Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
48 Results Found For "gears"
Showing In Stock Items. Show All 59 Items.
On Sale
MSD Pro-Billet Distributors
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 406 )
$749.95
$389.95
—
$491.95
Biondo Single Shift RPM Activated Switches
Biondo single shift rpm activated switches can handle up to four adjustable digital shift points. Feature/Spec: * Auto reset--no buttons to press * Shifts from one to four gears * Ignition On/Off input to disable shift output when not in use * Mounting tabs for easy installation * Microprocessor-controlled timing * Retain all numbers when powered off * Large LCD * 3,000-9,900 rpm range can be changed by pushing the buttons on the face of the unit * Test your shifts by holding down either button for two seconds * Two separate outputs--normally open, and closed (for CO2, air, or electric shift applications)
( 8 )
$271.99
PerTronix Flame-Thrower Stock Look Cast Distributors
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 256 )
$255.65
—
$398.40
BluePrint Engines Pro Billet Ready to Run Distributors
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 5 )
$299.99
MSD Circle Track HEI Distributors
MSD Circle Track HEI distributors were designed with the demands of racing in mind. These "stock appearing" units are peaked and tuned to provide ultimate reliability and strength to run circles around the competition. The bulletproof ignition module fires a high-output coil in the cap, while a specially designed, QPQ-coated chromoly advance cam and weight set ride on TIG-welded weight plate pins and a TIG-welded distributor shaft. This combination provides brute strength and precision timing from idle to maximum rpm. At the bottom, a QPQ-coated steel gear will run lap after lap, race after race, victory after victory without fatigue.
( 2 )
$449.95
MSD Pro-Billet Oil Plugs
MSD Pro-Billet oil plugs keep your front drive distributor running like new. Their front drive distributors brought the need for distributor plugs. These plugs are made of billet aluminum and feature a slip collar to ensure correct installation depth.
( 3 )
$306.95
Davis Unified Ignition 5.0 Hot Forged Distributors
Davis Unified Ignition offers 5.0 hot forged distributors for a variety of Ford Mustang and F-150 applications from the 1980s and '90s. These replacements deliver reliable performance and show-quality looks! They have the toughness and durability that 5.0 engines demand. Hot forging provides a denser and stronger distributor, compared to cast aluminum and billet models. Each unit is tested for thermal shock and accuracy between 8,000 and 10,000 rpm. Machined using CNC mills and lathes, the distributors are made to exact tolerances. They include a high-dwell Dyna module for increased spark duration, which provides a better burn of the fuel mixture. DUI 5.0 hot forged distributors come with a steel gear installed for compatible roller camshafts. Order the model recommended for your vehicle.
( 15 )
$359.00
MSD Pro-Billet Crank Trigger Distributors
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$409.95
—
$460.95
On Sale
Holley Sniper HyperSpark Ready to Run Small Cap Distributors
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$310.11
—
$366.41
FiTech Go-Spark Distributors
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$285.00
—
$459.00
On Sale
Holley EFI Dual-Sync Distributors
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$499.95
—
$549.95
$281.55
—
$310.11
PerTronix Billet Plug and Play Distributors
These PerTronix billet plug and play distributors feature the Ignitor II electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 5 )
$402.60
PerTronix Flame-Thrower Street/Strip HEI Distributors with HEI III Modules
PerTronix Flame-Thrower Street/Strip HEI distributors with HEI III modules reduce misfires and improve engine performance. These powerful energy sparkers feature a specially designed module—the HEI III—that delivers multiple sparks and adaptive dwell that maintains peak energy through the entire RPM range. Flame-Thrower Street/Strip distributors have a factory-installed performance advance curve and an adjustable vacuum advance. They offer operation without misfire beyond 7,500 rpm—nearly 3,000 rpm higher than most stock HEI distributors. Order the model recommended for your application. Additional features: * Integrated digital rev limiter with LED feedback for precise RPM setting * Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability * Adjusts spark timing at higher RPM to compensate for the inherent electronic delay * Senses startup and increases energy for quicker, easier starting
( 6 )
$366.55
PerTronix Flame-Thrower HEI Distributors
Experts agree that HEI ignition performance relies on a quality module and coil. Pertronix believes the combination of a great module and a great coil makes their Flame-Thrower HEI distributors the best. They've engineered the module and coil to work together to provide you with superior ignition performance on the street or track. Compare the Flame-Thrower high performance module and coil to an original GM HEI distributor and you'll find these improvements: * Operates without misfires up to a minimum of 7,500 rpm, nearly 3,000 rpm higher than most enthusiasts report with their original HEI * Produces 67 percent more energy in the coil * Spark breakdown time (the amount of time until the spark plug has enough voltage to spark) is 45 percent faster, resulting in more accurate timing throughout the rpm range * Delivers twice the energy across the spark gap (during a one-millisecond burn time) * Spark duration and more energy to the spark allow wider plug gaps (.050 in.-.055 in.), increasing flame kernel growth These are dramatic improvements, not just because of a great module and coil, but also because they've been designed to work as a team to produce these results. Models and options are available for applications from the 1950s and up.
( 22 )
$383.00
—
$431.25
MSD Street Fire EFI Distributors
MSD Street Fire EFI distributors are ready to drop in your V8 engine and replace the worn-out OEM piece. They feature a factory-style ignition module, along with a durable new cap and rotor. The distributors use a cast housing, making them more affordable, but are much stronger than standard OEM distributors. The MSD Street Fire EFI distributors are available for both Ford and Chevy EFI engines.
( 26 )
$409.95
Engine Works RTR Distributors
Engine Works offers Ready-to-Run (RTR) race distributors for a wide range of applications—including many Chevrolet big block and small block V8 engines from 1955 and up. As the name implies, these drop-in replacement distributors include a built-in ignition module and connect by means of three wires (power, ground, and coil negative). They feature an aluminum housing, HEI (high energy ignition) in-cap coil, and your choice of cap colors. A very popular choice among street rod and muscle car owners!
Not Yet Reviewed
$272.46
FiTech Go-Spark Ready-To-Run Distributors
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$329.00
—
$380.00
Lingenfelter TRG-002 58x-24x Crank Sensor Trigger Conversion Modules
Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.
( 32 )
$303.99
MSD Street Fire HEI Distributors
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 290 )
$255.95
MSD Pro-Billet Locked-Out Distributors
MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.
( 32 )
$479.95
Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits
Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware
( 2 )
$448.99
FAST Dual-Sync Billet Distributors
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$429.95
—
$486.95
PerTronix Flame-Thrower Race HEI Distributors
Flame-Thrower Race HEI distributors from PerTronix produce 42 percent more energy in the coil, with 46 percent faster spark breakdown time. This allows 48 percent more peak current to reach the spark plug, compared to their Street/Strip HEI distributors. That's an enormous improvement over stock HEIs and most aftermarket HEI distributors. A specially designed vacuum lockout mechanism prevents timing adjustments that change rotor phasing, adversely affecting the burn time and efficient fuel combustion. The rotor plates are TIG-welded to the mechanical advance mechanism, preventing high-rpm distortion and improving mechanical reliability. Each distributor uses a new aluminum housing cast and is machined from a strong, but lightweight A384 alloy. They're supplied with a high-dielectric strength cap with solid brass terminals, a balanced rotor, and a low-resistance center coil brush. Also included are nylon rotor hold-down screws and a factory-installed, high performance mechanical curve kit with precision-machined weights and a center plate. A hardened, machined steel gear is standard, along with an electronic module and coil combination that excels in the 6,000 to 8,500 rpm range. These distributors are great for both Circle Track and drag race applications where factory-type HEI distributors are mandated.
( 9 )
$414.80
—
$463.10
PerTronix Flame-Thrower EST Distributors
Pertronix Flame-Thrower EST performance distributors for GM late model computer-controlled (EST) applications dramatically improve high-rpm performance. When used with their Flame-Thrower remote-mounted coil, voltage to the spark plugs is increased by more than 40 percent. These distributors are a direct bolt-in for most 1987-93 GM cars and 1987-95 trucks. Additional features and specifications include: * Housing is cast and machined from strong but light A384 alloy * Ignition modules are laser-trimmed for precise peak current control and use thick film technology for greater accuracy and improved reliability * High dielectric strength cap and rotor with solid brass terminals to prevent high-rpm arcing * Centerless-ground, corrosion-resistant shaft reduces friction and provides concentric operation * High-quality bronze sintered bushings are installed, aligned, and bored for accuracy and extended mileage use * A hardened steel distributor gear is machined to exact tolerances for a tighter mesh with the cam gear, eliminating horsepower losses caused by timing fluctuations found with excessive clearance and wear * Legal in all 50 states and Canada (CARB E.O. #D-57-13)
( 19 )
$303.40
