Availability
Showing In Stock Items. Show All 33 Items.
Tanks Inc. fuel pump safety switch and relay wiring kits are helpful when you're switching to an electric pump on a carbureted engine. Proper wiring is crucial to the performance and longevity of your fuel pump. Make sure that your fuel pump is receiving full voltage from the battery with this heavy-duty kit. It will provide a continuous supply of voltage to prevent drop-off that's common with OE wiring—which will protect your fuel pump from damage. Additionally these FPSSK kits feature an oil pressure safety switch to turn off the fuel pump in the event of oil pressure loss. Without a safety switch your fuel pump will continue to run, even if a fuel line comes loose or in the case of an accident. Once oil pressure is lost, this kit will turn off the power to the pump. Included with the Model FPSSK kit: * 50 amp relay with socket and pigtail * 30 amp circuit breaker * 15 ft. of 12-gauge fuel pump power wire * 5 ft. of 12-gauge relay power wire * 5 ft. of 14-gauge relay ground and trigger wire * 10 ft. of 16-gauge starter wire * 10 ft. of 16-gauge ignition wire * 1/8 in. NPT male to 1/8 in. NPT female brass tee fitting * 3-prong oil pressure safety switch * Includes terminals and mounting hardware
( 4 )
$69.99
Mr. Gasket fuel pump safety switches are designed to shut off your electric fuel pump when the oil pressure drops below 15 psi. They are easy to install into the oil pressure sending unit, and will work with all 12 V systems.
( 6 )
$41.64
Dorman engine oil accumulator solenoid valves are made from durable materials for reliable performance. Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. These Dorman oil pump flow control valves are quality replacements for a clogged or damaged original equipment control valve and are an excellent value compared to the original equipment part.
Not Yet Reviewed
$57.19
Carter oil pressure safety switches shut down your engine when your oil pressure drops below 7 psi, saving your engine from damage. These switches come with complete instructions and a wiring diagram.
( 41 )
$30.99
VDO oil pressure safety switches are designed to sense when oil pressure drops below a specific minimum pressure—and shut-off the fuel pump for precaution. The heavy-duty replacement switches are available in a variety of pressure ranges. Select the model best suited for your application.
Not Yet Reviewed
$21.79
—
$54.99
The 6001Z series from Auto Rod Controls is the latest in control module innovation from ARC! Based on ARC's exclusive flat touch technology this new system is packed with new features that racers not only want but need in an electrical system. This new system incorporates a built-in system kill switch like some of our other units, but to keep the size of the unit down we developed multi-function switches. The water pump and fan are on the same switch. Touch the switch once to turn the water pump on and touch it again to turn on the water pump and the fan. The water pump and fan have separate relays but share one switch. The same holds true for the taillight switch, one touch turns the taillights on the second touch turns out the taillights and turns on the new built in interior lighting which is available in blue or white. Other innovations include ARC's exclusive oil pressure control. The system with monitor the oil pressure through a user chosen pressure switch and if the oil pressure falls below the switch setting it will automatically turn the ignition off. ARC also incorporated a neutral safety into the relay board. Simply connect the supplied wires from the relay board to the neutral safety switch and you are done. The car will not start unless the shifter in in a proper location for starting. This system also has a firewall bump start switch circuit built in. Simply run a supplied wire from the relay board to the bump start switch and ground the switch and your bump start switches are ready for use. These will also work through the neutral safety switch for complete safety. ARC's 6001Z series control modules include printed wire for the car and a user activated ground trigger relay for any use. We also included a dedicated 5-amp data logger circuit which will stay on for 6 seconds after shutting off the ignition to allow for processing. Rounding out this system are 2 30 amp fused power take offs for any use. ARC also includes LED's at every output on the relay board to quickly see if there is power leaving the relay board to the accessory connected to it.
Not Yet Reviewed
$872.99
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 26 )
$899.99
These Longacre Racing fuel pressure safety switches are designed to shut off the ignition or fuel pump when oil pressure drops below a certain psi. This helps to prevent engine damage and fire and keeps the motor from starting until the oil pressure is up.
( 2 )
$19.99
—
$39.99
It's always a good idea to place a safety switch in the circuit when installing an electric fuel pump. Holley safety fuel pressure switches will ensure the electric pump will not work unless the engine has oil pressure. It will prevent the pump from running in a situation where the motor may stall with the ignition on. Wiring the switch through the starter solenoid circuit energizes the pump on engine start-up. After the engine is running, the switch continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
( 18 )
$53.49
Painless Performance C.S.I. universal weatherproof engine harnesses provide wiring to accommodate the charging, starting, and ignition of just about any non-fuel injected engine. The C.S.I. is the Painless solution to repairing damaged wiring on your carbureted engine or for cleaning up the clutter and taking the guesswork away from those swapping from fuel injection to a carburetor. They also work great as an engine dyno harness. Accessory circuits aid in re-connecting a factory fuse block, electric fuel pump, electric water pump, electric cooling fans, light switch, etc. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 switched B+ * Accessory #2 constant B+ * Accessory #3 unfused constant B+ * Charging * Electric choke * Ignition * Oil gauge * Starting * Tachometer * Temperature gauge * Voltmeter
( 2 )
$184.99
Painless Performance 21-circuit 1967-77 direct-fit Ford F-Series harnesses are the perfect upgrade for your Ford truck. They use many of the factory connections and are already pre-terminated. Each harness features a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories, such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Accessory/cigarette lighter * Backup lights * Brake lights * Cargo Lamp * Charging * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers and washer pump
( 9 )
$774.99
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$5.99
—
$57.99
Painless Performance 28-circuit universal harnesses include most of the power accessory circuits you have been looking to add to your vehicle. The versatility of these harnesses will allow them to be easily adapted to almost any vehicle. The GM column-mounted harnesses include ignition switch plugs and turn signal switch plugs, pre-terminated and ready to install. They also have pre-wired plugs for the headlights and dimmer switch. The dash mounted units do not include the GM column-mounted ignition switch plugs, but do include the GM column-mounted turn signal switch plugs and terminals. Each harness includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 74 )
$339.99
—
$365.99
Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump
( 18 )
$584.99
Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers
( 27 )
$599.99
Painless Performance 28-circuit universal GM truck harnesses can be used in just about any pickup where basic-or-more wiring is needed. Ample wire lengths make these kits especially suited for everything, including long beds and extra cabs. GM column-mounted kits include GM (column-mounted) ignition switch plugs and the GM (column-mounted) turn signal switch plugs pre-terminated and ready to install. Painless Performance 28-circuit universal truck harnesses use GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory * Backup lights * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 14 )
$395.99
Painless Performance 22-circuit direct fit 1965-66 Mustang chassis harness have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature auxiliary circuits with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 12 )
$896.99
Painless Performance 28-circuit universal muscle car harnesses are a perfect solution to your wiring needs. They are designed to fit 1960s, 70s, or 80s GM, Ford, and Chrysler muscle cars where a bulkhead connector is required. These harnesses use the highest quality thermal-crossed linked (TXL) polyethylene wire rated to 275 degrees at 600 V--twice the voltage load of standard GPT wire. That's power on demand! Some minor bulkhead modification may be required. Please be sure to check the fitment of this harness, as there may be a more direct fit harness available for your vehicle. Includes circuits for: * Air conditioning/heat * Accessory * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power antenna * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights * Third brake light * Turn signals * Wipers
( 3 )
$539.99
Painless Performance 22-circuit 1969-70 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories, such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 6 )
$863.99
Painless Performance 22-circuit 1967-68 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 10 )
$789.99
If you are looking for a switch panel and harness to keep your racecar streetable, Painless performance 21-circuit harness and switch panel combos are for you. They include an optional connector if you want to use a GM column mounted ignition switch. The included switch panels are a roll bar/dash mount 8-switch rocker panel, prewired, and a direct plug-and-play into the harnesses. These kits come with a Painless mounting plate, grommets, terminal assortment kit, and the necessary connectors for your turn signal switch, headlights, and alternator. Each harness is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges * Starting * Taillights * Third brake light * Turn signals * Wipers
( 4 )
$559.99
If you want to keep your race car streetable and want to use all of your factory switches instead of a switch panel, Painless Performance 21-circuit Pro Street chassis harnesses are for you. Each wire is labeled and is pre-terminated at the fuse block for easy installation. They also include an optional connector if you want to use a GM column mounted ignition switch. Also, with each harness is a terminal assortment kit, with the necessary connectors for your turn signal switch, headlights, and alternator. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake Lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges B+ * Starting * Taillights * Third brake light * Turn signals * Wipers
( 6 )
$327.99
Dorman wiring connectors are designed to facilitate the flow of electrical current over a broad range of applications. The small components are available in a variety of styles to fit your specific application or universal fit needs. Choose Dorman wiring connectors for a reliable connection every time.
( 64 )
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
