Availability
Clearance
CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for a vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing. With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing taillights, turn signals, and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights can operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. Along with their plug-and-play design, these custom harnesses are also built for lasting durability. Each harness features integrated block diodes that isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. CURT towed-vehicle RV harnesses come with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle, and all the necessary hardware for a complete installation.
( 3 )
$95.99
Clearance
CURT custom wiring harnesses provide everything you need to connect your vehicle's electrical system to a trailer. With plug-and-play connectors, they easily integrate with your vehicle taillights to provide a standard trailer wiring connector, typically in the form of a 4-way flat. CURT custom wiring harnesses feature a vehicle-specific design to perfectly fit certain years of vehicles and use OEM-compatible connectors to "T" into the vehicle's taillight assembly providing a standard 4-way flat output to power the taillights, brake lights, and turn signals on your trailer. Completing CURT custom wiring harnesses are rubber dust covers. They keep the connection points clean and well protected when connectors are not in use. CURT custom wiring harnesses offer the fastest, easiest, and most secure way to wire a vehicle for towing.
( 132 )
$61.99
Mac's fleece sleeve protectors feature an integral piece of foam padding for attachment to any 2 in. strap. They'll protect the finish of your towing attachment point from abrasion during transport.
( 9 )
$11.66
—
$15.26
HardDrive mini button switches provide a clean, custom appearance for 1 in. handlebars. These mini switches and kits are offered in three finishes, and in dual and single configurations for horn, starter, or turn signal. Individual push buttons can be mounted directly into handlebar. Select an individual mini push-button switch or a dual or single switch kit in the finish you prefer for your motorcycle.
Not Yet Reviewed
$62.06
—
$74.66
Dorman transmission range sensors are designed from high-quality materials for sustained reliability. They'll ensure that the correct gear selection input is provided to the electronic control unit. These direct replacements offer a proper fit, and they feature connectors with weatherpack seals for effective corrosion prevention—plus durable wire looms that protect wiring from oil and heat damage. Restore your ability to start the vehicle and assure smooth shifting with Dorman transmission range sensors. They're available for a wide variety of specific make/model vehicles.
( 4 )
$130.99
Dorman wiring connectors are designed to facilitate the flow of electrical current over a broad range of applications. The small components are available in a variety of styles to fit your specific application or universal fit needs. Choose Dorman wiring connectors for a reliable connection every time.
( 58 )
$2.99
—
$35.99
Brothers Trucks offers C/K Series power window switches for a wide range of vehicles, including many Chevrolet and GMC trucks from the 1980s and '90s. After many years of use, wear, and burnt contacts, a lot of the switches in your classic may begin to fail. Nothing is more frustrating than electronic components not working as intended. These 4-button reproduction power window switches are made to factory specs to ensure proper fit and operation. They feature correct OE connectors and attachment points for a simple installation. Order the replacement switch recommended for your application.
Not Yet Reviewed
$213.95
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 52 )
$109.99
$24.99
—
$688.99
These Nitrous Express NX accessory power switch panels offer a clean and attractive solution for nitrous systems. These switch panels feature laser etched switch labels for a truly professional look!
( 7 )
$76.43
The impossible is possible with Ron Francis EXPRESS wiring systems! Built for your custom wiring applications, their GM powered EXPRESS systems deliver all of the connectors and wiring that you need for your complete car, including the starter, alternator, steering column, and even the cooling fan relay! Ron Francis EXPRESS systems utilize a polished stainless steel terminal block with high-temperature, fire-resistant, color-coded wiring and the highest quality terminals. And, with their clear, simple, color-coded instructions, the finished job is professional looking and clean, with less chance of problems. You'll be able to drive, pass inspection, and add accessories in the future. Wiring your ride is not impossible--it's a reality with Ron Francis GM powered EXPRESS wiring systems.
( 24 )
$633.03
—
$745.73
Ron Francis Wiring's Express Series Cobra wiring harnesses are similar to their Factory Five wiring harness, except these kits are designed for customers who plan to deviate from the Factory Five instructions, who are building another brand of Cobra-type body, or who are customizing in any other way and need a kit to fit a special application. Ron Francis Express Series wiring harnesses have a polished stainless steel panel with 16 fuses (4 Select-A-Circuit) and 18 circuits available, along with color-coded and labeled wire, high-quality relay and flashers, and simple, straightforward instructions.
Not Yet Reviewed
$633.03
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 140 )
$1.99
—
$90.99
KNS Accessories wire conduits provide easy bending and joining, while resisting flattening, kinking, and splitting. They create attractive, smooth, continuous raceways for fast wire pulling—and provide resistance to physical damage from impact or crushing. The shields are available in a variety of styles for applications from the 1930s through the '50s.
( 2 )
$6.99
American Autowire Highway 22 Plus wiring harness kits are pre-engineered for power! Developed to handle your most demanding power requirements, these Highway 22 Plus wiring harnesses packs the punch of a high-powered OEM system into a smaller, easy-to-install, and extremely compact front loading package. Plus, they pack the mounting flexibility for creative and custom electrical systems! Perfect for your street rod, custom, or kit car, American Autowire components used in this panel have extreme power handling capabilities with an easy clamp-style system to make adding and removing wires easy--no terminals, no crimping, and no screws! When you're down to the wire, the choice is easy--American Autowire! Highway 22 Plus kits feature: * Modular fuse panel for added flexibility in mounting * 175 amp Mega-Fuse protection * Self-locking, screw-down, vibration-proof connections * 40 amp fan or fuel pump relay * Headlight, dimmer, and ignition switches * Extra-long wire lengths for custom wire routing * Full-color schematics and instructions The full list of the Plus features are below *Each kit will now include a built-in LED flasher to support LED turn signals without the need to purchase an additional item. *We've added back up light feed and power wires to make the harness easier to install in a more modern vehicle. *The pre-installed 20 amp relay can now be easily changed to function as either a keyed 12 volt or ground triggered item. *We've improved our instructions to cite a wider range of examples and real-world scenarios. The panel labeling has also been updated along with the above physical changes, including wording modifications for enhanced clarity. *The wiper circuit has been upgraded to a 20 amp fuse to support all aftermarket wiper systems. This has been made an accessory circuit for more adaptability. *The AC/Heat fuse has also been moved to an accessory circuit to eliminate draw from the blower motor while the vehicle is being started. *All kits will feature our new high amp alternator and main power connection kit. This allows for the use of high amp alternators, and provides an even better level of fuse protection for the panel and charging system. This new connection kit utilizes 6 gauge wire and two 175 amp Megafuses. *Extra connectors and wiring have been added to more easily support a 4-headlight system without an additional add-on purchase. *Longer neutral safety wires for cars with console shifters.
( 11 )
$676.40
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 27 )
$899.99
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 560 )
$549.00
—
$2,564.05
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
Painless Performance 21-circuit 1967-77 direct-fit Ford F-Series harnesses are the perfect upgrade for your Ford truck. They use many of the factory connections and are already pre-terminated. Each harness features a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories, such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Accessory/cigarette lighter * Backup lights * Brake lights * Cargo Lamp * Charging * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers and washer pump
( 9 )
$774.99
Painless Performance 27-circuit Classic-Plus customizable GM truck chassis harnesses are designed to fit a wide range of trucks, Blazers, and Suburbans—whether C10, C20, or C30. They feature a factory-style bulkhead connector, allowing for easy mounting of the fuse block in the factory location, and have many factory connectors already installed on the harness out of the box. Each wire is custom-printed with the circuit identification, as well as using the GM color codes for easy installation. Wire your Squarebody once—and wire it right with these Painless 27-circuit Classic-Plus customizable GM truck chassis harnesses! Additional features and benefits include: * Each harness comes open-ended (headlight and taillight wiring) with extra length and can be paired with light socket kits (also available by Painless, but sold separately) * Included connectors for: the headlight switch, dimmer switch, wiper motor, ignition switch, blower motor and switch, blower resistor, and instrument cluster
( 35 )
$679.99
Painless Performance 22-circuit direct fit 1965-66 Mustang chassis harness have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature auxiliary circuits with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 12 )
$896.99
Painless Performance Pro Series wiring harnesses provide you everything you need to properly wire up your pro-touring or custom ride the first time. The Pro Series allows for customization of the harness by providing ample length wiring—so you have the freedom to route and cut the harness to fit your exact setup. Included are over 25 GM factory-style connectors, allowing you to turn the Pro Series harness into a direct-fit harness for your application. With built-in grounds for the lights and high-current charging capacity, the Painless Performance Pro Series wiring harnesses will ensure your ride meets the demands of today's electrical requirements. Available for cars and trucks in 23- and 25-circuit options with or without a bulkhead-style firewall mount, each model gives you the freedom of the Painless customizable harnesses—with the fit of the Painless direct-fit harnesses.
( 44 )
$544.99
—
$604.99
Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump
( 18 )
$584.99
American Autowire Power Plus 20 wiring harness kits are the easy, economical way to wire your next project. Each Power Plus 20 offers a pre-wired fuse box to save you time with a streamlined installation. Perfect for underdash mounting, these wiring harness kits implement direct run technology to the switches, fuse panel, and end locations. The wires are heat-resistant, labeled, and color-coded. The fuse box has dedicated circuits for everything from your radio to your headlights to your cruise control. These American Autowire kits provide you with what you need at a price you can afford. Power Plus 20 kits feature: * Pre-wired, ATO-style fuse panel * Factory crimp terminations * Headlight and dimmer switches * Extra-long wire lengths for custom wire routing * Steering column connector and adapter * Full-color schematics and instructions
( 55 )
$423.91
Painless Performance 23-Circuit chassis harnesses are the most comprehensive wiring harness available for your 1966-1977 Ford Bronco. Utilizing input from the early Bronco community and after months of research and development this new precedent in Bronco wiring has emerged. Features include: * Ford color coded wiring to match factory schematics * Full weatherproof design * Composite glove box for mounting the main 20 circuit weatherproof fuse block * 9 accessory wires pre-wired on individual circuits in the fuse block allow each harness to be custom tailored to each vehicle * 2 fused fuse blocks, a turn flasher and hazard flasher, and horn relay * Full color 80 plus page instruction manual * Full lifetime warranty
( 1 )
$894.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
