Selected Filters


Loading...

Availability


HARLEY-DAVIDSON FLH ELECTRA GLIDE Ignition Components

Part Groups

Results 1 - 24 of 26

Dynatek 2000i Ignitions

Dynatek 2000i ignitions are the most sophisticated and capable aftermarket ignitions available for Harley-Davidson®. These systems replace the stock Hall effect pickup found on late model bikes. They are microcomputer-controlled, producing accurate command over the entire ignition process, with eight selectable advance curves. They're not to be used with metal core plug wires. They are highly adjustable and easy to install. Your Harley® will run better than new.

5.0 out of 5 stars ( 3 )

$279.99

Dynatek Dyna Dual S Ignitions

Dynatek Dyna Dual S ignitions replace stock type ignition systems which are self-contained and fit under the stock timer cover. Dynatek Dyna Dual S ignitions unique hall-effect sensors are impervious to dirt and oil and spark scatter is almost eliminated. Dual S ignitions changes timing less than 3 degrees from 0-8,000 rpm and eliminates maintenance and extends spark plug life.

Not Yet Reviewed

$149.99

S&S Cycle Hi-4N Ignitions

S&S Cycle Hi-4N ignitions are one-piece machined aluminum housings that reduce vibration and improve heat dissipation and reliability. Features: * Improved kick-start algorithm designed to start as easily as points * BCD switches with solid detent * Legible markings allow easy and repeatable adjustments of mode, advance rate, and rev limit * Single-fire and dual-fire function built into a single module * Flexible wiring harness makes installation easier

Not Yet Reviewed

$411.95

—

$539.96

Daytona Twin Tec VT-I Ignition Systems

The Daytona Twin Tec VT-I ignition systems include a special trigger rotor for use with a traditional mechanical advance mechanism. Then, a Hall Effect sensor detects the teeth on this special trigger rotor and provides very stable spark timing. A rotary switch is used for a precise, digital RPM limiter that can be set from 5,200 to 7,000 rpm in 200 rpm increments. This system also has a red status LED that allows easy static timing. The VT-I is compatible with most original equipment and aftermarket dual fire ignition coils and has a simple 2- wire hookup to the coil. Electronic dwell control provides maximum ignition energy at high RPM—and reduced current draw at low RPM. The unit operates down to below 6 V for reliable starting under all conditions, including kick start. VT-I utilizes fully encapsulated construction with surface-mount electronics. The unit is waterproof and highly resistant to vibration and shock. Electronic components also include over-temperature protection and are rated to operate up to 260 degrees F (125 degrees C).

Not Yet Reviewed

$262.95

Dynatek Twin Fire II Mini Coils

When your motorcycle needs optimum performance from a small package, you'll want Dynatek Twin Fire II mini coils. Their primary and high-voltage terminals are machined from brass, they use high-impact thermoplastic housings, and their compact size easily fits on the bike. These mini coils accept 7 to 8.8mm wires, have a peak gap current over 50mA, and conduct over 40,000 V output. They are only usable with internal dwell control ignitions. Dynatek Twin Fire II mini coils incorporate two individual performance ignition coils into one easy-to-mount package.

Not Yet Reviewed

$179.99

Mallory Motorcycle E-Spark Distributors

Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with Mallory E-Spark distributors. With E-Spark distributors, you'll have faster, easier starting with drop-in installation and without any engine disassembly when used with stock cylinders and heads. These machined billet aluminum E-Spark distributors have a fully adjustable mechanical advance and can be used with kick-start applications. Update your ride and enjoy the benefits of these E-Spark distributors from Mallory.

Not Yet Reviewed

$779.95

Twin Power Ignition Coils

If you want to increase peak spark voltage on your Harley-Davidson® by 20 percent or more, you need Twin Power ignition coils. These coils have a late OEM-style molded case and are high-quality, high-voltage replacements. They're designed for 12 V Harley® ignition systems—and will improve starting, prevent high-speed misfires, and increase mileage and performance. Twin Power ignition coils may come in OEM-style cases, but it's what's inside that counts.

5.0 out of 5 stars ( 1 )

$99.99

—

$109.99

ACCEL Motorcycle Mallory Electronic Advance Distributors

Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with ACCEL Mallory electronic advance distributors. With these electronic advance distributors, you have the option of running either single or dual fire mode with the appropriate coil and 14 preset advance curves to cover stock to high-compression engines. The modules also feature on-board rev limiting, an LED for easy static timing, and will work with or without VOES input. These Mallory distributors from ACCEL have a machined aluminum housing offering superior heat sink capabilities. They can be installed without the removal of stock heads and barrels. Update your ride and enjoy the benefits of these ACCEL Mallory electronic advance distributors.

Not Yet Reviewed

$1,171.95

On Sale

ACCEL Motorcycle Dual-Fire Super Coils

ACCEL Motorcycle's Dual-Fire Super Coils are designed to deliver the maximum amount of spark energy, faster rise times, and most importantly, 45 percent higher voltage to the plugs than the OEM coils. They are designed to mount in most stock locations and will fit under most OEM and aftermarket coil covers. Two available models cover both point-triggered and modern electronic ignitions.

Not Yet Reviewed

$223.95


$129.95

—

$231.95

Dynatek Dual Output Performance Replacement Coils

When you need a coil that can be placed in tight spots, get Dynatek dual output performance replacement coils. These 30,000-plus V output coils are a measly 4.2 in x 2.3 in. x 1.6 in. These 12 V dual tower coils are top-quality and will keep you going on the street or strip. Use the coils with 5.0 ohms primary resistance for street use, and 3.0 ohms primary resistance for racing applications. When you need great spark but have little room for mounting it, get Dynatek dual output performance replacement coils.

Not Yet Reviewed

$129.99

ACCEL Motorcycle Performance Tune-Up Kits

With motorcycle performance tune-up kits from ACCEL, your Harley® will run at peak ignition performance. These tune-up kits feature ACCEL's 32 oz. points and premium condensers that have been tested to provide your bike with reliable service and operation. Keep your Harley® healthy with performance tune-up kits from the doctors at ACCEL.

Not Yet Reviewed

$56.25

On Sale

ACCEL Motorcycle Single Fire Super Coils

ACCEL Motorcycle's Single Fire Super coils deliver all of the great features of their dual fire brothers, like a faster rise time, higher voltage, and maximum energy to the spark plug. They're available in a choice of finishes.

4.11 out of 5 stars ( 9 )

$217.95

—

$249.95


$114.95

—

$124.95

Dynatek Dyna 2KI Programmable Ignitions

Dyna 2Ki Programmable Ignitions not only add to, but extend, many features of the Dyna 2000 modules with a completely new design that fits under the cam cover. Every time power to the ignition is switched on, the 2Ki checks to see if the coil is shorted, mis-wired, or of the wrong type. If an error is detected, the 2Ki will immediately switch off and issue a warning. After starting, the 2Ki continuously monitors the status of the coil and wiring. All 2Ki ignitions are PC programmable: * 8-point fully-definable wide-open throttle curve * 8-point fully-definable part-throttle curve * Rev limit programmable in 50 rpm steps * Programmable dead cranking revs 0-10 * Programmable rear cylinder offset, total of +/- 10 degrees Data recording functions: * Total engine hours * Time at wide-open throttle * Number of engine starts * Longest time operating at wide-open throttle * Maximum rpm * Seconds near rev limit * Statistical analysis of time at rpm Additional features and benefits include: * Single-fire operation down to zero rpm for easier cranking and kicking * Operates in all combinations of single-fire or dual-fire with single plug or dual plug heads (when used with appropriate coils) * Eight advance curves to cover a broad range of engine builds and riding styles * Over-rev protection adjustable from 6000 to 7500 rpm * Adjustable timing retard for nitrous and turbo applications * VOES indicator; shows the status of the VOES switch, also indicates when retard mode is active * Built-in tach driver delivers stable tach signal even during rev limiting; can be used to activate shift lights, auto shifters, and other accessories * Easy static timing with built-in timing indicator (no timing light required) * Intelligent over-current and short circuit protection * Active dwell control continually adjusts coil current to maintain maximum spark energy up to redline while eliminating coil stress caused by overcharging at idle * High-efficiency design reduces battery draw for easier cold weather starting and lower charging system load * Ruggedized output--cannot be damaged by broken or disconnected spark plug wires * Over-voltage protected against momentary spikes (positive and negative) as well as surges caused by faulty voltage regulators or quick-charge battery boosters * Harness constructed with TXL cross-linked polyethylene automotive wire for exceptional resistance to abrasion, heat, and chemical attack * High-temp glass-braid jacket further increases the toughness of the harness and provides a tight, clean appearance * Wire colors closely match the factory harness for error-free installation * Manufactured with premium-quality components designed for operation in a high-temperature, high-vibration environment * One-piece aluminum housing and thermally-conductive epoxy encapsulation provide superior heat dissipation and outstanding shock, vibration, and moisture resistance * Advanced microprocessor technology * Quartz crystal accuracy.

5.0 out of 5 stars ( 1 )

$437.99

Daytona Twin Tec High Output Single Fire Coils

Single fire ignitions eliminate many Harley® backfire problems and enhance idle quality. Daytona Twin Tec high output single fire coils use separate coil windings to fire each spark plug independently, only on the compression stroke. Conversion of older carbureted Harley-Davidson® engines to single fire is highly recommended—there is no downside. Daytona Twin Tec single fire coils install easily. For most applications they fit stock brackets and covers. They are compatible with Daytona Twin Tec and most aftermarket ignitions.

Not Yet Reviewed

$116.99

Twin Power High Performance Coils

When you're running high rpm, you need parts like Twin Power high performance coils that are built to keep up with you. They use special heat-resistant construction, molded epoxy coils, and deliver 35,000 V per outlet. They're for 12 V H-D ignition systems and will improve starting, stop high-speed misfires, and increase mileage and performance. If heat from high rpm has your coil seeing red, replace it with Twin Power high performance coils.

4.0 out of 5 stars ( 1 )

$111.99

Dynatek Dyna S Ignition and Coil Kits

Simplify your ignition, toss your points, and put one of these Dynatek Dyna S ignition and coil kits in your Harley®. Accurate timing and ease of maintenance make these kits a favorite of record-setting top road and drag racers. Replace your points and condensers with these high performance ignition kits. The DYNA S kits are completely contained ignition systems, are housed behind your ignition cover, and use a magnetic rotor with the original spark advancer, so that the factory advance curve is maintained. These are complete kits, with nothing more to purchase, and they come with complete and comprehensive instructions. Get rid of your point setup and join the Dynatek team.

5.0 out of 5 stars ( 1 )

$359.99

Dynatek 2000 Digital HD2 Ignition Systems

Dynatek 2000 digital HD2 ignition systems have become the standard for performance and versatility in aftermarket ignitions. These new modules include expanded advance curve functionality, with the option to use vacuum advance compensation. The new modules also include a special retard mode for use with turbocharged and nitrous bikes. They allow you to tailor the advance curve and rev limiter with four built-in advance curves and four independent rev limiter choices from 6,000 to 7,500 rpm. They are stock factory pick-ups and simply plug into the existing factory wiring harness on 1991-98 model bikes. An extension harness is available for installing the Dyna 2000 on 1990 and earlier bikes.

Not Yet Reviewed

$289.99

Dynatek 2000 Digital HD1 Ignition Systems

Dynatek 2000 digital HD1 ignition systems have become the standard for performance and versatility in aftermarket ignitions. These new modules include expanded advance curve functionality, with the option to use vacuum advance compensation. The new modules also include a special retard mode for use with turbocharged and nitrous bikes. They allow you to tailor the advance curve and rev limiter with four built-in advance curves and four independent rev limiter choices from 6,000 to 7,500 rpm and the new retard mode allows for a selection of ignition retard of 5, 7, or 10 degrees upon activation of retard input. They're stock factory pick-ups and simply plug into the existing factory wiring harness on 1991-98 model bikes. An extension harness is available for installing the Dyna 2000s on 1990 and earlier bikes.

Not Yet Reviewed

$289.99

ACCEL Motorcycle Power Pulse Coils

Molded in impact-resistant thermoplastic, these ACCEL Motorcycle Power Pulse coils feature everything that your V-Twin needs from a coil. They offer higher spark voltage, faster rise time, and longer spark duration.

Not Yet Reviewed

$199.95

—

$238.95

Daytona Twin Tec Distributor Rotors

Daytona Twin Tec distributor rotors are the perfect replacement part for an ideal tune-up. Their high-quality materials will give your machine the extra get-up-and-go that you crave. Daytona Twin Tec stays highly focused on providing advanced technology solutions for your Harley®, including these distributor rotors.

5.0 out of 5 stars ( 1 )

$13.95

Biker's Choice Coil Covers

Biker's Choice coil covers are designed to cover the OEM coils on a variety of Harley-Davidson® Big Twin models. They are available in black or brilliant chrome finishes to match the style of your bike.

Not Yet Reviewed

$29.99

—

$33.99

Dynatek Single Output Performance Replacement Coils

Dynatek single output performance replacement coils combine high-tech and quality design for maximum performance. They produce excellent spark energies and over 30,000 V output. It is recommended to use these coils with 5.0 ohms primary resistance for street use, and 3.0 ohms primary resistance for racing applications.

Not Yet Reviewed

$219.99

ACCEL Motorcycle Super Single Fire Ignition Systems

Now you can have a balanced performance ignition system that is designed to make the most horsepower without mixing and matching components. ACCEL Motorcycle Super Single Fire ignition systems are complete bolt-on systems that are designed to work together to produce an adjustable ignition that outperforms others. Each Super System includes the adjustable ignition module, a Single Fire Super Coil, ACCEL high performance U-groove spark plugs, and ACCEL black 8.8 performance spark plug wires. These systems are easily installed and simply adjusted with switches on the module to produce the performance to match your machine.

Not Yet Reviewed

$999.95

Twin Power Mini Ignition Coils

Twin Power mini ignition coils are OEM-style molded epoxy. They mount like stock and save space. They will increase peak spark voltage, mileage, and overall performance, improve starting, and stop high-speed misfires.

Not Yet Reviewed

$99.99