Availability
Showing In Stock Items. Show All 19 Items.
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$759.58
—
$1,025.54
It's time to outfit your vehicle with a high-quality, high performance ignition system—and these MSD combos from Summit Racing™ make it a breeze! The kits start with a 6A digital CD ignition box, then add a high-efficiency Blaster coil and a Pro-Billet distributor. We finished the combos with a complete set of Street Fire wires to deliver all of that powerful spark! Wake up your street and strip engine with a powerful Summit Racing™ MSD complete ignition combo, available for applications as far back as the 1950s.
Not Yet Reviewed
$1,030.54
These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!
( 18 )
$799.95
—
$999.95
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$999.95
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$878.75
Manufacturer Rebate
PerTronix Digital HP ignition system bundles make matching up the proper components for your application a snap. And you get everything you need at a value-added bundled price. Each of these bundles will include a PerTronix Digital HP ignition box, an HP 50,000 V coil, and a plug-and-play billet magnetic trigger distributor. PerTronix Digital HP bundles are available for the most popular Chevrolet and Ford engines, with black caps and your choice of black or silver anodized boxes. Choose the PerTronix Digital HP Ignition System Bundles design best suited for your application.
Not Yet Reviewed
$755.40
—
$784.60
Now you can have a balanced performance ignition system that is designed to make the most horsepower without mixing and matching components. ACCEL Motorcycle Super Single Fire ignition systems are complete bolt-on systems that are designed to work together to produce an adjustable ignition that outperforms others. Each Super System includes the adjustable ignition module, a Single Fire Super Coil, ACCEL high performance U-groove spark plugs, and ACCEL black 8.8 performance spark plug wires. These systems are easily installed and simply adjusted with switches on the module to produce the performance to match your machine.
Not Yet Reviewed
$949.95
Jesel Pro Series distributor drive kits are ideal for naturally aspirated engines. They feature Gates PowerGrip HTD belts and use Moroso Ultra Series distributor components. The balanced brass rotor tip and form-staked carbon ball on the coil lug have been designed to eliminate grounding paths and crossfiring. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Pro distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 1 )
$815.00
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
—
$910.00
JMS Chip CD-1 Super Speedway ignition systems are complete plug-and-play capacitive discharge ignition kits designed specifically for professional racing. They include CD-1 Super Speedway ignition module, CD-1 SS ignition coil, the wiring harness and mounting plate. Unleash the power of your vehicle with JMS Chip performance products! Main features: * Plug-and-play unit is compact, lightweight and has fully encapsulated construction using surface mount electronics * Waterproof and highly resistant to vibration and shock * Uses an advanced 12-pin Deutsch connector for signal connections and components * All wires terminated into plug-and-play Weatherpack connectors * Compatible with 8-cylinder racing engines triggered by a magnetic pickup distributor or crank trigger * 135 mJ spark energy output * Set maximum RPM limit up to 9,000 rpm with 100 rpm steps * Highly efficient switching power supply based on US patents 6518733 and 6636021 * Less than 5-amp current draw at 8,000 rpm * Approved for Southern Super Series cars, Super Late Model Tour and Spears Southwest Tour Series
Not Yet Reviewed
$829.75
Granatelli Motor Sports Pro Series coil packs exceed your OEM expectations with increased performance. Pro Series 60,000 V coils provide more volts than factory and are intended for those running high compression engines and small nitrous kits. These coil packs increase horsepower and improve mileage and throttle response; plus, they are OBD-II computer safe. Thanks to Granatelli patent protected isolator rings, there's no RFI/EMI interference and 0 ohm resistance. Get incredible output with a set of Granatelli Motor Sports Pro Series coil packs.
( 5 )
$814.86
—
$820.09
Edelbrock Supercharged coil covers dress up your engine. These cover kits are geared towards those with Edelbrock competition versions of the supercharger kits, which do not include coil covers, but would like to add them. The covers are designed to fit around the supercharger units, are available in many styles in black, red, or red and black, and feature a "Supercharged" logo design.
Not Yet Reviewed
$1,068.95
FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.
Not Yet Reviewed
$824.95
—
$1,115.95
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$774.01
—
$845.23
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$922.95
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
MSD Ignition 12 amp electronic points boxes control the spark duration and the unique full power firing sequence of several magneto units, including the Pro Mag 12, Pro Mag 12LT, and Pro Mag 20. The energy from the generator is controlled with Field Effect Transistor (FET) technology, which is far superior to mags still using points as a trigger source. FETs are considerably more accurate and durable—and are capable of handling much more current. This is why the Pro Mag can deliver full energy sparks throughout the entire rpm range of the engine, while conventional magnetos fall short of full power at high racing rpm. Plus, these advanced points boxes keep each spark glowing for up to 26 degrees of crankshaft rotation.
( 1 )
$999.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
