Automotive Wiring Accessories

Summit Racing™ Kickdown Switches

Summit Racing™ offer kickdown switches for a wide range of vehicle, engine, and transmission applications. Kickdown can be used when maximum acceleration is needed, such as passing another car. When the accelerator pedal is depressed all the way to the floor (past the normal full accelerator position), the transmission will automatically engage kickdown—immediately shift down to a lower gear. These replacement switches are built to ensure performance and dependability.

5.0 out of 5 stars ( 3 )

$30.99

Motorcraft Cruise Control Switches

There's nothing worse than a long trip with no cruise control. Motorcraft cruise control switches are designed and tested to meet OE specifications for durability and reliability, and they resist abrasion and environmental corrosion.

5.0 out of 5 stars ( 4 )

$24.99

Standard Motor Cruise Control Switches

One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control switches for fitment on a variety of vehicles. These precisely engineered switches use copper alloy to ensure excellent conductivity and are tested to meet or exceed OE specs. Standard Motor cruise control switches make long drives as comfortable as a walk in the park.

5.0 out of 5 stars ( 1 )

$70.99

—

$371.99

ARB LINX Line Pressure Control Kits

ARB LINX line pressure control kits are used in conjunction with the optional pressure control upgrade. The kits offer "set and forget" simplicity to tire inflation, as well as remote control over your airbag suspension. LINX kits are perfect for easy and accurate adjustment of tire pressures, or controlling a set of air bags with the wireless mobile display--whether inside or outside (up to 10 meters away) your vehicle. Take full advantage of the ARB LINX pressure control module, when you couple your ARB air compressor with their pressure control kits. ARB kits include: * Pressure regulator valve * Transducer * Wiring looms

Not Yet Reviewed

$295.00

Caspers Electronics IAC Harness Adapters

Caspers Electronics offers special adapters to connect a Metripack to Weatherpack idle air control valve harness. These IAC adapters are made from factory materials and specs to ensure a precise fit and proper performance.

Not Yet Reviewed

$29.79

HardDrive Mini Button Switches

HardDrive mini button switches provide a clean, custom appearance for 1 in. handlebars. These mini switches and kits are offered in three finishes, and in dual and single configurations for horn, starter, or turn signal. Individual push buttons can be mounted directly into handlebar. Select an individual mini push-button switch or a dual or single switch kit in the finish you prefer for your motorcycle.

Not Yet Reviewed

$64.76

—

$83.66

Ron Francis Wiring Gear Shift Indicator Switches

Ron Francis Wiring gear shift indicator switches are gear shift sending units for use with 12 V LED indicators. Switches include mounting hardware to fit the GM 700R4 automatic transmission and are fully push-button adjustable with no magnets to align! These units feature a built-in neutral safety switch and back-up light circuit. The decoder can be mounted inside the vehicle for easy access. Gear shift indicator plates with lights are sold separately.

Not Yet Reviewed

$176.35

—

$186.15

Kuryakyn Switch Housings

Kuryakyn switch housings are designed to fit your stock switches and add some sparkle to your handlebars. They're made of high-quality steel that's chrome plated for long-lasting durability. These housings are a perfect match for all of Kuryakyn's chrome finished hand controls, enabling you to customize the look of your bike.

Not Yet Reviewed

$99.99

Motion Pro Rev2 Handlebar Stop/Start Switches

Motion Pro Rev2 handlebar stop/start switches are required for installation of Motion Pro Rev2 or Revolver throttle kits on bikes that come with ignition and starter switches in the stock throttle assembly. Features include: * Fit 7/8 in. bars (22.2mm) * Extra narrow design is only 26mm wide * Push in/out engine switch * Momentary 2-pole starter switch * Starter switch has two separate circuits, one normally open, one normally closed for street bikes that use a headlight/starter cutoff * 550mm long wiring harness with brake light switch circuit wiring * Brake light circuit wiring pigtail 120mm long with female spade connectors * Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes * Wiring harness has bare, tinned wires without connector for easy installation of OE connector body * Made in Italy by Domino

Not Yet Reviewed

$93.49

—

$127.59

HardDrive Handlebar Switches

HardDrive handlebar switches are OEM replacements with color-matched wires and 24 in. wire leads. They are available for many different applications on many Harley® models, including hard-to-find switches for older models. Many are also available in a chrome or black finish. Choose HardDrive replacement switches for turn signals, lights, horn, and more. Select the ones designed for your motorcycle year.

Not Yet Reviewed

$38.66

QuickCar Ignition Control Panels

QuickCar ignition control panels feature bridged double-pole switches and large-gauge wires with heavy-duty connectors. These quality components provide better electrical conductivity and bulletproof reliability. Additional features and benefits include: * High-current, specially wound copper wiring provides superior performance * Specially formulated, high-temperature (105 degrees C) insulation is impervious to acids, oils, and fuels * Extra-thick connectors (.040) will not break * All connectors are professionally crimped and soldered for superior tensile strength (15,000 psi) * All connections are insulated with melt-lined shrink tubing instead of hard plastic insulators, which do not seal the connection and often crack when crimped * All connectors are plated with pure 24K gold for improved current transfer and resistance to oxidation

4.71 out of 5 stars ( 118 )

$47.46

—

$284.95

FiTech Transmission Control Harnesses

Whether you want to add an automatic transmission to your vehicle with a FiTech fuel injection system or need to replace a damaged harness, FiTech transmission control harnesses get the job done. Repair or customize your vehicle's sensor layout the proper way with the FiTech transmission control harness designed for your application.

5.0 out of 5 stars ( 1 )

$153.00

On Sale

Holley Sniper Transmission Controller Harnesses

Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.

3.0 out of 5 stars ( 2 )

$306.95

$248.35

—

$299.95

On Sale

Holley Terminator X and X MAX Engine Control Module Wiring Harnesses

Holley's Terminator X and Terminator X Max ECUs give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. When you need to service your system, Holley has the components that will fit and perform as expected. Holley Terminator X/X Max engine control module wiring harnesses allow you to access the inputs and outputs built into the Terminator X or Terminator X Max ECU. These harnesses have all eight pins populated, four inputs and four outputs. Features: * 36 in. flying leads * Pre-terminated at ECU connector * Eight wires * Sealed connector

5.0 out of 5 stars ( 2 )

$40.48

$36.43

On Sale

MSD Atomic Transmission Control Module Harnesses

Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.

3.86 out of 5 stars ( 7 )

$280.95

$252.85

—

$337.95

Cooling Components 2-Speed Fan Controllers

Cooling Components 2-speed fan controllers are smart systems offering many advantages over the old school use of relays and temperature sending units. You have the choice of three temperature settings (184/195/205) based on your engine thermostat. They monitor your engine coolant behavior and set the fan start up accordingly, for instance if your engine warms up rapidly the fan would also start sooner. Cooling Components 2-speed fan controllers are weatherproof, so they can be installed anywhere, and installation is way easier than the relay systems. Additional benefits and notes: * Modern, high-quality, all-solid state design * Easy to mount; temperature sensor mounts under thermostat housing bolt * Controls one or two fans/speed * 30+ amp continuous load, 80 amp startup surge * Choice of three temperature settings (185/195/205 degrees) * Sensors to conform with your engine thermostat * A/C request, the fan turns on upon A/C request through a trinary switch * Detects temperature sensor faults, turns on fan for fail-safe operation * Weather-resistant design allows mounting inside or outside the vehicle cabin * Reverse battery, short circuit, and overload protection * 10-32 studs for solid high-current connections * Super compact size, measures only 3.7 in. x 2.6 in. x 1 in.

4.0 out of 5 stars ( 2 )

$250.00

Dakota Digital Analog Gauge Control Box Replacement Harnesses

Dakota Digital offers replacement harnesses for use between their analog gauge control boxes and display/gauges. They're available in 3 ft. and 6 ft. lengths, in 8-pin or 6-pin styles. The harnesses are compatible with both RTX and HDX control boxes.

5.0 out of 5 stars ( 1 )

$9.45

Rostra Original Equipment Style Cruise Control Switches

Rostra original equipment style cruise control switches look and perform just like the factory originals. These switches included wiper controls where indicated.

3.8 out of 5 stars ( 5 )

$49.99

ACDelco GM Genuine Parts HVAC Blower Control Modules

ACDelco GM Genuine Parts HVAC blower control modules manage the temperature, air distribution, blower fan, and air conditioning functions in automatic climate control systems, and they are GM-recommended replacements for your vehicle's original component. These original equipment HVAC control modules have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

4.5 out of 5 stars ( 4 )

$78.99

Vintage Air Replacement Control Panel Switches

Switches, control valves, relays, and more are available from Vintage Air. These replacement control panel switches keep your Vintage Air systems running cool with a perfect match and fit. Do you need to replace old or worn parts? Do it with the correct components from Vintage Air.

4.3 out of 5 stars ( 47 )

$6.99

—

$62.99

On Sale

Hurst Roll Control Button Switches

Hurst Roll Control button switches have the edge with a microswitch and cords. These switches deliver immediate and accurate releases with a capacity of 10 amps. The included wire makes installation hookup a snap.

4.42 out of 5 stars ( 19 )

$51.19

$46.07

—

$142.95

Painless Performance Trail Rocker Jeep TJ Accessory Control Systems

Painless Performance Trail Rocker Jeep TJ accessory control systems allow you to control up to eight accessories on your TJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it are eight prewired switches mounted in a Painless custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. They are easy to install with detailed instructions and plug-and-play design. Features: * Control up to eight accessories, (8) 30 amp fuses and (8) 30 amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Switch panel mounts eight LED switches in a factory non-intrusive dash location

Not Yet Reviewed

$544.99

ARC 6001Z Series Control Modules

The 6001Z series from Auto Rod Controls is the latest in control module innovation from ARC! Based on ARC's exclusive flat touch technology this new system is packed with new features that racers not only want but need in an electrical system. This new system incorporates a built-in system kill switch like some of our other units, but to keep the size of the unit down we developed multi-function switches. The water pump and fan are on the same switch. Touch the switch once to turn the water pump on and touch it again to turn on the water pump and the fan. The water pump and fan have separate relays but share one switch. The same holds true for the taillight switch, one touch turns the taillights on the second touch turns out the taillights and turns on the new built in interior lighting which is available in blue or white. Other innovations include ARC's exclusive oil pressure control. The system with monitor the oil pressure through a user chosen pressure switch and if the oil pressure falls below the switch setting it will automatically turn the ignition off. ARC also incorporated a neutral safety into the relay board. Simply connect the supplied wires from the relay board to the neutral safety switch and you are done. The car will not start unless the shifter in in a proper location for starting. This system also has a firewall bump start switch circuit built in. Simply run a supplied wire from the relay board to the bump start switch and ground the switch and your bump start switches are ready for use. These will also work through the neutral safety switch for complete safety. ARC's 6001Z series control modules include printed wire for the car and a user activated ground trigger relay for any use. We also included a dedicated 5-amp data logger circuit which will stay on for 6 seconds after shutting off the ignition to allow for processing. Rounding out this system are 2 30 amp fused power take offs for any use. ARC also includes LED's at every output on the relay board to quickly see if there is power leaving the relay board to the accessory connected to it.

Not Yet Reviewed

$840.99

—

$948.99

Painless Performance Trail Rocker Jeep CJ Accessory Control Systems

Painless Performance Trail Rocker Jeep CJ accessory control systems allow you to control up to eight accessories on your CJ Jeep. The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it are eight prewired switches mounted in a Painless custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. They easily installs with detailed instructions and a plug-n-play design. Features: * Control up to eight accessories, (8) 30-amp fuses and (8) 30-amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Various switch panel options mount up to eight LED switches inside the Jeep * Fuses light up when blown

Not Yet Reviewed

$349.99

—

$481.99