Availability
Showing In Stock Items. Show All 45 Items.
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$162.40
—
$223.85
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1223 )
$218.99
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 10 )
$167.99
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$191.01
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 31 )
$200.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 618 )
$225.15
$123.95
—
$249.95
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$239.99
—
$243.99
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 799 )
$228.95
$114.95
—
$171.95
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 997 )
$114.70
—
$246.99
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 5 )
$149.95
Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.
( 164 )
$234.99
MSD sport compact coils are direct bolt-in replacements that intensify the spark output of your ignition, helping your air/fuel intake charge burn more completely. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring.
( 38 )
$125.95
American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.
( 21 )
$213.75
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$102.99
—
$323.99
Davis Unified Ignition SOS ignition coil packs feature advanced technology to pack more electrifying voltage into them for pure ignition performance. The SOS (Sultans of Spark) ignition coils are designed with increased windings to boost spark output up to 40,000 V! That is a 60 percent increase in spark energy over the 25,000 V produced by the stock ignition coils. The higher voltage, along with an increased spark duration, allows spark plug gaps to be opened up. The larger gap exposes a hotter spark in the combustion chamber for an increased burn of the fuel mixture, resulting in more horsepower and better fuel economy. Davis Unified Ignition SOS ignition coil packs also provide quicker starting, smoother idle, and excellent throttle response. They are direct replacements for the factory coil packs and do not require any special modifications for installation.
( 84 )
$179.00
—
$189.00
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$170.99
Crown Automotive distributors deliver accurate trigger signals. When it's time to improve your ignition system, you can rely on Crown for quality direct-fit replacement parts. These distributors are constructed of cast aluminum housings and steel gears, magnetic or points-style triggers, and most have caps included. Hook one up to deliver the voltage from your coil to the spark plugs for reliable ignition!
( 18 )
$102.99
—
$133.99
Ignition modules can eventually deteriorate and break down. Crown Automotive ignition modules will allow your car to once again ignite the fuel that allows your car to start and keep going. If you're experiencing power loss, overheating, or stalling due to failure, Crown parts are direct-fit components to discharge the spark that keeps you going.
( 2 )
$153.99
Superchips 3.6L V6 coil packs can yield impressive results when used to replace or upgrade your older, worn-out ignition coils. Designed for the 3.6L V6 engine found in thousands of Chrysler, Jeep, Dodge, and Ram vehicles, these coils improve cold starts and provide a smoother running engine. Available in six packs, or individual replacements, Superchips 3.6L V6 coil packs are a surefire way to put some new spark in your ride while adding some underhood flair! Other product features include: * Increased spark energy * Optimized cores and windings * Epoxy-filled housings * Simple bolt-on upgrade * Yellow housing for increased aesthetics.
( 3 )
$224.95
Davis Unified Ignition street/strip coil kits are capable of 7,000 rpm! The higher voltage output of these coil kits allows you to widen your spark plug gap up to .055 in. The wider plug gaps allow major spark energy into the combustion chamber for a better burn of the fuel mixture and increased horsepower. Due to the high-voltage output of the coils, a burn-through resistant brass terminal rotor is included, as well as nylon rotor screws to prevent misfires at extreme rpm. D.U.I. race coils are installed in your choice of colors, including a cool clear style so you can watch the sparks fly.
( 98 )
$105.99
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 2 )
$130.20
—
$159.60
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$104.99
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$152.95
Do you need more firepower? Davis Unified Ignition Jeep Firepower ignition kits have the components that you need to make your Jeep an energy machine! They start with the Screamin' Demon coil--the name says it all. These coils allow you to open up your spark plug gaps a whopping .065 in.! A larger gap means more spark in the combustion chamber, and that equates to a more complete burn of the fuel mixture, increasing horsepower, gas mileage, and keeping your plugs cleaner, too! And, you'll experience no drop in power when you hit the accelerator, like you do with notorious stock coils. To ensure that every ounce of this high-powered energy gets to your plugs, a set of LiveWires is included. The LiveWires are custom-fit, precut, and numbered at each end for the correct cylinder. They feature space-age, heat-resistant sleeving to handle extreme underhood temperatures. Some Jeep kits, depending on the application, include brass terminal caps and rotors as well. Give your ride the added power it was built to handle with Performance Distributors Jeep Firepower ignition kits.
( 8 )
$219.00
—
$249.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
