Availability
Showing In Stock Items. Show All 14 Items.
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$165.50
—
$398.40
$148.95
—
$358.56
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$592.00
$136.53
—
$532.80
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$212.15
—
$280.10
$190.94
—
$252.09
On Sale
These PerTronix replacement Flame-Thrower ignition modules feature the Hall effect integrated circuit triggered by a special magnetic sleeve fitted to the distributor shaft, which results in stable timing and precise spark distribution. They use a powerful micro-controller with dwell algorithms that allows the modules to adjust the dwell angle to maintain peak energy throughout the entire rpm range, increasing both the high and low rpm performance. Keep your distributor running smoothly and flawlessly with one of these PerTronix replacement Flame-Thrower ignition modules.
( 78 )
$135.25
—
$223.30
$121.72
—
$200.97
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 137 )
$433.40
—
$479.55
$388.65
—
$431.60
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
$145.58
—
$215.32
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
—
$223.30
$193.32
—
$200.97
On Sale
MSD digital multi-retard timing controls provide four different stages of retard, along with an adjustable start retard feature--with no modules! These units use a high-speed RISC micro-controller to direct the timing functions. This controller can make extremely quick compensations to the timing, while maintaining accuracy to within 1 degree. These circuits are thoroughly de-bounced and isolated for protection against Electro Magnetic Interference (EMI). There is also an innovative magnetic pickup compensation circuit built-in to allow for rock-steady timing with a variety of different mag pickups. There are four separate retard stages that can be activated independently or together for a total sum of retards. Each stage is adjustable from 0-9 degrees, and a maximum of 20 degrees of retard can be pulled out. On top of these great features, there is also an optional start retard circuit that can be programmed to retard the timing 5, 10, 15, or 20 degrees during cranking. Digital multi-retard timing controls can be used on 4, 6, or 8-cylinder engines, and must be used with an MSD ignition control.
( 2 )
$499.95
$274.95
On Sale
PerTronix Flame-Thrower Street/Strip HEI distributors with HEI III modules reduce misfires and improve engine performance. These powerful energy sparkers feature a specially designed module—the HEI III—that delivers multiple sparks and adaptive dwell that maintains peak energy through the entire RPM range. Flame-Thrower Street/Strip distributors have a factory-installed performance advance curve and an adjustable vacuum advance. They offer operation without misfire beyond 7,500 rpm—nearly 3,000 rpm higher than most stock HEI distributors. Order the model recommended for your application. Additional features: * Integrated digital rev limiter with LED feedback for precise RPM setting * Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability * Adjusts spark timing at higher RPM to compensate for the inherent electronic delay * Senses startup and increases energy for quicker, easier starting
( 6 )
$366.55
—
$383.00
$329.90
—
$344.70
On Sale
PerTronix Flame-Thrower HP distributors feature new, lightweight, cast aluminum housings and a tailored advance curve for optimal performance and drivability. They use an integrated Ignitor II® electronic ignition with variable dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. The distributors develop, on average, four times more available energy between 3,000 and 5,000 rpm and two times more available plug voltage. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing ignition coil and module life. The PerTronix Flame-Thrower HP distributors include a balanced rotor with an over-molded brass contact and a high-dielectric cap with brass terminals.
Not Yet Reviewed
$335.25
—
$368.15
$301.72
—
$331.34
On Sale
Standard manufacturers high-quality parts for all import and domestic vehicles utilizing precision manufacturing, multiple layers of testing, and a detailed validation process that ensures Standard parts don't just fit, they perform and last. Standard Motor ignition coil ground straps ensure a secure, low-resistance path for electrical current. They are for safety, making sure the coil is properly grounded, preventing electrical interference and maintaining the proper function of your ignition system. Standard ground straps are the ideal choice to replace an old OE or missing strap on your vehicle.
( 1 )
$1.99
$1.79
On Sale
PerTronix offers a wide range of parts and accessories for ignition systems—including these ignition wire towers. The replacement spark plug terminals are designed for Ignitor and Ignitor II kits. The original Ignitor module is ideal for restorations. Ignitor module kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required, maintaining a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points—and will cover automotive, marine, industrial, and agriculture applications.
Not Yet Reviewed
$28.10
$25.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
