Availability
Showing In Stock Items. Show All 531 Items.
On Sale
MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent
( 13 )
$217.95
$196.15
Painless Performance ClassicBraid wire wrap is designed to protect and clean up your harness installation. It features a laterally split design that closes around the wire bundle without the need for additional taping or zip ties. The 25 percent edge overlap allows for easy installation over splices and inline connectors without exposing wires and cables. ClassicBraid wire wrap can withstand 300 degrees F continuous heat and does not melt until 475 degrees F. It's the best solution for looming wires under the hood on almost any vehicle. The wrap is available in different lengths and diameters, individually or in kits.
( 71 )
$144.99
—
$169.99
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 23 )
$169.99
Flaming River now offers an alternative to the FR1003 switch for racing with a 15% weight reduction, weighing in at only 19.2 ounces! Flaming River Big Switch 500 battery disconnects safely protect your vehicle from theft or electrical fire. These heavy-duty 500 amp switches have a high-impact design and are corrosion-resistant. They feature silver tin oxide pads and silver plated terminals to provide a high amp rating, and the dual spring internals help to withstand extreme vibration—making them ideal for racing and heavy-duty truck applications. Flaming River Big Switch 500 battery disconnects for racing are offered lock-out ready with a black anodized aluminum mounting bracket. Features Include: * 500 continuous amp protection * IP65 water resistant * Corrosion resistant * M10 x 1 3/16 in. long studs (recommended torque is 11-13 ft.-lbs.) * Riveted design * Terminal isolator between terminals helps prevent accidental arcing * Lock-out version can be locked in the off position to comply with lock-out/tag-out regulations
( 15 )
$133.99
Painless Performance 14-circuit pre-wired universal style fuse blocks are designed to replace your existing fuse block or as a starting point for custom wiring—and their versatility will allow them to be easily adapted to almost any vehicle. All that needs to be done is to terminate the circuit and then simply attach to the fuse block. These OEM-style pre-wired universal fuse block kits include a mounting bracket, fuses, flashers, horn relay, terminals and full instructions. Input and output wire not included. Fuse blocks are pre-wired and labeled for the following circuits: * Starting * Air conditioning/heat * Gauges/dash instruments * Brake lights * Headlights * Coil * Horn * Dome light * Radio * Electric fan * Turn signals * Emergency flashers * Wipers * Alternator
( 63 )
$164.99
DEI Easy Loom master kits are designed to give your vehicle's engine compartment a clean, professional look—while also protecting any exposed wires, cables, and hoses. These synthetic convoluted tubing "sleeves" come in a variety of lengths and diameters for your automotive and powersports applications. DEI Easy Loom master kits features and benefits include: * Protects against abrasion, chemicals, and the elements * Superior in style and function to plastic tubing * Self-closing split design with 30 percent overlap * Resists most automotive fluids and chemicals * Peak temp rating 347 degrees F (melting point 500 F) * Approved by most car manufacturers Kit includes: * Different diameter Easy Loom sleeves * Heat shrink tube ends * Locking ties * Electrical and silicone tape
( 13 )
$108.99
On Sale
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 12 )
$158.95
$143.05
The safe way to add electrical accessories to any vehicle is with Painless Performance CirKit Boss Auxiliary Fuse Block/7-Circuit/Weatherproof kits. They are the first circuit isolator system available with both constant and ignition hot circuits. Instead of tapping into an existing wire or spare circuit at the fuse, the CirKit Boss kits are add-on, relay-activated fuse blocks, activated by a small wire from any ignition source. They protect bulbs, accessories, and computers from the harmful spikes that may occur in a poorly connected power supply. The kits include the following weatherproof components: an in-line circuit breaker, relay, and relay/fuse block base with pre-terminated harness, heat-shrinkable terminals, fuse block cover, and the mounting hardware. Painless Performance CirKit Boss kits protect your OEM warranty and they are quite easy to install. Additional information for CirKit Boss kits: * All CirKit Boss units are made using TXL cross link polyurethane wire rated to 275 degrees at 600 V * Safely adds ignition hot and constant hot circuits * Circuits are individually fused * All wires are machine-terminated for reliability * Fuse style ATO/ATC
( 31 )
$129.99
Dangling wires are unsightly. Keep your wires under wraps with Summit Racing™ woven fabric wire wraps. Summit Racing™ wire wraps feature heat-retardant, woven polymer material construction split lengthwise for an easy installation. These flexible wraps spring closed around your wire bundles for a snug fit without the need for zip ties or tape. These wire wraps protect wires from abrasion and damage and are offered in different lengths and diameters.
( 97 )
$180.99
For electrical systems exposed to extreme conditions, including harsh vibration, dust, water, mud, and abusive terrain, Deutsch-style connectors are the first choice of vehicle and equipment manufacturers. Now you can make your very own weatherproof connectors with our Summit™ Deutsch connector kits. Each kit includes terminals (16-18 AWG male and female, 14-16 AWG male and female), plus housing sets (male and female ends) complete with seals and wedgelocks, all packed in a handy carrying case.
( 23 )
$110.99
—
$132.99
QuickCar ignition control panels feature bridged double-pole switches and large-gauge wires with heavy-duty connectors. These quality components provide better electrical conductivity and bulletproof reliability. Additional features and benefits include: * High-current, specially wound copper wiring provides superior performance * Specially formulated, high-temperature (105 degrees C) insulation is impervious to acids, oils, and fuels * Extra-thick connectors (.040) will not break * All connectors are professionally crimped and soldered for superior tensile strength (15,000 psi) * All connections are insulated with melt-lined shrink tubing instead of hard plastic insulators, which do not seal the connection and often crack when crimped * All connectors are plated with pure 24K gold for improved current transfer and resistance to oxidation
( 115 )
$127.11
—
$143.88
Have you ever experienced the aggravation and inconvenience of your engine not starting? Battery Brains use unique electronic technology to ensure that you will never be stranded again by a dead battery. Gold Battery Brains monitor the battery and isolate the electrical system if they detect an energy drain, to ensure a sufficient charge to start the engine. These small brain boxes feature a manual reset button to activate and easily mount on your vehicle's positive battery terminal. The Gold Battery Brains can include either a wired switch mounted remotely or a wireless remote control to activate the unit, reconnecting the circuit and starting the vehicle. The remotes can also be used to disconnect the battery when leaving the vehicle as an anti-theft feature. Your battery can now have brawn and brains, giving you peace of mind and preventing the loss of valuable time and money.
( 61 )
$124.99
—
$129.99
American Autowire 250-piece professional grade terminal and connector kits are designed for builders and hobbyists alike. They include the most common terminals and electrical connectors to help you with troubleshooting, repairing, or replacing connections. All contents are compartmentalized in a durable case with a heavy-duty latching closure. The inside of the lid has a diagram detailing the contents by image and description. These kits are great to keep in the car, the garage, or both! The 250-piece kits include: * (25) 56 Series terminals (male), single 14-16 gauge, general use * (10) 56 Series terminals (male), single 12 gauge, general use * (25) 56 Series terminals (female), single 14-16 gauge, general use * (10) 56 Series terminals (female), single 12 gauge, general use * (10) 56 Series terminals (female), double 14-16 gauge, general use * (10) 59 Series terminals (female), double 14-16 gauge, headlight * (10) 59 Series terminals (female), single 14-16 gauge, headlight * (10) Pack-Con terminals (male), single 18-20 gauge, turn signal * (10) Pack-Con terminals (female), single 14-16 gauge, turn signal * (10) S10 ring terminals, single 18-20 gauge, general use * (10) M5 ring terminals (large), single 14-16 gauge, general use * (10) M5 ring terminals (small), single 14-16 gauge, general use * (10) M6.3 ring terminals, single 14-16 gauge, general use * (20) rivet terminals, single 16-18 gauge, light socket * (15) rubber sleeves, 7/64 x 3/4 * (15) rubber sleeves, 5/32 x 7/8 * (1) 8-way connector (female), general use * (1) 8-way connector (male), general use * (1) 6-way connector (female), general use * (1) 6-way connector (male), general use * (1) 4-way connector (female), general use * (1) 4-way connector (male), general use * (2) triple connectors (female), general use * (2) triple connectors (male), general use * (3) double connectors (female), general use * (3) double connectors (male), general use * (5) single connectors (female), general use * (5) single connectors (male), general use * (4) 3-way connectors (female), headlight * (4) 2-way connectors (female), headlight * (2) 3 7/8 in. connectors (female), turn signal/steering column * (2) 3 7/8 in. connectors (male), turn signal/steering column * 1 pocket screwdriver/terminal pick * Heavy-duty case
( 14 )
$113.05
Biondo Terminator trans-brake buttons are the smoothest, most comfortable, and most adjustable buttons available. They have been designed around the new NHRA Super Stock and Competition eliminator rules for maximum allowed travel (3 in.) and adjustability. They feature an aluminum shaft for consistency, an internal spring, and shims that can be added or removed to close in on your best reaction time.
( 14 )
$179.99
On Sale
The long wire runs of an electric pump installation can sometimes result in a voltage drop at the pump. Holley fuel pump relay and harness kits offer good insurance that the fuel pump will be receiving full voltage from the battery. The kits can be used with any electric fuel pump, as long as the current load is not above 30 amps. They work with 12, 16 and 24 V systems and come equipped with 12 AWG that provides extra current-carrying capacity with minimal voltage loss. A 30 amp relay is included with a relay socket wired with extra-long leads specifically designed to reduce the number of splices required. Quality insulated crimp connectors are provided to make necessary splices where required and detailed installation instructions are also included.
( 8 )
$170.95
$153.85
Painless Performance 20-circuit pre-wired universal style fuse blocks can be used in any vehicle where upgrading or adding a fuse block is desired—and their compact size makes it super easy to mount them just about anywhere! Simply terminate the circuit and attach it to the 20-circuit fuse block. Painless Performance 20-circuit pre-wired universal fuse block kits include a mounting bracket, fuses, flashers, horn relay, crimp-on style terminals and comprehensive instructions (additional wire not included). Fuse blocks are pre-wired and labeled for the following circuits: * Starting * Air conditioning/heat * Gauges/dash instruments * Brake lights * Headlights * Coil * Horn * Dome light * Radio * Electric fan * Turn signals * Emergency flashers * Wipers * Alternator * Power windows * Power door locks * Electric fuel pump * Backup lights * Cigarette lighter and optional accessories
( 7 )
$236.99
Electric-Life power window switch kits come in a variety of different styles. This allows you to chose a switch that best complements your vehicle's interior.
( 75 )
$137.70
—
$219.99
Flaming River Big Switch battery disconnects safely protect your vehicle from theft or electrical fire. These heavy-duty 250 amp switches have a high-impact design and are corrosion-resistant. They feature silver plated copper internal contact plates to provide a high amp rating, and the dual spring internals help to withstand extreme vibration. Flaming River Big Switch battery disconnects are offered with or without the following options: lock-out bracket, mounting bracket, LED indicator, or as a lever-style handle. Features Include: * 250 continuous amp protection * IP65 water resistant * Corrosion resistant * M10 studs (recommended torque is 11-13 ft.-lbs.) * Terminal isolator between terminals helps prevent accidental arcing * Lock-out version can be locked in the off position to comply with lock-out/tag-out regulations
( 50 )
$122.99
—
$191.99
Painless Wiring switch panels clean up your dashboard wiring by putting all of your switches in one convenient, organized place. The panels come with 4, 6, or 8-toggle or rocker switches, they're available in fused and un-fused models, and are easy to install.
( 32 )
$104.99
—
$259.99
For repairs and weatherproof and vibration-resistant connections, the Pico GM Weatherpack kits will have you covered. These kits include four different type tools, grease tube, terminals, seals and housings—all safely enclosed in a metal case with divided compartments to keep everything organized.
( 2 )
$217.99
On Sale
MSD solid state relays clean up your wiring. These modules take the place of four standard relays and eliminate unsightly wiring. Four independent channels can be activated using either power or ground, and each channel is capable of handling up to 20 amps of continuous current—providing up to 80 amps of power. MSD solid state relays provide a compact and clean design to make your wiring project a breeze.
( 23 )
$199.95
$179.95
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 88 )
$179.95
$104.35
—
$194.65
Use Painless Performance remote master disconnect kits to easily disconnect your battery with a simple toggle switch. Each kit uses a small toggle switch to activate a 250 amp continuous duty solenoid instead of a big dirty battery mounted switch.
( 46 )
$125.99
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$105.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
