Availability
Showing In Stock Items. Show All 31 Items.
Replace your stock LT1 Optispark distributor with our all-new Summit Racing™ LT1 Optispark I or II distributors. These distributors feature an aluminum housing with heavy-duty oilite bushings, and a glass-reinforced cap with high dielectric strength and aluminum terminals.
( 123 )
$240.99
—
$261.99
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
The little devil in you will enjoy tormenting the competition with Davis Unified Ignition extreme Screamin' Demon coils. They allow you to widen your plug gaps up to a whopping .065 in. You get an intense spark through the entire rpm range to keep you "screaming" down the road without a loss of power. And your spark plugs stay cleaner longer! The brass terminals of these coils are more conductive than stock aluminum and resist corrosion longer, too. Demon coils are hot stuff and you'll need a better-than-stock set of wires to deliver that hotter spark to your plugs. So, turn up the heat on performance with Screamin' Demon coils from Performance Distributors.
( 213 )
$84.99
Summit Bucks
ACDelco Gold ignition control modules are a high-quality replacement for many vehicles on the road today. They increase the voltage in order for the spark plugs to ignite the air/fuel mixture. The modules feature electronically welded lead connections to help reduce heat stress, failure, or cold joints; and they've been laser-trimmed to provide precise values and reduce deterioration and damage. Gold ignition modules include a copper slug heat sink to help dissipate heat and create a more stable environment. They also feature a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. Order the model recommended for your application.
( 11 )
$134.99
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$274.95
—
$299.95
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 370 )
$27.99
—
$51.99
You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.
( 8 )
$399.75
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 641 )
$71.75
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 376 )
$79.99
—
$128.99
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 127 )
$74.99
—
$112.50
Summit Bucks
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 26 )
$47.99
—
$104.99
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
$65.08
—
$86.95
ZZPerformance offers high-voltage coil packs for a wide range of vehicles—including many Chevrolet, Cadillac, Pontiac, Buick, and Oldsmobile models from the early 1990s and up. The coil packs are available in different styles for various applications. Here are further details: * Model HVCP-14T: Upgrade your Volt/ELR ignition coil for improved performance and economy! The GM Voltec platform was designed around it's battery/hybrid system, but the internal combustion system was a budget solution—and the factory coil does not maximize the performance and efficiency of your engine. ZZP's high-voltage coil pack has improved core material, tighter coil winding, and higher voltage. No ECU calibration needed. * Model HVCP-38V2: These high-voltage coil packs will supply a stronger spark, which allows you to run a larger gap that will improve fuel economy, drivability, and HP capability. Not an earth-shattering difference but a small gain. Definitely well worth the upgrade if you're replacing your coils. --- Torque spec: 25 inch pounds --- No returns on electrical items. --- Sold in a set of 3. --- These fit GM 3800 W-Body and H-Body cars, including L67, L36, L32, and L26 * Model HVCPLSSQ8: After the resounding success of ZZP's round-style LSx ignition coils, ZZP now offers this square style. These coils produce on average 15 percent more spark—and have dyno-tested "before and after" results netting 4 to 5 whp gains on a naturally aspirated LS vehicle. Turbocharged and supercharged vehicles have netted 10+ whp gains and 15+ percent more spark than stock. Very impressive numbers for coils, better than OEM! This set of 8 coils will fit in place of the stock coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy ignition. The increased spark energy and voltage help improve the combustion process of the fuel mixture to create a more efficient burn. This results in improved throttle response, smooth idle, and quick starts, plus increased high-RPM performance! The coil packs also work fine for totally factory/stock vehicles. Fits 4.8, 5.3, 6.0, 6.2 and 7.0L. (Note: There are many variations of LS coils even within the same make and model year, so please check your vehicle to see if you have the square style. These replacements will not fit vehicles with the round style coil. The connectors and the way they mount are different, so you have to verify they look like the ones pictured.)
( 7 )
$109.99
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 15 )
$104.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 76 )
$32.99
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
$71.60
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 15 )
$20.00
$18.00
Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.
( 78 )
$30.99
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$90.05
$67.54
—
$126.95
Pico connector pigtails can help to eliminate the unnecessary cutting and splicing of wires. They're available in a variety of styles, designs, and configurations to fit many electric-related harnesses on the engine, lighting, electrical, or ignition systems. No more messy connections or wires running all over the place—Pico wiring pigtails provide easy, clean replacements for your damaged or faulty OEM connectors.
( 156 )
$5.99
On Sale
Standard Motor ignition coil brackets are direct replacement of the original equipment brackets to deliver the ideal fit and function to restore support of your ignition coil. The brackets are manufactured from quality materials and are designed to keep your ignition coils securely in place. Select the ignition coil bracket model that is better suited to your application needs.
Not Yet Reviewed
$7.99
$7.19
Is it time for a tuneup? Replace your distributor's worn-out cap with a new one from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement distributor caps are designed to exceed OEM specifications for dependable, maintenance-free operation. Order the model designed for your specific vehicle application.
( 112 )
$236.99
Moroso ProCoil F ignition coils are direct-fit replacements for the stock coils on a wide range of GM products, but with several big differences. They have large-diameter primary windings, extra-fine secondary windings, and a special M36 magnetic-steel core that combine to produce a much hotter spark, for better efficiency and power. They also have a durable alkyd case that resists carbon tracking, dual-layer insulation, and OE-style terminals for simple, plug-in wiring installation.
( 1 )
$65.99
Improve your times on the quarter-mile with JMS Chip PowerMAX SparkMAX ignition system voltage boosters. Utilizing a traditional or coil-on-plug ignition system, they'll give you increased spark and the highest continuous voltage and amperage output without noise. The kits are shipped complete with everything you need for installation and are designed to be activated at wide-open throttle. Kits include: * PowerMAX device * Heavy-duty, OEM-grade wiring harness * User-adjustable Hobbs pressure switch * 1/8 in. NPT adapter fitting * Wiring terminals * Wire splices and heat shrink * Solder, vacuum line, and tees * Mounting hardware * 40 amp fuses
( 2 )
$419.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
