Availability
Showing In Stock Items. Show All 21 Items.
Summit Racing™ coil brackets offer easy universal mounting for standard size ignition coils up to 2 1/2 in. diameter. A special tab is provided for external condenser mounting, if required. For secure tightening, the brackets use a bolts and nuts instead of screws.
( 95 )
$10.99
—
$11.99
You've spent a lot of time putting together your performance ignition system. Protect it from the harsh vibrations of racing or off-roading with one of our Summit Racing™ vibration mount kits. The kits include four black rubber vibration mounts with hardware and are available in #10 or 1/4-20 in. thread sizes.Reduce vibration and increase ignition box life with Summit Racing™ vibration mount kits.
( 39 )
$11.99
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 60 )
$18.99
—
$25.99
These Summit Racing™ HEI advance curve kits are designed for use on all non-computerized GM type HEI distributors. The kits include two weights, a center plate, three sets of color-coded springs, nylon bushings, and a detailed instruction/setup manual.
( 58 )
$10.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 378 )
$19.99
—
$30.99
Summit Racing™ distributor advance kits will give your distributor a performance curve. Our kits include springs and advance limit bushings so you can match the advance curve to your particular application. Achieve the best combinations for the best performance with Summit Racing™ distributor advance kits. Order the model recommended for your engine or distributor application.
( 20 )
$13.99
Since you're installing that new distributor, you'll need Summit Racing™ hold down clamps. Dress up your engine compartment while securing your distributor. Made from top-quality materials, they're the perfect way to dress up your engine compartment.
( 105 )
$10.99
—
$12.99
Summit Racing™ vacuum advance canisters are direct replacements for the units in your Summit Racing™ billet distributor. These canisters are made from high-quality materials to ensure optimum performance.
( 22 )
$14.99
—
$23.99
Summit Racing™ YH and YT Series advance curve kits allow you to adjust the timing to your settings. They include six springs to adjust the advance curve of YH and YT-type Mallory distributors, and eight keys to change the amount of advance in the YH Mallory distributors. Control the advance in your distributor with Summit Racing™ YH and YT Series advance curve kit.
( 16 )
$23.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$19.99
—
$24.99
JR Race Car kill switches are mandatory for NHRA competition. These important safety devices are designed and engineered to allow the driver to shut off power to the engine and safely control the vehicle if a failure occurs with the primary switches on a Jr. Dragster car. Available in your choice of manual or electrical applications, both types of kill switches meet NHRA rule requirements.
( 2 )
$14.72
Looking for a good distributor cap? Look no further than our own high quality Summit Racing™ distributor caps. Molded from premium alkyd material, they have solid brass or aluminum contacts for reduced electrical resistance and increased reliability.
( 3 )
$19.99
—
$23.99
Summit Racing™ replacement distributor harnesses are designed to replace the wiring harness from your Summit Racing Street & Strip® Ready-to-Run billet distributors. They include pre-terminated ends for an easy installation.
Not Yet Reviewed
$13.99
Keep your vehicle's ignition system revved up and ready to go by replacing worn-out or damaged components with new ones—like our Summit Racing™ ignition box replacement harnesses. These high-quality ignition box harnesses allow you to make the right connections and facilitate an easy installation.
( 3 )
$11.99
—
$12.99
These Summit Racing™ HEI dust caps are a direct replacement for stock HEI distributor caps. Designed as a direct replacement, no modifications are necessary.
( 2 )
$13.99
Summit Racing™ distributor ignition pickups offer the quality, reliability, and durability you need. The trigger for your ignition system needs to be optimal for the best engine performance. These assemblies are compatible for use with a variety of Summit Racing™ distributor models.
( 1 )
$27.99
Outlaw Racing OEM-type kill switches are designed to be identical to your stock units. Wire splicing is eliminated by using the included wire plug-ins. Make your life easier and your install cleaner with the help of Outlaw Racing kill switches.
( 1 )
$10.99
—
$14.99
Fast HEI Distributor lockout kits allow you to lock the advance mechanism in your GM HEI distributor. By replacing parts designed for timing advancements as the engine speed increases on street cars, your racing engine (which spends little time at low rpms) will gain performance enhancement. Beat the competition with an assist from Fast HEI Distributor lockout kits.
( 8 )
$20.95
Eliminate the distributor advance on an HEI distributor with these lockout plates from Davis Unified Ignition. They are easy to install and the vacuum advance eliminators use the same mounting screws that secure the vacuum advance. These eliminators are recommended for racing applications only.
( 19 )
$11.75
Replace your worn-out cap and rotor with these distributor cap and rotor kits from Proform. High-output racing ignition systems place severe demands on distributor caps and rotors. High voltage, surges of spark current, and high temperatures all have the ability to turn your run-of-the-mill cap and rotor's molded parts into liquid. These affordable Proform distributor cap and rotor kits are up to the challenge. They are molded from premium alkyd material and have brass terminals.
( 5 )
$21.99
These FAST distributor caps are the best way to help out your ignition. The compression-molded FAST distributor caps are stress-relieved in special fixtures immediately after molding to help ensure dimensional stability. Keep your ignition firing cleanly and reliably with one of these FAST distributor caps.
( 5 )
$22.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
