Availability
Showing In Stock Items. Show All 12 Items.
Granatelli Motor Sports Malevolent coil packs deliver nearly twice the voltage as the competition. Rated at up to 85,000 V, these nasty little units not only increase power to your plugs, but improve fuel economy, throttle response, and idle characteristics. Malevolent coil packs are bred of a one-piece design that offers you a direct OEM replacement with simple plug-and-play installation—and they won't void your factory warranty! Increase your engine efficiency with improved combustion, powered-up though the intense-performing Granatelli Motor Sports Malevolent coil packs. Order the individual pack or set recommended for your vehicle and engine application.
( 15 )
$775.06
Granatelli Motor Sports Pro Series Xtreme coil packs output a whopping 65,000 V, making them the undisputed king of coils. Specifically designed for supercharged, turbocharged, and high-level nitrous applications, these Xtreme coils will not suffer the spark blowout common in weaker coils. And, thanks to Granatelli's patented isolator rings, there is 0 ohm resistance and no RFI/EMI interference. Up your engine's power to perform with a set of Pro Series Xtreme coil packs from Granatelli Motor Sports.
( 13 )
$801.24
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$878.75
FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.
Not Yet Reviewed
$824.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 52 )
$750.95
Jesel Extreme Series distributor drive kits were introduced in 2011, and are designed to handle the high cylinder pressures experienced in Pro Stock and Pro-Mod type engines. They feature MSD 5 in. Pro-Caps to ensure accurate spark delivery, as well as to reduce spark scatter frequently experienced in high cylinder pressure applications. Jesel belt-driven distributor systems are direct bolt-on accessories to their camshaft belt drives, eliminating timing inaccuracies due to camshaft deflection and cam walk. By driving the distributor drive directly off the camshaft pulley, ignition timing stays constant and will not deviate from the initial settings. Plus, Jesel Extreme distributor drives provide the ability to set the engine back further in the chassis without worrying about firewall or windshield interference.
( 2 )
$890.00
FAST XR-1A high-output ignition coils are designed specifically for high-compression naturally aspirated, boosted, or nitrous-equipped applications making more than 1,000 hp. This horsepower range is far beyond the capabilities of OE coils. The spark energy of the FAST coils is comparable to CDI (capacitive discharge ignition) systems without the need to convert. The smart coil design also requires no ignitor module. XR-1A high-output ignition coils deliver up to 44,000 volts, 103mJ of energy, and support a maximum of 19 amps of current and 17 volts. They're designed to work with all OEM equipment, as well as FAST products that support coil-near-plug applications such as the XIM and EZ-LS ignition controllers. Order the coils for your application individually or in a set of eight.
Not Yet Reviewed
$773.95
—
$843.95
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$1,078.95
$751.13
On Sale
MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection
Not Yet Reviewed
$921.95
Choose EFI main power wiring harnesses from Holley to meet your needs. Several choices are offered—TBI, LS applications, multi-point, and un-terminated harnesses—to feed and carry your engine's electrical supply. Get wired for electronic fuel injection with Holley EFI systems main wiring harnesses.
Not Yet Reviewed
$972.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 628 )
$767.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
