Selected Filters


Loading...

Availability


INTERNATIONAL M1200 Ignition Components

Part Groups

Results 1 - 24 of 27

On Sale

PerTronix Ignitor® Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor® lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor® has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems

4.71 out of 5 stars ( 211 )

$182.26


$164.03

On Sale

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.64 out of 5 stars ( 1036 )

$139.99

—

$157.01


$125.99

—

$141.31

On Sale

Proform Street/Strip HEI Distributors

Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.

4.09 out of 5 stars ( 185 )

$239.99

Summit Racing™ Distributor Cap and Rotor Kits

Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.

4.39 out of 5 stars ( 405 )

$32.99

—

$34.99

ACDelco Ignition Coils

Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.

4.71 out of 5 stars ( 38 )

$35.99

—

$52.99

MSD Distributor Cap and Rotor Kits

The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.

4.68 out of 5 stars ( 537 )

$57.29

ACDelco Gold Distributor Caps

ACDelco Gold distributor caps are a high-quality replacement for your vehicle's original component. They're manufactured to meet or exceed your expectations in fit, form and function. Order the model recommended for your application.

4.89 out of 5 stars ( 44 )

$24.99

MSD Street Fire Cap and Rotor Kits

Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.

4.75 out of 5 stars ( 142 )

$54.85

ACDelco Ignition Conversion Kits

Old ignitions systems become worn down and really impact the performance of your vehicle. ACDelco ignition conversion kits are not only designed to restore original performance, but also update your vehicle to a newer style ignition. With these newer ACDelco ignitions, you'll experience better throttle response, better fuel mileage, and have an overall better running engine. Each kit includes everything needed to update the ignition—such as modules, plates, and even the grommets. Check your specific application for items included for your vehicle.

Not Yet Reviewed

$256.99

Standard Motor Distributor Caps

Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.

4.42 out of 5 stars ( 123 )

$18.99

—

$26.99

On Sale

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.29 out of 5 stars ( 308 )

$199.29

—

$247.62


$179.36

—

$222.86

Standard Motor Ignition Coils

Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.

4.44 out of 5 stars ( 84 )

$33.97

Standard Motor Blue Streak Distributor Rotors

Standard Motor Blue Streak distributor rotors have solid brass segments for better conductivity and higher-voltage spark to the plugs. Exclusive designs and extra material thickness in "well area" provide added security against voltage punch-through. As a global manufacturer of OE ignition products, Standard Motor maintains complete quality control throughout the entire manufacturing process from the componentry to the finished product. Select the SMP Blue Streak distributor rotor designed for your application needs.

4.26 out of 5 stars ( 27 )

$7.99

ACDelco Distributor Condensers

ACDelco distributor condensers connect across the contact breaker points in the distributor and help provide a crisper spark at the plugs. They also retard erosion of the contact-breaker points for enhanced durability. The economical condensers are available in several models for fitment on thousands of vehicles. Order the unit recommended for your application.

4.82 out of 5 stars ( 11 )

$16.99

—

$24.99

ACDelco Distributor Rotors

ACDelco distributor rotors help restore ignition performance with the proper fit, form, and function for your vehicle. They feature high-quality materials and strict design requirements that match OE specifications—critical to ensuring an easy installation and dependable operation. These replacements are available in dozens of styles for virtually any vehicle on the road today. Order the distributor rotors recommended for your application.

4.58 out of 5 stars ( 31 )

$9.99

On Sale

PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger

4.58 out of 5 stars ( 33 )

$231.99


$208.79

ACDelco Gold Distributor Points

Breaker point ignition systems were, until the advent of electronic ignition systems, used on millions of engines. ACDelco Gold distributor points allow you to replace worn out points with premium aftermarket quality that offers the ideal fit and performance. Replace them with top quality materials from ACDelco Gold--so you know they'll fit and last.

3.69 out of 5 stars ( 13 )

$19.99

—

$35.99

Standard Motor Ignition Breaker Points

Is it time for a tuneup? Replace your distributor's worn-out breaker points with new ones from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement breaker points are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These inexpensive units are available for use in a wide variety of makes and models. Trust your vehicle's ignition system needs to Standard Motor Performance.

4.13 out of 5 stars ( 24 )

$17.99

—

$23.99

Standard Motor T-Series Ignition Coils

Standard Motor T-Series ignition coils are offered in a variety of styles to cover a wide range of vehicle applications. Each coil model is designed to exceed OEM specifications for accurate, maintenance-free operation. High-efficiency laminations optimize magnetic field build-up to produce high spark energy and reliable performance. Standard Motor T-Series DIS ignition coil terminals are steel or aluminum, as indicated by the original equipment. Select the Standard Motor coil ignition designed for your application needs.

4.56 out of 5 stars ( 16 )

$25.99

Standard Motor Electronic Ignition Conversion Kits

Standard Motor electronic ignition conversion kits are designed to replace outdated mechanical breaker points and condensers in classic vehicles with modern, maintenance-free electronic ignition systems. These kits enhance ignition timing accuracy, improve overall engine performance, and eliminate routine adjustments, helping restore dependable starts and smoother operation. Manufactured under strict quality-control standards and built to meet or exceed original equipment specifications, they deliver long-lasting durability and trusted performance for a wide range of vintage applications.

Not Yet Reviewed

$253.99

Standard Motor Distributor Rotors

Is it time for a tuneup? Replace your distributor's worn-out rotor with a new one from Standard Motor Products. Don't take chances with old, questionable, or faulty ignition components that can leave you stranded. Standard Motor Products replacement distributor rotors are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to Standard Motor Performance.

4.45 out of 5 stars ( 51 )

$6.99

—

$11.99

Standard Motor Ignition System Condensers

Don't take chances with an old, questionable, or malfunctioning condenser that can leave you stranded. Standard Motor Products replacement ignition condensers are designed to exceed OEM specifications for reliable, maintenance-free operation. Trust your vehicle's ignition and electrical system needs to Standard Motor Performance.

4.44 out of 5 stars ( 18 )

$5.99

—

$20.99

Standard Motor T-Series Distributor Rotors

Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor rotors are made of durable phenolic plastic or high-grade polyester with a stainless steel spring and designed for dependable service. When it's time for a tuneup choose the value and quality of Standard's T-Series components to service your vehicle.

5.0 out of 5 stars ( 2 )

$3.99

Standard Motor Ignition Coil Brackets

Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.

Not Yet Reviewed

$7.99