Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
28 Results Found For "Billet"
Showing In Stock Items. Show All 32 Items.
ICT Billet Ignition Coil Brackets
How important are ignition coils to the performance of your vehicle? Well, without them your spark plugs would never receive the high voltage needed to ignite the fuel. Securing them is also important—and that's the function of ICT Billet ignition coil brackets. Made from aerospace-grade aluminum, these brackets offer mounting points for a variety of coil styles. The brackets are available in different configurations and finishes; hardware is also included. Choose the brackets designed for fitment on your make/model.
( 28 )
$58.99
—
$87.99
ICT Billet Remote Mount Ignition Coil Relocation Brackets
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
On Sale
MSD Distributor Cap and Rotor Kits
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 519 )
$74.29
$50.27
—
$66.86
On Sale
MSD Replacement Distributor Caps
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$58.95
—
$81.05
$53.06
—
$72.95
On Sale
MSD Replacement Cables
When you need to replace your worn-out or burned cables, MSD offers all of the cables you will ever need. You could also use these cables to connect your MSD unit to your distributor.
( 70 )
$60.75
—
$67.55
$54.68
—
$60.80
On Sale
MSD Distributor Hold-Down Clamps
MSD's distributor hold-down clamps are strong enough to keep the timing locked in place whether you are using an MSD billet distributor or Pro-Mag. These MSD hold-down clamps are precision-made and fit all MSD Pro-Billet Chevrolet distributors and the Pro-Mags. Each of these clamps includes a mounting stud, lockwasher, and nut.
( 24 )
$61.25
—
$89.15
$55.13
—
$80.24
On Sale
MSD Cap-A-Dapts
MSD Cap-A-Dapts have HEI-style posts, an adjustable rotor to allow proper phasing (Chevy and Mallory YL only), and wider post spacing to prevent crossfire and ionization. The kits include a high-quality cap with brass terminals, a rotor, and a cap spacer.
( 45 )
$97.99
$88.19
On Sale
MSD Distributor Rotors
MSD distributor rotors are molded from high-quality, voltage-insulating Rynite or alkyd materials to resist carbon tracking, while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage-carrying capabilities, the rotor tips are made from low-resistance brass.
( 152 )
$60.75
$54.68
PerTronix Flame-Thrower Distributor Cap and Rotor Kits
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$50.08
—
$67.87
Summit Racing™ LS Coil Brackets
Summit Racing™ LS coil brackets allow you to mount your coil packs in the OEM location on top of the valve covers. These brackets and made from high quality materials and finished to protect against harsh under-hood conditions like high heat and corrosion.
( 8 )
$51.99
On Sale
MSD Extreme Distributor Caps
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$89.15
$80.24
MSD HEI Coil Dust Covers
MSD HEI coil dust covers are designed to protect your coil and top off your distributor's complete look. They are manufactured of high-impact Rynite and feature the standard red MSD color.
( 9 )
$60.75
Drag Race Solutions Ignition Coil Mounting Brackets
Drag Race Solutions ignition coil mounting brackets feature CNC billet aluminum construction available with a satin black powdercoat or triple chrome plate finish. They come with stainless steel mounting bolts and aluminum spacers to mount brackets directly to a Big Block Chevy cylinder head. Drag Race Solutions ignition coil mounting brackets fit MSD Pro Power, HVC, and HVC II coils.
Not Yet Reviewed
$99.99
On Sale
MSD Pro Mag 44 Replacement Cap and Rotor Kits
These cap and rotor kits from MSD are replacements for the 44 amp Pro Mags, or the 12 amp band clamp models. The caps are molded form alkyd material and have excellent high-voltage characteristics. Brass spark plug style terminals are used for solid connections and a firm grip to the plug wire terminal. The rotors are injection-molded from Dupont Rynite, a strong glass-reinforced material. Tall vanes are molded on the top of the rotors to stir up the air, preventing ozone buildup and crossfire from occurring. A brass/stainless steel rotor tip is screwed into the rotor, ensuring a long life at high rpm.
( 3 )
$81.05
$72.95
Philadelphia Racing Products MSD Box Mounting Brackets
Philadelphia Racing Products MSD box mounting brackets feature permanently mounted frames and inserts that can be removed with the twist of two quick-release clips. Simply remove the quick-release clips and the box is out; change or mount the box on the bench and re-install. These PRP brackets are made of billet aluminum with the frame anodized black and the insert anodized clear for a great two-toned look. MSD boxes are hard to change as it is, and now Philadelphia Racing Products has made it easy.
Not Yet Reviewed
$66.99
On Sale
MSD Pro-Caps
MSD Pro-Caps are larger than standard caps, to handle more voltage. Each terminal is spaced exactly 2 in. apart to deliver spark to the right plugs with less spark scatter. The caps are molded from DuPont Rynite for maximum strength, and the rotors feature thick vanes, deep skirts, and a dual screw-down rotor tip for long life. The Pro-Cap bases bolt on to most MSD distributors.
( 4 )
$101.95
$91.75
PRW LS Series Coil Brackets
Dress up your factory LS valve covers with PRW LS Series coil brackets. Manufactured from billet aluminum, they are polished to a brilliant finish with a protected clear anodizing. These PRW coil brackets include mounting hardware.
( 2 )
$84.88
PerTronix Distributor Caps
When it's time for a tune-up, PerTronix offers quality distributor caps to replace your worn-out original. Why take chances with old, questionable, or faulty ignition components that can leave you stranded. PerTronix distributor caps are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to PerTronix; order the model and options best suited for your vehicle.
( 36 )
$56.40
—
$56.99
On Sale
MSD Distributor Replacement Parts
MSD has the replacement distributor parts that you need. Don't replace a worn or broken part with another substandard piece. MSD is on the leading edge of production and design and they have one of the strongest reputations in the industry. Look to MSD for reliability, consistency, and the quality products that your ride deserves.
( 22 )
$66.99
BluePrint Engines HEI Large Cap Distributors
BluePrint Engines HEI large cap distributors are known for their in-cap coil and simple one-wire hookup. These simple, yet effective distributors work great on builds where firewall clearance is not an issue. BluePrint HEI large cap distributors are available with a black or red cap. Specs: * Computer-controlled compatible: No * Trigger style: Magnetic * Advance type: Vacuum and mechanical * Cap style: Male/HEI * Mechanical tach drive: No * Slip collar: No * Distributor gear material: Melonized steel * Ignition box required: No * Distributor gear rotation: Standard * Housing material: Billet aluminum * Housing finish: Natural * Marine use: No Notes: These are "large cap" HEI distributors with an in-cap coil. They primarily fit trucks and full size vehicles. They do not typically fit Camaros, Novas, Corvettes, etc. Please confirm firewall and wiper motor clearance before ordering
( 11 )
$99.99
BluePrint Engines External E-Core Ignition Coils
BluePrint Engines external E-Core ignition coils put out 50,000 volts for a much hotter and larger spark to burn fuel more efficiently, up to 70 percent more spark energy than most stock applications. Secured in a billet aluminum housing to better dissipate heat, these coils are easy to mount on firewalls and fenders—with a brass coil wire attachment for clean installation. The ignition coils feature top-quality epoxy internal construction and a premium E-Core magnet to ensure superior output and smooth acceleration throughout the entire RPM band. A mounting bracket is included.
( 1 )
$59.99
Howards Cams Everwear™ Distributor Gears
Howards Cams Everwear™ distributor gears are manufactured from a special iron alloy with the Everwear™ process. The Everwear™ process increases surface hardness, lowers coefficient of friction, enhances surface lubricity, improves running wear performance, increases sliding wear resistance, and enhances corrosion resistance. Designed for use with all cast flat tappet, most hydraulic roller and mechanical roller camshafts with cast gears. Not for use with billet or hardened camshafts.
( 15 )
$72.99
—
$76.99
Clearance
Philadelphia Racing Products Coil Mounting Brackets
Philadelphia Racing Products has done it again with their newly designed LS coil mounting brackets. These brackets are engineered to fit LS1, LS2, LS6, LS7 engines, and will fit MSD coils. Each bracket is designed to be remote mounted, and comes complete with stand-offs for easy removal. Brackets are CNC-machined out 6061 billet aluminum. The stands are clear anodized and brackets are black anodized for a great finishing touch and corrosion protection. Kits come complete with stainless hardware for mounting.
Not Yet Reviewed
$140.99
$98.50
Crower Bronze Distributor Gears
Made from premium aluminum bronze alloy, these precision-machined bronze distributor gears from Crower are highly recommended for performance cam applications. They are mandatory when running 8620 steel billet roller camshafts.
( 2 )
$88.99
—
$92.99
