Availability
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
These MSD 8-Plus CD ignitions produce the same extreme output as the original 8-series, yet they are now in a smaller housing with improved efficiency and internal components. The new 8-Plus ignitions feature built-in, 2-step rev control. Now you can switch between two rev limits without extra wiring or housings. For those who are looking for a dual-fire MSD 8, the MSD 8-Plus CD ignitions are all that you need. MSD's engineers were able to deliver ignitions that are capable of firing two coils at once for those extreme racers using dual plug race setups.
( 3 )
$2,099.95
The FuelTech FTSPARK GEN II is an extremely high-energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing. It's developed for high-horsepower combinations and test-proven on 5,000+ horsepower engines! Compatible with any ECU on the market, this system is able to generate a spark with up to 750mJ (mJ=mili Joules) of energy—and is capable of firing the spark with 140 amps of current in the coil primary. With these features, FTSPARK generates a spark with approximately 5x more energy and 10x more current compared to a SparkPRO, ensuring a burn in any condition, especially in extremely rich air/fuel ratios. Models are available for 4-, 6-, or 8-coil applications. Technical description: * Programmable energy via CAN or digital input to adjust the energy level; - 475 V in the primary of the coil, which helps to prevent interference in the system * 140 amps of current in the primary of the coil with Racing CDI FuelTech coil for FTSPARK 750mJ * CAN communication with FuelTech PowerFT ECUs for diagnostic and datalogging * Automotive connector with gold-plated terminals * Serial bus (1 wire) allows the use of only one ECU output that triggers all ignition outputs (only with PowerFT) * Anodized aluminum and plastic case * Maximum working temperature: approximately 212 degrees F * Supply voltage for full power: 14-26 V. Minimum voltage for starting 8 V * Maximum operating frequency: 670 Hz * Compatible with other ECUs on the market. Check compatibility of your ECU with FuelTech tech support Contents of package: * One FTSPARK (GEN II750mJ or EXTREME) module * Installation and operation manual * Mounting hardware kit (4 rubber mounts, 8 washers and 8 nuts)
Not Yet Reviewed
$2,099.00
MSD took their original Pro Mag 12 distributors, added some new features to build performance, and subtracted 3 lbs. to help you get down the track faster. The results are the Pro Mag Lites. They utilize a magnetic pickup design with 16 rare earth magnets for rock-steady performance without recharging. They deliver 12 amps and 40,000 V worth of spark energy, feature built-in rev control that's good for up to 12,000 rpm, and use an all-billet housing for superior durability. They're compatible with MSD's crank trigger system.
Not Yet Reviewed
$2,599.95
—
$4,099.95
On Sale
Serious racers choose MSD Pro Mag 44--the mother of magnetos. With no magnets to recharge or points to replace, and an amazing 44 amps of primary current, it's no surprise that these magnetos are the choice of nitro-gulping top fuel racers! Pro Mag 44 magnetos are built with an assemblage of rare earth magnets and windings to produce incredible energy. They accurately trigger and distribute this energy on a precision path to your spark plugs, creating a burst of ground-shaking energy in your cylinders. And, for the absolute ultimate in ignition triggering, the Pro Mag 44s' design allows you to add optional accessories--a crank trigger, timing retard control, or even a rev limiter! Forget those weak, inaccurate points and adjustments. Get the most powerful, accurate magnetos with durability to match their performance--the MSD Pro Mag 44 magnetos.
Not Yet Reviewed
$4,099.95
$2,254.95
—
$4,199.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
