Availability
On Sale
If you don't feel comfortable cutting up your factory wiring or don't want to attempt to swap pins on your headlight plugs, Holley RetroBright adapters make it a plug-and-play affair. If the standard H4 male plug used on Holley RetroBright headlights will not fit your female socket or you need to swap pins around to match up properly, these harnesses will make the job quick and easy. Additional details: * Allows Holley RetroBright headlights to connect to any non-standard H4 sockets or those that require a pin swap * Eliminates the need to cut factory wiring * Can be used to replace old and brittle factory sockets * Includes two Holley RetroBright H4 adapters
Not Yet Reviewed
$11.33
$6.23
On Sale
Mr. Gasket flexible convoluted wire coverings feature convoluted polyethylene coverings with a precut slit down the middle. Their wide verity of sizes will accommodate many wires, providing protection and a neat, clean appearance.
( 3 )
$16.95
$9.32
On Sale
Brothers Trucks offers C/K Series column dimmer switches for a wide range of vehicles, including many Chevrolet and GMC trucks from the 1980s. After many years of use, wear, and burnt contacts, a lot of the switches in your classic may begin to fail. Nothing is more frustrating than electronic components not working as intended. These reproduction dimmer switches are made to factory specs to ensure proper fit and operation. They feature correct OE connectors and attachment points for a simple installation on the steering column, just like the original. Order the replacement switch recommended for your application.
Not Yet Reviewed
$11.95
$6.57
On Sale
A common part that can get worn out on your classic squarebody is a lock cylinder. Whether it is the ignition, or the door lock, Brothers Trucks ignition lock sets are the answer. The new lock sets include a new ignition lock cylinder, both door locks, and two matching keys to ensure you do not have a mismatched set. Brothers Trucks' locks and ignition use the same key and mount exactly the same as factory for an easy installation.
( 1 )
$22.03
$12.12
On Sale
Holley offers RetroBright headlight wiring connectors in male or female configurations. These unterminated headlight connector are designed for use on any H4 or 9003 system where an extra connector is needed for an adapter harness for RetroBright headlights.
Not Yet Reviewed
$3.05
—
$3.51
$1.68
—
$1.93
On Sale
AEM Electronics' CCU AC input connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$59.89
$44.92
On Sale
AEM Electronics' CCU HVDC output connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$76.25
$57.19
On Sale
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$42.49
On Sale
Scott Drake turn signal harness sockets make installing your Mustang turn signal switch easier. They're available in different styles, made from ABS plastic using the original Ford print. These small parts were once hard to find, but are now found at Scott Drake! Order the model recommended for your application.
( 1 )
$11.17
$6.14
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 87 )
$92.35
$50.79
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 3 )
$52.69
—
$112.95
$28.98
—
$62.95
On Sale
MSD Power Grid 3-stage delay timing controls are an add-on module for use with the MSD Power Grid system (sold separately). These controls let you activate up to three individual outputs based on time. The outputs can trigger a relay to activate nitrous, shifter, etc.; when the clutch/transbrake is released, the Power Grid will start the timers through the CANN connection. They'll also display live ignition timing! Thanks to the advanced data acquisition features of the MSD Power Grid, all of the settings and values you set with the 3-stage delay timer can be reviewed after each run to assist in tuning the program for the next run. Now that's timing control!
( 1 )
$368.95
$239.95
On Sale
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$299.95
$164.95
On Sale
Scott Drake sequential taillight kits give your stock lenses and housings modern signaling. With patented "Smart-Signal" technology and an exclusive "Batwing" design, Scott Drake sequential taillights offer a hassle-free installation--no splicing is required! And, what's even better is that they work with your factory pieces! Get sequential lighting for your classic Mustang with taillight kits from Scott Drake.
Not Yet Reviewed
$449.95
$247.95
On Sale
These Mr. Gasket flexible tubing and tie strap kits are designed to protect electrical wire from heat and abrasion. They are manufactured from polyethylene and aree available in black, red, blue, yellow, and purple. The Mr. Gasket flexible tubing and tie strap kits come in 1/4 in., 3/8 in., 1/2 in., and 3/4 in. diameters. Complete the installation with the included six tie wraps; they are molded in the same color as the tubing for a perfect match, and give a nice finished look.
( 1 )
$14.09
$7.75
On Sale
Davies Craig electric booster pump wiring pigtails feature an OEM wiring harness with a male connector designed for quick and easy linking. Booster pumps are used in a variety of applications, including the heater and LPG systems, solar pumps, water-cooled motorcycles, go-kart engines, turbo air/water intercoolers, and household irrigation. Help your EBP23, EBP25, or EBP40 water pump to keep things flowing with a Davies Craig electric booster pump wiring plug.
Not Yet Reviewed
$15.75
$14.18
On Sale
LoD Offroad LED light wiring harnesses are perfect for cars, trucks, off-road utility vehicles, and even trailers. Each wiring harness kit features a 40 amp relay, waterproof on/off switch, and waterproof fuse holder. The LoD Offroad premium wiring harnesses come complete with female blade terminals to ensure proper connection. They offer quick and easy installation with the included wiring diagram. Specs: * 12 ft. relay wiring harnesses for LED lights * 12 V 40-amp relay * 3-pin On/Off rocker switch * UL approved * Work with a variety of on/off-road vehicles
( 1 )
$27.90
$25.11
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
