1948 Ignition Components Ignitions & Electrical - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $125 at Summit Racing

PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems

4.7 out of 5 stars ( 209 )

$155.98

—

$208.60

Stromberg E-Fire Electronic Distributors

Stromberg E-Fire electronic distributors actually look like they rightfully belong on your traditional flathead motor. They feature a simple, built-in electronic ignition. No points, no condenser, no black or red box, no maintenance--no worries. These crab-style units bolt on like a stocker with a black cap, and they're easy to properly install with just two wires to your regular coil. Order a Stromberg E-Fire electronic distributor for your Ford flathead and bolt it on—it works straight out of the box! Features and specs: * 2- or 3-bolt mounting options available to match your application * Available in your choice of 6 V positive or 12 V negative ground * Designed as short as possible with hot rod builders in mind, so you can use the stock fan * Timing adjuster is on the side, so you don't have to turn the whole body * Static timing, advance rate and max total advance specifically tuned to suit the flathead V8 * Old-school performance tag with a unique ID number * For use with a points-style 1.5 ohms coil only

4.55 out of 5 stars ( 11 )

$480.00

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 1007 )

$134.31

—

$247.62

Summit Racing™ Blueprinted HEI Distributors

Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.

4.44 out of 5 stars ( 1256 )

$307.99

ACDelco Ignition Coils

Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.

4.68 out of 5 stars ( 34 )

$49.99

PerTronix Flame-Thrower Plug and Play Billet Distributors with Ignitor II® Module

PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.

4.22 out of 5 stars ( 364 )

$396.41

PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger

4.68 out of 5 stars ( 31 )

$197.27

—

$247.62

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$165.24

—

$296.99

PerTronix Flame-Thrower Stock Look Cast Distributors

Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts

4.23 out of 5 stars ( 261 )

$329.96

—

$396.41

FAST PS40 Ignition Coils

FAST PS40 performance ignition coils feature a special E-core design, which loses less voltage, so more spark gets to your plugs. The coils also have large-gauge wire windings for maximum spark current and voltage, with better heat dissipation at high-rpm. An insulated connector and high-tension tower protect against high-voltage arcing. They're also solid-epoxy encapsulated for shock and vibration protection.

5.0 out of 5 stars ( 4 )

$67.95

Davis Unified Ignition Buick Straight 8 D.U.I. Distributors

Davis Unified Ignition Buick Straight 8 D.U.I. distributors will light the fire of your vintage ride. Each of these high-powered ignitions is built with Davis's popular Street/Strip coil—so you can open the plug gaps to a massive .055 in.—and include the high-dwell Dyna-Module that allows the coil to produce a longer duration spark over stock ignitions. The Buick Straight 8 distributors have custom-tuned advance curves, they're all-electric—no points, and installation is easy. Bring your Straight 8 up-to-date by adding some serious firepower with a Buick Straight 8 D.U.I. distributor. Features and benefits include: * Simple one-wire hookup makes installation easier * Allows for wider plug gaps * All electronic ignition—no points * Dyna-Module and 50,000 V coil * Performance-tuned advance curve provides the most power throughout the rpm range, with no pre-detonation * Increased horsepower and fuel mileage * Quicker starting and smoother idle * Easy-to-follow instructions * Backed by a one-year warranty

Not Yet Reviewed

$479.00

Standard Motor Ignition Coils

Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.

4.43 out of 5 stars ( 83 )

$20.99

—

$56.09

PerTronix Ignitor® and Ignitor II® Replacement Modules

Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.

4.62 out of 5 stars ( 42 )

$107.30

—

$185.58

Trans-Dapt Performance Distributor Hold-Down Clamps

Trans-Dapt distributor hold-downs are perfect for that finishing touch to dress-up your engine. They are made from quality materials for good looks that will last.

3.71 out of 5 stars ( 34 )

$15.99

Mallory Unilite Distributors

These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.

4.12 out of 5 stars ( 57 )

$649.95

Standard Motor Ignition Breaker Points

Is it time for a tuneup? Replace your distributor's worn-out breaker points with new ones from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement breaker points are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These inexpensive units are available for use in a wide variety of makes and models. Trust your vehicle's ignition system needs to Standard Motor Performance.

4.15 out of 5 stars ( 20 )

$10.99

—

$18.99

On Sale

ACCEL Motorcycle Mallory E-Spark Distributors

Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with ACCEL Mallory E-Spark distributors. With E-Spark distributors, you'll have faster, easier starting with drop-in installation and no removal of the stock heads. These machined billet aluminum E-Sparks have a fully adjustable mechanical advance and can be used with kick-start applications. Update your ride and enjoy the benefits of these ACCEL Mallory E-Spark distributors.

2.0 out of 5 stars ( 1 )

$767.95

$690.95

PerTronix Flame-Thrower Type 1 Engine Distributors

Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.

4.52 out of 5 stars ( 54 )

$364.01

—

$379.38

ACDelco Distributor Condensers

ACDelco distributor condensers connect across the contact breaker points in the distributor and help provide a crisper spark at the plugs. They also retard erosion of the contact-breaker points for enhanced durability. The economical condensers are available in several models for fitment on thousands of vehicles. Order the unit recommended for your application.

4.82 out of 5 stars ( 11 )

$22.99

Standard Motor Distributor Caps

Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.

4.45 out of 5 stars ( 114 )

$9.99

—

$21.99

PerTronix Flame-Thrower British Engine Performance Distributors

PerTronix Flame-Thrower British engine performance distributors are modeled after the 45D Series distributor. Built using all-new castings, these distributors are precision-machined for an exact fit. They deliver twice the voltage to your spark plugs, increasing horsepower, fuel economy, and spark plug life. Flame-Thrower Performance distributors for British engines feature rotating cobalt magnets that trigger a Hall Effect integrated circuit. There are no points to burn or moving parts to wear out--in fact, you can expect a 2:1 improvement over points in current fall time for increased coil output. Their tailored advance curve provides optimal performance and drivability. PerTronix Flame-Thrower British engine performance distributors are made using an epoxy molding, making the module impervious to oil, grease, dirt, and moisture. Offered for 12 V negative and positive ground systems, these distributors feature stable timing with no need for adjustments.

5.0 out of 5 stars ( 11 )

$346.98

—

$396.41

Holley Crankshaft Trigger Wheels

Get the best possible sensor pickup with Holley crankshaft trigger wheels. These wheels have 60 notches, plus one TDC double notch. They are available in a number of different sizes to support the clearances on different engines from 5 in. to 8 1/2 in. in diameter. The center hole is 1 in. in diameter and may require machining for application.

Not Yet Reviewed

$306.95

Standard Motor Ignition System Condensers

Don't take chances with an old, questionable, or malfunctioning condenser that can leave you stranded. Standard Motor Products replacement ignition condensers are designed to exceed OEM specifications for reliable, maintenance-free operation. Trust your vehicle's ignition and electrical system needs to Standard Motor Performance.

4.44 out of 5 stars ( 18 )

$6.99

—

$16.97

Standard Motor T-Series Ignition Coils

Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.

4.56 out of 5 stars ( 16 )

$15.99

—

$20.99