touch rev limiters produce a smooth, accurate rev-limiting action. They feature two rotary dials with an easy-view LED display, eliminating the need for plug-in rpm modules. A unique feature is each unit's ability to record the highest rpm reached during a race—which is helpful information for racers and tech officials alike. MSD rev limiters are epoxy filled to protect against the abuse of dirt track racing.

5.0 out of 5 stars ( 13 )

$249.95

Summit Racing™ RPM-Activated Switches with Digital Readout

Losing those little RPM modules can be a hassle, but now you can lose them all permanently. Our Summit Racing™ RPM-activated switches allow you to select an activation level anywhere from 1,000 to 9,900 rpm in increments of 100 rpm; and they work with 4, 6, and 8-cylinder engines. The switches will activate or deactivate via several trigger sources. Detailed instructions are included for rpm activation the easy way.

4.43 out of 5 stars ( 14 )

$79.99

Lingenfelter Performance Engineering Timing Retard Launch Controllers

Lingenfelter timing retard launch controllers can be used to provide consistent launch rpm off of the line in drag racing and other standing start racing applications. In turbocharged applications, they can help build additional boost off of the line. The controllers can also be used as an adjustable individual cylinder rpm limiter, providing reliable and fast-acting, spark-based engine rpm limit control.

5.0 out of 5 stars ( 28 )

$300.15

—

$446.45

MSD Digital 6CT Ignition Controllers

MSD Digital 6CT ignition controllers are hardcore ignitions that work as hard as you do at the track. Their superior design is packed with a slew of features, including a large, easy-to-read LED display and a simple setup utilizing three rotatory dials. MSD Digital 6CT ignition controllers offer the smoothest performance ever that comes in a fully potted, tamper-proof housing that uses a single connector to keep wiring tidy. MSD Digital 6CT ignition controllers feature: * Built-in start retard adjustable in 0, 10, or 20-degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Single plug-in connector for clean wiring * Tamper-proof screws to prevent modification of unit * Records highest rpm the engine turned for last 20 minutes of run time * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability

4.0 out of 5 stars ( 4 )

$511.95

—

$562.95

MSD Digital 6 Off-Road Ignition Controllers

MSD Digital 6 off-road ignition controllers deliver a fully potted design that provides the ruggedness and reliability needed to get your 4WD to any destination. These units multi-spark below 3,000 rpm on V8s—ensuring clean, crisp throttle response and complete fuel burn when crawling at low speeds. Above 3,000 rpm, a powerful capacitive discharge spark keeps the fire lit until you let off the skinny pedal. The smooth, accurate rev-limiter will protect your engine from over-rev damage due to drivetrain failure or a slick spot on the trail. Whether you're crawling rocks, high-speed desert racing, or playing in any kind of harsh terrain, your off-road rig can benefit from an MSD Digital 6 off-road ignition controller. Features include: * MSD's smoothest rev limiter yet! Easy on your engine * Fully potted design provides reliability even in high-vibration and wet circumstances * Large, easy-to-read LED display * Simple setup of features, such as the rev limiter, with three rotary dials on the face of the unit * Built-in Start Retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED displays rev limit, highest RPM turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Rugged housing to stand up to demanding off-road and race conditions * Single plug-in connector for clean wiring * Works on 4, 6, and 8-cylinder engines * Reverse polarity and overheat protection provide ultimate reliability

4.29 out of 5 stars ( 7 )

$562.95

Holley EFI Crank Trigger Kits

Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware

4.67 out of 5 stars ( 6 )

$649.95

—

$767.95

Summit Racing™ Ready-to-Run Billet Distributors

Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.

4.04 out of 5 stars ( 25 )

$359.99

Summit Racing™ Ignition Box and Coil Kits

Summit Racing™ ignition box and coil kits combine our Summit Racing™ 145 mJ Multi-Spark CDI system utilizing the latest RISC-based microprocessor-controlled circuitry and our high-output ignition coil that provides additional volts of spark energy. The coil has a lower primary resistance, higher rpm capability, and greater output than stock. The ignition box will create hot, consistent sparks for better performance throughout the powerband. Together, Summit Racing Equipment® ignition box and coil kits will deliver improved overall performance for your vehicle.

3.67 out of 5 stars ( 3 )

$326.98