Availability
Showing In Stock Items. Show All 61 Items.
Mopar and Hemi mean a lot to car guys--they embody power and classic design. Summit Racing™ Mopar Hemi coil-on-plug ignition coils are a great way to match well-engineered engines with the pure power of plasma. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind to provide 20 percent more voltage and 30 percent more spark energy (mj) over stock. All this comes from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you are running a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn!
( 14 )
$59.99
—
$479.92
RIPP Superchargers high performance coil packs are guaranteed to be an improvement over those old weak, crusty factory coil packs. Direct swaps for 3.6 Mopar cars, trucks, and Jeeps, these coils deliver a more powerful spark, resulting in more complete combustion and greatly improving high-rpm operation. Plus, they feature Mopar orange high-temperature outer housings. With RIPP high performance coil packs you can improve performance and gas mileage without breaking the bank. Features and benefits include: * 100 percent compatible with supercharged and non-supercharged engines * 100 percent bolt-on installation—no modifications necessary * 10 percent more power than OEM coil packs * Direct swap—plug-and-play * Improved throttle response * Improved mpg
( 53 )
$482.46
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 621 )
$732.95
$78.55
—
$699.95
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 372 )
$31.99
Davis Unified Ignition SOS ignition coil packs feature advanced technology to pack more electrifying voltage into them for pure ignition performance. The SOS (Sultans of Spark) ignition coils are designed with increased windings to boost spark output up to 40,000 V! That is a 60 percent increase in spark energy over the 25,000 V produced by the stock ignition coils. The higher voltage, along with an increased spark duration, allows spark plug gaps to be opened up. The larger gap exposes a hotter spark in the combustion chamber for an increased burn of the fuel mixture, resulting in more horsepower and better fuel economy. Davis Unified Ignition SOS ignition coil packs also provide quicker starting, smoother idle, and excellent throttle response. They are direct replacements for the factory coil packs and do not require any special modifications for installation.
( 84 )
$52.99
—
$529.00
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 17 )
$99.95
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 151 )
$70.98
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 640 )
$401.95
—
$499.95
$301.95
—
$324.95
Holley Hemi V8 ignition coil adapter harnesses let you take charge of your engine by controlling both fuel and spark. They are built to fit and function with the factory harness. The harnesses feature TXL-grade copper wiring with minimal weight, plus high-temperature sleeves in a small diameter. Factory-style terminations provide a strong, secure connection.
( 1 )
$187.95
—
$199.95
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 92 )
$43.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 369 )
$41.99
—
$48.99
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$86.10
—
$580.65
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$36.97
—
$61.97
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$15.23
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
$178.95
—
$249.95
On Sale
ACCEL Mopar Remote Super Coil and harness combos provide increased performance for Dodge trucks and Jeeps that utilize the light gray Yazaki coil connector. You get quicker starts, improved idle, crisp throttle response, and higher top-end power. These coil and harness combos are compatible with Mopar J-TEC computer-controlled ignitions, and require no modifications for installation.
( 31 )
$117.37
$88.03
On Sale
ACCEL ignition coil adapter harnesses will allow you to connect the coil to the factory wiring harness. The ACCEL ignition coil adapter harnesses include the necessary connectors for a quick and easy installation.
( 43 )
$38.52
$28.89
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$93.99
—
$94.99
On Sale
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$32.87
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$79.99
Summit Racing™ ignition coil wiring harnesses can facilitate a hassle-free connection of the coil to the wiring harness. That means no more cutting or splicing wires! These adapter harnesses are made from quality material for lasting durability—and they include all the necessary connectors to provide a fast, effortless installation. Order the model recommended for your application.
( 12 )
$23.99
On Sale
ACCEL distributor rotors are the perfect replacements for stock rotors to help ignition systems fire reliably. ACCEL distributor rotors feature high conductivity, corrosion-resistant brass terminals, and stainless steel rotor springs for unrestricted spark energy flow. Pick up a new ACCEL distributor rotor and make your distributor happy.
( 20 )
$19.70
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
