Availability
Showing In Stock Items. Show All 61 Items.
Caspers Electronics sealed 12 V to 5 V converter modules are designed to facilitate converting a 12 V feed into a 5 V output. They are especially useful when adding things like pressure transducers, MAP sensors, TPS sensors, or any other 5 V powered items to your existing wiring. They are completely sealed and weatherproof, and will allow for a 5 V feed without having to splice into any wires. Simply provide the modules with a switched 12 V feed and ground to give you 5 V out on the 3rd wire. Package includes: * Module * AT06-4S connector * Seal plug * Three 16-18AWG terminals * Instructions
Not Yet Reviewed
$38.99
These FAST XFI converter cables feature Qwik Tune technology, which allows for ECU programming without a laptop. XFI cables can process, analyze, and adjust four times faster than previous EFI systems. They also make it possible for you to have data logging capabilities and memory for analyzing up to eight additional monitored inputs. If you're looking for an XFI converter cable, Fast has the high performance cables you need.
Not Yet Reviewed
$46.95
Haltech Nexus Rebel LS MAP sensor adapter harnesses convert the MAP sensor connector on the Rebel LS main terminated harness from an early- style/Gen III to a modern Gen IV connector.
( 1 )
$24.00
Repair your faulty connections with the help of RESTOPARTS® Supplied wire connectors. These pigtails are made from the correct gauge wiring to properly connect your new or original switch. Available to fit many makes, models, and years, you can keep your window switches operating properly with RESTOPARTS® Supplied power window/convertible switch pigtails.
Not Yet Reviewed
$46.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$33.99
$20.99
—
$29.99
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$25.65
Summit Racing™ offers alternator conversion harnesses for a wide selection of vehicles, particularly classic cars from the 1960s and '70s. These high-quality OEM-style replacements are "external to internal regulator" harnesses designed to convert your external alternator to the new style internal regulated alternators available in higher output models. They will not ruin your factory wiring harness, they are plug-and-play, and can be retuned to factory in minutes. Order the model recommended for your application.
( 8 )
$26.99
—
$34.99
Do you need to convert or repair your existing multi-port fuel injection harness? These Painless Performance fuel injector wiring connectors enable you to repair crushed or broken connectors on your factory harness and will also allow you to convert over to the EV6/USCar injectors that can be found on modern multi-port fuel injection systems. Painless Performance fuel injector wiring connectors contain the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.
( 20 )
$35.99
—
$39.99
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 3 )
$43.99
Haltech Nexus Rebel LS oil pressure sensor adapter harnesses convert the oil pressure sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen IV connector.
Not Yet Reviewed
$24.00
ICT Billet alternator wiring harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. They're designed to be used when converting from standard 105 amp GM alternators to hi-amp GM alternators, such as 145 or 160 amp. When swapping out your alternator, don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. Order the ICT harness recommended for your application.
( 1 )
$22.99
—
$43.99
Haltech Nexus Rebel LS knock sensor adapter harnesses convert the two Gen IV knock sensor connectors on the Rebel LS main terminated harness into a single plug, used in Gen III LS engines.
Not Yet Reviewed
$24.00
ARC electrical switch panel roll bar conversion bracket kits enable you to convert your in-dash flat touch units to roll bar mounts. The bolt-on aluminum brackets are available for 4, 8, and 12-switch panels.
Not Yet Reviewed
$37.99
JMS Chip offers electrical wiring pigtails for a variety of applications. These can be used to replace a worn or modified MAF connector, convert your vehicle from one sensor to another, or facilitate a custom build. Whether it's tracking mass airflow or streaming engine data to your onboard computer, JMS Chip supplies the equipment and accessories you need for top performance.
( 2 )
$30.75
Diode Dynamics LED flasher relays are ideal solutions if you're converting to newer LED lights. When your factory turn signal bulbs go out, your vehicle's flasher senses that power loss, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking (a. k. a. "hyperblinking"). So even though the LEDs are functioning just fine, your car thinks the bulbs went out! Regulate those no-flashing or fast-flashing issues with the Diode Dynamics LED flasher relays designed to fit your application.
( 2 )
$24.95
—
$34.95
Another problem solver from Ron Francis Wiring. Their headlight conversion harnesses are solutions to convert from sealed beam bulbs to 9004-9007 bulbs without splicing or re-wiring. Just remove connector from old beams, plug into black connector and the blue connector mates to your new bulb assemblies. Ron Francis recommends their HR-56 Halogen H/L relay kit to be used, if not already installed.
Not Yet Reviewed
$33.27
Do you need a brake switch relay that can be used with your cruise control or torque converter disengagement switch? If so, then these Ron Francis Wiring brake switch and cruise control relays are just what your vehicle needs. These brake switch and cruise control relays come with all necessary wiring for an easy installation. Eliminate the need for special brake switches with these Ron Francis Wiring brake switch and cruise control relays.
( 1 )
$23.47
Wire your high-amperage accessories with Ron Francis accessory feed wires. Your power windows, seats, locks, trunk, etc. soak up your battery power, and isolating them from more delicate electronics is good. Ron Francis Wiring offers their pre-printed, color-coded, fire-resistant wires to complete your ride's wiring like a professional. Wire your antenna, windows, trunk, convertible top, or even your heated seats! Go first class and do the job right with accessory feed wires from Ron Francis Wiring.
( 1 )
$29.35
—
$33.27
Kuryakyn passing lamp adapters allow plug-and-play installation of Kuryakyn LED passing lamps without splicing wires. They convert your OEM harness to Kuryakyn-style connectors, creating a time-saving installation. Eliminate the hassle of cutting and splicing; Kuryakyn passing lamp adapters let you plug and go.
Not Yet Reviewed
$28.99
Twin Power round security key ignition switches are 7-pin, tumbler-type switches and are available in stock 2-wire replacement or 3-wire custom styles. They fit in an under-tank or stock location and each set comes with two keys. They feature waterproof boots and sealed wires to help keep moisture out. Secure and dress up your Harley-Davidson® with these chrome ignition switches. The 3-wire style has three positions: Ignition with lights, off, and ignition without lights.
Not Yet Reviewed
$31.96
ACCEL's starter relays are equipped with durable heavy-duty contacts in rugged molded cases. They offer extended durability and corrosion resistance against moisture, road dirt, gasoline, and more. These starter relays from ACCEL are available in blade or post types to ensure reliable starting, even for your high performance Harley-Davidson®. Whether your ride is wild or mild, ACCEL starter relays will work great for you.
( 1 )
$32.87
Whether this is a repair or an upgrade to your bike, the security of round key HardDrive 3-position ignition switches will turn your Harley® on! They fit in your current key location without modification. You'll like the barrel locks for the higher level of security, smooth operation, and good looks. Now your ignition can deliver safety and dependability with multi-position switches from HardDrive.
( 1 )
$35.06
Don't get stranded when your solenoid relay switch goes out--Twin Power solenoid housing starter buttons give you peace of mind. Their most useful function is the elimination of the starter button and relay. They can also be used as a simple backup system to a faulty starter button or a relay short, as these push-button switches allow the starter to engage and operate directly from the solenoid. These chrome switches fit the Big Twins noted in the applications. Harley® starter relays can and will go bad, even at the worst possible time. These switches are great insurance for future riding.
Not Yet Reviewed
$28.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
