Availability
Showing In Stock Items. Show All 14 Items.
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$548.62
—
$771.88
PerTronix Flame-Thrower ignition system bundles offer improved performance with more horsepower and better throttle response. Plus, they include everything you need in one box at a great price. Each of these bundles includes: a Flame-Thrower billet plug-and-play distributor with Ignitor II or Ignitor III module technology; a matching low-resistance Flame-Thrower chrome coil; and a set of Flame-Thrower 8mm MAGx2 universal wires (featuring silicone jackets) to resist high temperatures. PerTronix Flame-Thrower ignition system bundles typically offer a choice of red or black cap, and they're available for the most popular Chevrolet and Ford engines, as well as Chevy marine engines.
( 6 )
$507.65
—
$574.50
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$724.95
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$632.95
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$526.25
—
$592.00
Sierra Marine Delco EST conversion kits upgrade GM engines with conventional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines. Sierra Marine Delco EST kits include: * Delco EST (Electronic Spark Timing) distributor * Coil * Ignition wires * Harnesses
( 3 )
$651.99
—
$672.99
These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!
( 18 )
$799.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 999 )
$510.85
—
$573.95
On Sale
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$977.95
—
$1,078.95
$545.95
—
$733.46
Summit Bucks
Your Harley® will run much better with Daytona Twin Tec Model 1005 internal ignition kits versus the older solid-state points eliminator that relied on the mechanical advance flyweights and all that. The "race mode" settings are awesome! They'll wake up your old bike. The advance curve network with adjustable advance slopes will accommodate stock to highly modified engines. You can digitally set the rpm limit, select single or dual fire mode, and multi-spark mode for quick starting and smooth cruising. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$514.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
