Filters
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series distributor rotors are made of durable phenolic plastic or high-grade polyester with a stainless steel spring and designed for dependable service. When it's time for a tuneup choose the value and quality of Standard's T-Series components to service your vehicle.
( 2 )
$11.99
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 77 )
$67.99
—
$80.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 97 )
$220.99
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 111 )
$19.99
Ignition coils are a central component of the ignition system. They transmit a high voltage to the spark plugs where a spark is produced that ignites the mixture. Hella ignition coils are available in more than 300 styles to cover a wide range of vehicle applications. With their manufacturing process, materials used, number of winding strands, and high-temperature resistance, Hella coils guarantee ignition even under extreme conditions and electromagnetic compatibility with the magnetic field-sensitive elements of vehicle electronics (ECE R10). Whether an ignition coil strip, candle shaft ignition coil, block ignition coil, or an ignition coil for installation with ignition distributor, Hella premium ignition coils will provide the energy to spark increased performance for your vehicle.
Not Yet Reviewed
$46.99
Replace your cracked or worn factory coil-on-plug boots with these from Beck/Arnley! Beck/Arnley COP boots are direct replacements for the factory pieces. These coil-on-plug boots are specifically designed for your application, so you can be confident of a correct fit. Beck/Arnley coil-on-plug boots keep moisture away from your coil wells to prevent corrosion.
Not Yet Reviewed
$14.99
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 192 )
$315.99
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 79 )
$38.99
—
$49.99
Is it time for a tuneup? Replace your distributor's worn-out rotor with a new one from Standard Motor Products. Don't take chances with old, questionable, or faulty ignition components that can leave you stranded. Standard Motor Products replacement distributor rotors are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 44 )
$8.99
Beck/Arnley ignition coils are high-quality replacements, available in styles such as coil pack, E-core, canister, and C-core. These OE-type direct-fit coils will deliver the spark your engine needs to run efficiently. Order the model designed for your vehicle application.
( 9 )
$66.99
Any time that your spark plugs or coils are serviced or become contaminated with oil, water, or coolant, the boots should be replaced. Standard Motor coil-on-plug boots are manufactured from high-temperature silicone rubber to provide great protection from thermal overload. The boots' one-piece molded design helps to protect plugs against moisture and other undesirable contaminants. When OE fails, you know you can trust Standard!
( 6 )
$39.99
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 55 )
$52.99
—
$213.99
MotoRad ignition coils are engineered to maximize spark voltage duration for optimal engine performance. They're designed to perform under severe operating conditions and protect against extreme heat. All coils meet or exceed OEM specifications. Order the replacement ignition coils recommended for your vehicle. Additional product details: * Heat-resistant magnet produces max voltage output at all engine speeds * Graphite-infused platinum connections resist corrosion and offer superior conductivity and durability * Primary and secondary windings made with ETP-grade copper provide superior temperature protection and voltage conductivity * Pre-applied dielectric grease for easy installation
Not Yet Reviewed
$88.99
NGK coil on plug boots are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. Each coil over plug boot is constructed from durable materials that are resistant to corrosion and abrasion. These coil on plug boots are easily installed, ensuring longevity and durability of your spark plug energy. Fitments are available for dozens of makes and models.
( 3 )
$8.99
ACDelco GM Genuine Parts ignition coils are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. They increase electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery's charge, and provides power to the electrical accessories while the engine is running. GM Genuine Parts ignition coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
( 7 )
$82.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
