Automotive Wiring Accessories

Wiring Specialties Pro Series Coil Pack Harnesses

Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee

4.97 out of 5 stars ( 29 )

$169.99

Painless Performance Pro Series Wiring Harnesses

Painless Performance Pro Series wiring harnesses provide you everything you need to properly wire up your pro-touring or custom ride the first time. The Pro Series allows for customization of the harness by providing ample length wiring—so you have the freedom to route and cut the harness to fit your exact setup. Included are over 25 GM factory-style connectors, allowing you to turn the Pro Series harness into a direct-fit harness for your application. With built-in grounds for the lights and high-current charging capacity, the Painless Performance Pro Series wiring harnesses will ensure your ride meets the demands of today's electrical requirements. Available for cars and trucks in 23- and 25-circuit options with or without a bulkhead-style firewall mount, each model gives you the freedom of the Painless customizable harnesses—with the fit of the Painless direct-fit harnesses.

4.85 out of 5 stars ( 47 )

$544.99

—

$604.99

Painless Performance 21-Circuit Pro Street Chassis Harnesses

If you want to keep your race car streetable and want to use all of your factory switches instead of a switch panel, Painless Performance 21-circuit Pro Street chassis harnesses are for you. Each wire is labeled and is pre-terminated at the fuse block for easy installation. They also include an optional connector if you want to use a GM column mounted ignition switch. Also, with each harness is a terminal assortment kit, with the necessary connectors for your turn signal switch, headlights, and alternator. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake Lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges B+ * Starting * Taillights * Third brake light * Turn signals * Wipers

4.83 out of 5 stars ( 6 )

$327.99

ARC Pro Mod Flat Touch Switch Panels with Backlit System Kill Switch

ARC Pro Mod Flat Touch switch panels with backlit system kill switch are truly unique! These Flat Touch switch panels use no electronics, which makes them immune to EMI and RFI interference. Units master kill switch is designed to turn off any, none, or all the switches at the same time for safety during competition racing. Available in 4-switch, 8-switch, or 12-switch configurations, each module comes with a selection of race words for switch labeling. White face switch modules have text labels backlit red when the switch is off, allowing you to not only see where, but what each switch is. When the switch is turned on the backlight changes from red to green. Black face switch models are equipped with nightglow, and function exactly the same as white face switch modules but feature illuminated text and outer perimeter that automatically increases the unit's brightness at night to maintain better visibility in low light vehicles.

Not Yet Reviewed

$864.99

—

$914.99

Proform Mopar Valve Cover Adapter Grommets

Proform offers valve cover adapter grommets for a variety of Mopar applications—including Chrysler, Dodge, and Plymouth vehicles. These grommets adapt screw-in style breather holes to push-in.

5.0 out of 5 stars ( 5 )

$3.99

Edelbrock Pro-Flo 4 Fuel Pump Relay Kits

Edelbrock Pro-Flo 4 fuel pump relay kits were created to handle the high current that your EFI system needs to get the fuel from the tank to the engine. These relay kits help prevent voltage drops to ensure your fuel pump gets full voltage from your vehicle's battery to provide consistent fuel pressure to the regulator. These Pro-Flo 4 fuel pump relay kits are designed to plug into a Pro Flo system and come terminated with a fuse already inline.

3.67 out of 5 stars ( 3 )

$163.95

MSD Pro 600 CDI Ignition Coil Harnesses

MSD Pro 600 CDI ignition coil harnesses offer the same length, quality wire, and connectors as the originals for an exact match and reliable, continued performance. If you have damaged the main harness or are simply rewiring a car, MSD Pro 600 coil harnesses are direct replacements.

Not Yet Reviewed

$101.95

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses

Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.

4.5 out of 5 stars ( 2 )

$33.95

—

$149.95

Auto Pro USA Horn Button Accessories

Auto Pro USA horn button accessories are available for a variety of makes and models—many are direct-fit original equipment replacement parts; however, Auto Pro USA also offers a selection of part accessories for custom applications as well. Order the parts you require to fit your project.

Not Yet Reviewed

$9.99

Motion Pro Fuel Injector Cleaner Pigtails

Motion Pro fuel injector cleaner pigtails are designed to work with most OEM fuel injectors used on motorcycle engines. These pigtail adapters are for use with Motion Pro's fuel injector cleaner kits to flush and back flush fuel injectors for effective cleaning and efficient performance. This is the fuel injector pigtail only. The fuel injector cleaner kit is sold separately. Motion Pro fuel injector cleaner pigtails are available for most fuel injectors found on today's motorcycles, ATV, and UTV's.

Not Yet Reviewed

$26.59

Edelbrock Pro-Flo EFI Fuel Pump Relays

Are you experiencing some issues with your Edelbrock Pro-Flo EFI system? Perhaps it's time to replace bad components with new ones. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum best!

Not Yet Reviewed

$31.95

Motion Pro Rev2 Handlebar Stop/Start Switches

Motion Pro Rev2 handlebar stop/start switches are required for installation of Motion Pro Rev2 or Revolver throttle kits on bikes that come with ignition and starter switches in the stock throttle assembly. Features include: * Fit 7/8 in. bars (22.2mm) * Extra narrow design is only 26mm wide * Push in/out engine switch * Momentary 2-pole starter switch * Starter switch has two separate circuits, one normally open, one normally closed for street bikes that use a headlight/starter cutoff * 550mm long wiring harness with brake light switch circuit wiring * Brake light circuit wiring pigtail 120mm long with female spade connectors * Stainless steel screws and internal rubber pad positions switch on handlebar securely without drilling holes * Wiring harness has bare, tinned wires without connector for easy installation of OE connector body * Made in Italy by Domino

Not Yet Reviewed

$115.49

Nitrous Outlet Corvette Pro WinMax Wiring Harnesses

Adding the WinMax nitrous controller to your Corvette is a user-friendly task with these plug-and-play harnesses. Nitrous Outlet Corvette Pro WinMax wiring harnesses feautre a through-tunnel design that adds protection to the harness from the elements, while making installation quick and easy. They include full color detailed installation instructions, colored diagrams, pin out locations, and the necessary mounting hardware. Additional features and contents: * Harness routing instructions * Detailed colored wiring diagram * Individual labeled wiring leads * Molecular structure protective sheathing * Pre-terminated Deutsch connectors * High-quality Molex terminals * LED indicator fuse panel * Beuler 40/60 amp relays * Easy-access relay center * Dual stage system operation * Remote bottle opener * Bottle heater, purge * Dedicated fuel system * Two ignition retard outputs * Fuel pressure safety switch * Nitrous pressure sensor

Not Yet Reviewed

$2,104.99

Holley EFI Pro-Billet Ignition Adapters

Holley EFI Pro-Billet ignition adapters allow for plug-and-play ignition timing control when utilizing an MSD Pro-Billet distributor and Holley EFI main harness with an ignition connector. The adapters are ideal for use with Terminator X electronic fuel injection.

5.0 out of 5 stars ( 3 )

$40.22

—

$40.48

REDARC Tow-Pro Switch Insert Panels

REDARC Tow-Pro switch insert panels aid the installation of the market-leading Tow-Pro electric brake remote head. They're available in a variety of styles, both universal and application-specific, for dash or console mount. Create an OE-look remote head mount with a switch panel from REDARC.

4.33 out of 5 stars ( 3 )

$5.50

—

$15.00

All-Pro Off-Road Compressor Extended Harnesses

All-Pro Off-Road extended harnesses for ARB compressors solve the problem of short factory wiring, enabling cleaner, more convenient, and complete installations for powering your ARB air compressor and lockers anywhere in your truck. These harnesses use automotive-grade wiring appropriately sized for the compressor's voltage and amperage needs, ensuring reliability. Pre-installed connectors and plug-and-play design helps eliminate difficult wiring, which reduces installation time and complexity.

Not Yet Reviewed

$299.99

Dakota Digital EFI Interface Module Wiring Harnesses

The Dakota Digital EFI Interface Module wiring harness is a purpose built interface designed to connect the Dakota Digital BIM-EFI-1 module directly to compatible aftermarket EFI systems, allowing critical engine and drivetrain data to be seamlessly shared with Dakota Digital gauge systems. Each harness is EFI specific, ensuring proper CAN bus communication and compatibility with supported systems, making it an essential component for clean, accurate, and efficient integration of aftermarket EFI data into Dakota Digital VFD3, VHX, HDX, RTX, and GRFX gauge platforms.

Not Yet Reviewed

$23.75

FuelTech NanoPRO Bosch LSU 4.9 Harnesses

FuelTech offers NanoPRO harnesses specifically designed for use with Bosch LSU 4.9 oxygen sensors. The 78 in. harnesses are the typical length for most applications. They are compatible with FuelTech NanoPRO products, but not with FuelTech WB-O2 Nano.

Not Yet Reviewed

$69.00

REDARC Encapsulated Protection Devices

REDARC encapsulated protection devices are 7 amp diodes suitable for 12 and 24 V applications. It is totally encapsulated, with sealed connections and will work in ambient temperatures up to 85 degree C (185 degrees F). It has been designed to fit in the trailer stop lamp feed to support the installation of Tow-Pro brake controllers on vehicles where back feed of 12 V during Tow-Pro manual override may interfere with the vehicle systems.

Not Yet Reviewed

$60.00

KC HiLiTES Gravity LED Pro6 Plug-N-Play Light Bar Harnesses

KC HiLiTES Gravity LED Pro6 plug-n-play light bar harnesses are specialized, weatherproof wiring kits designed to connect, power, and operate specific lengths of Pro6 light bars. These replacement harnesses feature dedicated, sealed DT connectors for each individual light pod in the array. They're engineered to simplify installation, featuring, for example, 5 to 9 connectors depending on the bar size, ranging from 32 in. to 57 in. models. Key features: * Plug-n-play convenience: Designed specifically for quick, direct connection to the Pro6 light bar system * Weatherproof connectors: Utilize sealed DT connectors to ensure reliability in harsh off-road conditions * Custom fit: Specific harnesses are available for different Pro6 configurations (e.g., 5-light, 6-light, 7-light, 8-light, 9-light) * Components: Kits include the necessary wiring, relay, and switch to operate the light bar

Not Yet Reviewed

$79.00

—

$109.00

Dorman Uninsulated Connectors Builders Series Assortment Kits

Dorman uninsulated connectors Builders Series assortment kits make better-looking electrical repairs and accessory installations. This Pro Pack terminal assortment features color-coded terminals with separate black heat-shrink insulation for a clean appearance. A handy plastic storage case with dividers is included to keep all items in kit organized. Features for Kit 94095: * Professional appearance: these butt connectors and ring and spade terminals are designed for a clean, professional look when completed * Color-coded: yellow, blue, and red color bands make it easy to identify these terminals as suitable for proper wire gauge * Heat-shrink insulation: these terminals include pre-cut black heat-shrink tubing for a secure, reliable connection * Quality materials: these terminals are made from high-quality materials for superior conductivity and corrosion resistance

5.0 out of 5 stars ( 1 )

$31.99

Electric-Life Flexible Inclined Rubber Door Wire Looms

Hide those unsightly wires that run through your door jamb with Electric-Life flexible inclined rubber door wire looms. They make great complements to power window kits, shaved door kits, or custom stereo installs. Made from durable rubber material they offer years of functionality and are a great way to add those finishing touches that your custom ride needs. Whether you're a pro builder or a weekend warrior looking for custom parts and accessories, Electric-Life has what you need!

4.66 out of 5 stars ( 32 )

$23.99

ATI Double O Trans-Brake Buttons

ATI Double O trans-brake buttons can be best described as: Quick, extremely comfortable, and consistent. Designed for bracket racers, by bracket racers they offer the quickest release available and are perfect for .400 Pro Tree racers. ATI Double O trans-brake buttons provide the latest in button design technology by the Biondo Racing Family, featuring a fully anodized black bracket and rim, and an oversized, red concave-shaped top that measures close to a 1 in. diameter, looks great, and fits a finger perfectly, with or without gloves. The bracket allows for easy mounting into any 1/2 in. hole of any door car or dragster steering wheel. Two shims are included for easy installation and are used to fill space between the actuator, and the bracket.

5.0 out of 5 stars ( 1 )

$82.99

Lokar Interior Battery Disconnect Lever Kits

Lokar interior battery disconnect lever kits are designed to bolt directly to B&M Pro Bandit, B&M Ratchet, Quarter Pro, Precision Performance Products, TCI Thunder Stick, TCI Outlaw, TCI Lighting, and Hurst Quarter Stick shifters, or they can be mounted to the floor. They include a red anodized billet aluminum power lever for quick recognition. They can work in conjunction with a fire system kill switch, a standard 8 ft. push/pull cable, and the necessary mounting hardware.

4.83 out of 5 stars ( 6 )

$316.95

—

$409.95