Availability
Showing In Stock Items. Show All 25 Items.
Cardone remanufactured camshaft position sensors supply a guaranteed fit and function that meets or exceeds OEM performance. Product features include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size—as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application. If the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage—possibly even engine failure * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, setting of the "Check Engine" light, and premature failure
Not Yet Reviewed
$544.99
Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.
( 31 )
$303.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$255.65
—
$272.10
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$499.95
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$549.95
$274.95
—
$528.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$499.95
Edelbrock Pro-Tuner EFI distributors are designed for use with the Victor and Super Victor Pro-Tuner EFI systems and are also compatible with other aftermarket EFI management systems. They have a magnetic crank pickup and use a Hall-Effect pickup with an LED indicator for the camshaft sensor. Their cam sync pickup can be adjusted manually or with EFI Management software. The cam sync has a 12 in. lead with a 3-prong Weatherpack connector. The crank trigger has an 8 in. lead with a 2-prong Weatherpack connector.
( 2 )
$458.95
Designed for engines with up to 14.5:1 compression ratios, nitrous, superchargers, or turbos, FAST's HI-6R ignitions keep your ride performing all the way down the track. These fully digital, multi-spark, CD ignitions deliver higher spark-gap current than comparable digital CD ignitions. Designed for street and racing use, they come with FAST's "Plug-n-Go" universal harness to cover most installations, with optional harnesses available separately. Their built-in rev limiter automatically drops cylinders in firing order to prevent fuel loading, and is adjustable by increments of 100 from 600-9,900 rpm, without the need for chips. Other built-in features include a tach accuracy check, a system problems check for easy problem diagnosis, and crossfire protection for supercharged and turbo applications. The optional 0-20 degree adjustable timing retard and MAP sensor make a great combination for nitrous and turbo applications. They feature fully potted construction with soft urethane for heat, dirt, and moisture protection, and an anodized heat-sink shell for reliability. FAST designed them to be points, mag, or module-triggered for 4, 6, and 8-cylinder engines with distributors.
( 3 )
$320.95
Get the best possible sensor pickup with Holley crankshaft trigger wheels. These wheels have 60 notches, plus one TDC double notch. They are available in a number of different sizes to support the clearances on different engines from 5 in. to 8 1/2 in. in diameter. The center hole is 1 in. in diameter and may require machining for application.
Not Yet Reviewed
$299.95
JMS Chip PowerMAX FuelMAX V2 are devices that truly deliver! These fuel pump voltage boosters provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle. Up to an 80 percent increase in fuel delivery is possible to feed your high performance engine! The maximum output voltage range is user selectable and is controlled by a knob in the faceplate, or via the optional in-cabin over-ride control knob that adjusts voltage on the fly. These JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump. PowerMAX FuelMAX V2 units feature proprietary enclosures and industrial heat-sink, with 10-gauge heavy-duty wiring and either 40 or 80 amp fuses—along with a host of innovative features to further improve your experience. For users that want the ultimate in easy installation, the plug-and-play option connects directly to the FPDM (fuel pump driver module) and activates via monitoring the pedal position sensor (PPS), eliminating the need to run wires through the firewall. Also available is a universal device that is easy to wire in--just cut and splice a single wire. Choose from single or dual inputs/outputs, cut-and-splice or plug-and-play versions, and 3-ways to trigger boosted output. Kits include: * PowerMAX device * Heavy-duty OEM-grade wiring harness * User adjustable Hobbs pressure switch * 1/8 in. NPT adaptor fitting * Wiring terminals * Wire splices and heat shrink * Solder * Vacuum line and tees * Mounting hardware * 40 amp fuses
( 4 )
$499.75
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$302.95
—
$549.95
Sierra Marine Thunderbolt IV HEI distributors are designed as a direct replacement for Mercury Thunderbolt IV ignition distributors. They use a hall effect-type sensor to trigger ignition accurately, even at low rpm. They meet or exceed SAE J1171 standards.
( 2 )
$315.99
—
$378.99
NOS two-stage wide open throttle/rpm-activated window switches are a compact, user-friendly way to eliminate the need for replacing rpm pills every time you want to change the activation rpm of your nitrous kit. They take window switches to the next level, too, eliminating the need for two rpm-activated window switches to control your two stages of nitrous! NOS two-stage wide open throttle/rpm-activated window switches feature two fully programmable independent rpm window switches. They can operate from 0 to 20,000 rpm for anything from a low-rpm engine to a high-revving sport bike, and they are perfect for carbureted or EFI vehicles. Their capability to read a rising or falling throttle position sensor provides accurate activation--every time. A programmable output activates a shift light for on-time, gear-pounding shifts, and the recall feature shows max rpm and TPS voltage for easy setup. NOS two-stage wide open throttle/rpm-activated window switches have a bright, easy-to-read display and bright LEDs that light up when stages are active for easy activation verification. These versatile switches can be used for nitrous or to activate other accessories.
( 10 )
$299.95
Recently, engineers at FAST turned to the OEMs to see what they trust in the way of rpm-measuring crank triggers for their 400 and 500 horsepower daily drivers. Until now, flying magnetic trigger wheels with bulky inductive pickups have been used with the risk of broken magnets or losing magnets at high engine rpm. Now there is a better answer--FAST magnet-free crank trigger kits. A magnet-free device, these kits from FAST include a wheel constructed from ASTM A36 grade steel that is so strong that it only needs to be .125 in. thick and is virtually indestructible. With the wheel being this thin, it not only weighs less but requires less space than competitors' aluminum versions. And the FAST inductive sensor is also much smaller than others on the market and is hermetically sealed with the connector molded into the body. The key to the crank trigger's dependability and accuracy lies in the trigger wheel design. Rather than having added magnets, the wheel has tabs on the outer rim. These tabs are measured by the inductive sensor as the wheel revolves, which then provides data to the fuel injection and ignition systems for accurate rpm measurement. And because the tabs are a part of the single wheel unit, there is no possibility of loss or fragmentation as with the magnetic style trigger wheels. This sensor is used by OEMs both on and inside the engine and provides long-lasting, accurate timing. Installation is straight forward, and everything required is included. For those already using the FAST XFI system, it's a plug and play unit. In addition, it's compatible with many other EFI systems on the market.
( 2 )
$303.95
If you're experiencing an original equipment malfunction or simply looking for a more adaptable and tunable upgrade, Daytona Twin Tec TC88 Plug-In ignition modules offer timing advance modifications to accommodate stock-to-customized engines. Their adjustability factor and easy plug-in installation are the big reasons for their use, as well as their easy-to-dial-in digitally set rpm limits with a selectable multi-spark mode for quick starting and smooth cruising. Daytona Twin Tec's product focus is electronic fuel injection and ignition systems for Harley-Davidson® motorcycles. These modules support all sensors, including theft/security systems. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$343.95
Just do it. Installing Daytona Twin Tec TC88 ignition kits are one of the best things you can do to your bike. With them, you'll pull harder, start faster, won't foul the plugs, and it'll idle great, too. If you're looking for a more adaptable and tunable upgrade and timing advance modifications to accommodate stock to customized engines, their adjustability factor and easy plug-in installation are the big reasons for their use, as well as the easy to dial-in, digitally set rpm limits with a selectable multi-spark mode for quick starting and smooth cruising. Daytona Twin Tec's product focus is electronic fuel injection and ignition systems for Harley-Davidson® motorcycles. These modules support all sensors, including theft/security systems, and include the TC88 ignition, coil, and wire sets. An optional USB interface and software for programming custom advance curves are available.
Not Yet Reviewed
$419.95
—
$491.95
Dynatech TC88-3 ignitions signal a new era in carbureted Harley-Davidson® Twin Cam ignition power and capability. The TC88-3 provides an extremely wide range and high level of advance curve functionality for Twin Cam engines with eight different rev limiter settings from 5750 to 7250 rpm (in 250 rpm steps). All TC88-3 functions have full digital accuracy to ensure maximum performance with unparalleled quality. Features include: * Single-fire, fully-programmed performance ignition * Programmable advance curves, in three engine groups: stock to slightly-modified; heavily-modified; insanely-modified * Coil compatibility from stock to performance (less than 1 ohm resistance) * Coil current is constantly monitored to provide constant full spark energy * All stock sensors used * Uses OE mounting points * Connects with OE connectors * Reverse battery and spike protection built in
Not Yet Reviewed
$264.99
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$461.00
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$599.95
$389.95
You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.
( 8 )
$399.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
