Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
7 Results Found For "switch"
Showing In Stock Items. Show All 7 Items.
On Sale
Summit Racing™ RPM-Activated Switches with Digital Readout
Losing those little RPM modules can be a hassle, but now you can lose them all permanently. Our Summit Racing™ RPM-activated switches allow you to select an activation level anywhere from 1,000 to 9,900 rpm in increments of 100 rpm; and they work with 4, 6, and 8-cylinder engines. The switches will activate or deactivate via several trigger sources. Detailed instructions are included for rpm activation the easy way.
( 14 )
$79.99
$71.99
On Sale
MSD Programmable Shifter Controllers
RPM control for your transmission—MSD programmable shifter controllers allow you to set different rpm points to trigger the shift solenoids. Any configuration may be used on up to a 6-speed transmission. The controllers feature six LEDs on their end panels. Programming can be done on a Windows-based PC or with MSD's hand-held monitor (not included). MSD programmable shifter controllers include: * Shift controller * Pro-Data+ software * 9-pin harness—10 ft. * 1-pin harness * Deutsch terminated harnesses * Butt splices * Ring terminals * Screws, nuts, and washers
Not Yet Reviewed
$899.95
$507.05
On Sale
MSD Power Grid Power Modules
Get on the performance grid with MSD Ignition Power Grid power modules. When connected to the Power Grid, they will data log all the functions--including time from launch and time or rpm of activation and deactivation. These timing controllers feature four high-current, solid-state switches that can be configured independently or in conjunction by time, rpm, and temperature switching on/off, as well as by percentage for nitrous systems. Each channel is capable of handling 20 amps of current without the use of a relay and can be used to activate fan, fuel pump, nitrous oxide system, throttle stop, and more--the possibilities are endless.
( 1 )
$749.95
$422.86
On Sale
Mallory Unilite Breakerless Ignition Conversion Kits
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$176.95
$100.16
On Sale
MSD Programmable Midget Ignitions
MSD programmable Midget ignitions help deliver every ounce of power from your Midget engine. They're a complete electronic distributorless system with a powerful capacitive discharge ignition control, and a four-tower, high output coil pack that uses two non-magnetic pickups with a trigger wheel. MSD has taken all of the mechanical variables out of the picture and given you exact ignition timing for more power, more control, and more performance. You can precisely program the timing throughout the engine's entire rpm range. Their programmable features include the ability to: Plot two timing curves ranging from 800-15,000 rpm in 0.1 degree increments, program a start retard for easier timing, select a rev limit from 2,000-15,000 rpm in 100 rpm increments, and switch between two timing curves as track conditions change during a race! These features can be programmed from a PC with MSD's Pro-Data+ software, or with the available hand-held monitor.
Not Yet Reviewed
$1,449.95
$975.47
On Sale
Summit Racing™ Digital RTR Plus Billet Distributors
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.
( 7 )
$349.99
—
$389.99
$314.99
—
$350.99
On Sale
Summit Racing™ Ready-to-Run Billet Distributors
Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.
( 29 )
$277.99
$250.19
