Availability
Showing In Stock Items. Show All 533 Items.
Protect and clean up any wire harness installation with Painless Performance PowerBraid chassis harness kits. The braided, laterally split wire wrap closes around the wire bundle without the need for additional taping or fasteners. These kits include wire ties and self-sealing electrical tape to complete the installation. Painless Performance PowerBraid kits feature everything you need in one box to professionally cover any chassis harness. Kits include: * 10 ft. of 1/8 in. diameter sleeving * 60 ft. of 1/4 in. diameter sleeving * 30 ft. of 1/2 in. diameter sleeving * 6 ft. of 1 in. diameter sleeving * 1/4 in., 3/8 in. and 1/2 in. heat shrink tubing * 140 cable ties * 1 roll of stretch and seal tape
( 59 )
$159.99
MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent
( 13 )
$217.95
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 12 )
$158.95
Painless Performance 20-circuit pre-wired universal style fuse blocks can be used in any vehicle where upgrading or adding a fuse block is desired—and their compact size makes it super easy to mount them just about anywhere! Simply terminate the circuit and attach it to the 20-circuit fuse block. Painless Performance 20-circuit pre-wired universal fuse block kits include a mounting bracket, fuses, flashers, horn relay, crimp-on style terminals and comprehensive instructions (additional wire not included). Fuse blocks are pre-wired and labeled for the following circuits: * Starting * Air conditioning/heat * Gauges/dash instruments * Brake lights * Headlights * Coil * Horn * Dome light * Radio * Electric fan * Turn signals * Emergency flashers * Wipers * Alternator * Power windows * Power door locks * Electric fuel pump * Backup lights * Cigarette lighter and optional accessories
( 8 )
$236.99
MSD solid state relays clean up your wiring. These modules take the place of four standard relays and eliminate unsightly wiring. Four independent channels can be activated using either power or ground, and each channel is capable of handling up to 20 amps of continuous current—providing up to 80 amps of power. MSD solid state relays provide a compact and clean design to make your wiring project a breeze.
( 23 )
$199.95
Dangling wires are unsightly. Keep your wires under wraps with Summit Racing™ woven fabric wire wraps. Summit Racing™ wire wraps feature heat-retardant, woven polymer material construction split lengthwise for an easy installation. These flexible wraps spring closed around your wire bundles for a snug fit without the need for zip ties or tape. These wire wraps protect wires from abrasion and damage and are offered in different lengths and diameters.
( 97 )
$180.99
Have you ever experienced the aggravation and inconvenience of your engine not starting? Battery Brains use unique electronic technology to ensure that you will never be stranded again by a dead battery. Gold Battery Brains monitor the battery and isolate the electrical system if they detect an energy drain, to ensure a sufficient charge to start the engine. These small brain boxes feature a manual reset button to activate and easily mount on your vehicle's positive battery terminal. The Gold Battery Brains can include either a wired switch mounted remotely or a wireless remote control to activate the unit, reconnecting the circuit and starting the vehicle. The remotes can also be used to disconnect the battery when leaving the vehicle as an anti-theft feature. Your battery can now have brawn and brains, giving you peace of mind and preventing the loss of valuable time and money.
( 61 )
$124.99
—
$129.99
Cooling Components 2-speed fan controllers are smart systems offering many advantages over the old school use of relays and temperature sending units. You have the choice of three temperature settings (184/195/205) based on your engine thermostat. They monitor your engine coolant behavior and set the fan start up accordingly, for instance if your engine warms up rapidly the fan would also start sooner. Cooling Components 2-speed fan controllers are weatherproof, so they can be installed anywhere, and installation is way easier than the relay systems. Additional benefits and notes: * Modern, high-quality, all-solid state design * Easy to mount; temperature sensor mounts under thermostat housing bolt * Controls one or two fans/speed * 30+ amp continuous load, 80 amp startup surge * Choice of three temperature settings (185/195/205 degrees) * Sensors to conform with your engine thermostat * A/C request, the fan turns on upon A/C request through a trinary switch * Detects temperature sensor faults, turns on fan for fail-safe operation * Weather-resistant design allows mounting inside or outside the vehicle cabin * Reverse battery, short circuit, and overload protection * 10-32 studs for solid high-current connections * Super compact size, measures only 3.7 in. x 2.6 in. x 1 in.
( 2 )
$250.00
American Autowire Highway 22 trunk mount kits allow you to mount the panel of your Highway 22 panel wiring kit in the trunk or rear of most any vehicle. The kits consist of a series of longer wires that replace the standard wires that come with your Highway 22 kit, which may be too short for mounting in the back of the vehicle.
( 6 )
$185.25
If a car thief finds his way around this security safeguard, just hand him the keys and wave goodbye. Ron Francis Wiring Safe & Sound battery disconnects are advanced technology that lets you completely shut down your vehicle's entire electrical system with one simple click! Just route your main battery cable through a remote cutoff solenoid that you've hidden … then trigger it with the key fob as you walk away. Total power shutdown! These units are also ideal for repair safety purposes and for preventing battery drain over periods of inactivity. For additional security, 4-channel Safe & Sound disconnects can be wired to also control three other items, like windows, door locks, or the fuel pump. You can never take too many precautions with your valuable investment!
( 10 )
$204.95
—
$279.95
Can't slow your reaction time enough? Just-N-Time Button trans-brake buttons deliver an amazing range of adjustability and have been NHRA accepted for all classes. Just-N-Time buttons use a combination of 6 color coded springs, multiple mounting positions and a selection of spacers to offer you maximum adjustability. The included spreadsheet offers over 100 button release speeds accurate to + / - .002 and the selection is that simple--no tools needed. Plus everything is stored in a handy case to keep in your race car, allowing you to make quick adjustments right in the staging lanes! Just-N-Time Button trans-brake buttons deliver infinite adjustability for untold winning performances.
( 16 )
$199.99
—
$249.99
Wilwood EPB caliper wiring harnesses are offered for both the single and dual caliper. The replacement harnesses are for Wilwood's Electronic Parking Brake (EPB) switch with ECU and EPB caliper plugs. Both harnesses include fusing and protective plastic cable loom.
Not Yet Reviewed
$185.74
—
$186.97
The safe way to add electrical accessories is with Painless Performance Cirkit Boss kits, the first circuit isolators that provide both constant and ignition hot circuits. Instead of tapping into an existing wire or spare circuit at the fuse block, Cirkit Boss kits are add-on, relay-activated fuse blocks, activated by a small wire from any ignition source. Cirkit Boss kits protect bulbs, accessories, and computers from the harmful spikes that may occur in a poorly connected power supply. All Cirkit Boss units are made using TXL cross link polyurethane wire rated to 275 degrees F at 600V, and they include a 30 amp inline circuit breaker, a relay, mounting hardware, and an assortment of terminals. Circuits are individually fused for up to 20 amp applications and use a heavy duty 30 amp relay. All wires are machine-terminated for reliability.
( 34 )
$107.99
Flaming River Big Switch 500 battery disconnects safely protect your vehicle from theft or electrical fire. These heavy-duty 500 amp switches have a high-impact design and are corrosion-resistant. They feature silver tin oxide pads and silver plated terminals to provide a high amp rating, and the dual spring internals help to withstand extreme vibration—making them ideal for racing and heavy-duty truck applications. Flaming River Big Switch 500 battery disconnects are offered with or without the following options: lock-out bracket, mounting bracket, LED indicator, or as a lever-style handle. Features Include: * 500 continuous amp protection * IP65 water resistant * Corrosion resistant * M10 x 1 3/16 in. long studs (recommended torque is 11-13 ft.-lbs.) * Riveted design * Terminal isolator between terminals helps prevent accidental arcing * Lock-out version can be locked in the off position to comply with lock-out/tag-out regulations
( 7 )
$156.99
—
$188.99
Painless Performance headlight door wiring harnesses feature a bulletproof, OEM-style fuse block. They include factory connectors and wiring to function the original equipment headlight door activators. Order the model recommended for your vehicle.
( 2 )
$124.99
Electric-Life power window switch kits come in a variety of different styles. This allows you to chose a switch that best complements your vehicle's interior.
( 75 )
$137.70
—
$219.99
Painless Performance Second Generation Camaro PowerBraid kits help you finish the job right. They are complete kits that can be used with multiple 2nd Gen Camaro harnesses. Each kit contains all of the appropriate diameter wrap, ties, and tape. PowerBraid is a flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables. The woven construction provides good drainage while maintaining superior abrasion resistance. The split loom design has a minimum overlap of 25 percent to allow for easy installation and optimum wiring protection.
( 1 )
$174.99
These MSD alternate action switches are designed to be used as auxiliary ignition on/off buttons. They can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. MSD alternate action switches are assembled and constructed for harsh racing conditions.
Not Yet Reviewed
$158.95
Painless Wiring switch panels clean up your dashboard wiring by putting all of your switches in one convenient, organized place. The panels come with 4, 6, or 8-toggle or rocker switches, they're available in fused and un-fused models, and are easy to install.
( 33 )
$104.99
—
$259.99
These 40 amp, 12 V Longacre switch panels come pre-wired and all connections are soldered and heat-shrunk. These Longacre switch panels have silicone rubber switch covers on the accessory switches and plug into Longacre wiring harnesses. These switch panels are weatherproof, high-capacity ignition switch and aircraft-style covers.
( 17 )
$102.99
Flaming River Big Switch battery disconnects safely protect your vehicle from theft or electrical fire. These heavy-duty 250 amp switches have a high-impact design and are corrosion-resistant. They feature silver plated copper internal contact plates to provide a high amp rating, and the dual spring internals help to withstand extreme vibration. Flaming River Big Switch battery disconnects are offered with or without the following options: lock-out bracket, mounting bracket, LED indicator, or as a lever-style handle. Features Include: * 250 continuous amp protection * IP65 water resistant * Corrosion resistant * M10 studs (recommended torque is 11-13 ft.-lbs.) * Terminal isolator between terminals helps prevent accidental arcing * Lock-out version can be locked in the off position to comply with lock-out/tag-out regulations
( 50 )
$122.99
—
$191.99
American Autowire banked relay systems are available in 4-, 6-, and 8-position versions. Each panel comes fully assembled, and uses the same 6-gauge bus bars and non-conductive G10 composite base plate as AA's Highway Series wiring kits. All kits include 48 in. of tough GXL wire to ensure years of reliable service. Relays can be individually configured for ground or 12 V operation to support a wide variety of equipment and needs. With wiring, neatness counts. These banked relay systems are a great solution for a fresh installation, or to clean up and organize a car that has been modified over the years. Fuses, 30 amp relays, color-coordinated labels, and detailed installation instructions are included.
( 1 )
$236.55
ATP Automotive provides one of the widest product offerings of automatic gear-shifting control products, including transmission wiring harnesses, for most import and domestic vehicles. ATP designs and manufactures them to meet or exceed the OEM specifications to properly control your drivetrain. Get exact-fit, no-compromise replacement parts when you order the ATP automatic transmission wiring harnesses designed for your application.
( 1 )
$102.99
—
$155.99
ARC voltage reducers are designed for race applications where plenty of power is needed to turn over the vehicle, but a reduction is required for other components. These units feature 25 amp circuit breakers and excellent thermal materials to keep them within 40 degrees of outside temps. They drop battery voltage from 16 V to 12 V. ARC voltage reducers must be mounted out of the weather.
( 2 )
$222.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
