Availability
Showing In Stock Items. Show All 18 Items.
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$339.00
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,699.95
—
$3,299.95
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 93 )
$1,349.95
—
$2,949.95
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
The versatile DIYAutoTune MicroSquirt Standalone Engine Management System with 8 ft. harness is an entry-level, fully assembled ECU and universal 30 in. pigtail with varied applications—targeting powersports, single cylinder all the way up to 8 cylinders with up to two fuel and four spark outputs. Over 40 different ignition modes are supported—from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis … to unusual modes like Renix Jeep and the Suzuki Swift GTI. MicroSquirt ECU hardware features: * 2 high impedance injector outputs; max peak current 4.5 amps * 2 dedicated spark outputs * 2 general purpose on/off outputs; can be repurposed as spark outputs * 1 PWM IAC output; can be repurposed as general purpose output * 1 dedicated fuel pump output * 2 variable reluctor conditioned inputs * 1 optoisolated RPM input * 1 flex fuel or general purpose switched input * 7 analog inputs MicroSquirt ECU software features - Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables - 0.66 microsecond injector pulse width resolution - Allows blending multiple load types, including specialized mode for independent throttle bodies - Supports a wide variety of OEM cam and crank position sensors - Accelerator pump or model-based acceleration enrichment - Closed or open loop idle speed and boost control - On/off nitrous control - Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables - Staged injection - Table switching - 16 x 16 fuel tables - 12 x 12 spark tables - 2 step rev limiter (launch control) with no-lift shifting - Wideband AFR target table - Flex fuel sensor input - Real time barometric correction (external sensor required) - Sequential shift cut and air shifter control MicroSquirt with 8 ft. Harness Transmission Control Options: * MicroSquirt transmission control-free firmware allows you to use MicroSquirt with 30 in. harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of DIY's ECUs over canbus. * Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 and more. MicroSquirt with 8 ft. Harness CAN I/O Box Expansion: * Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug-n-play I/O extension box for MS3 or MS3Pro ECUs. It can offer a useful I/O addition: - 7 Analog inputs (0-5 V variable) - 2 Wheel speed inputs (VR or hall type) - 2 Wheel speed (hall type) or ground-switch inputs - 1 dedicated ground-switch input - 2 high current PWM/switch ground-switching outputs - 4 mid current PWM/switch ground-switching outputs - 1 low current PWM/switch 0-12 V output - Perfect for capturing and logging vehicle speed and additional sensor data
( 5 )
$388.00
HalTech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full VCU manual and software located on the USB key provided with the VCU, or downloadable from the HalTech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
HalTech's Nexus R3 ECU combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit). Product features: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: (1) Nexus R3 VCU
Not Yet Reviewed
$2,399.00
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,249.95
Superchips Flashcal and Amp'D throttle booster power switch kits pair a dynamic duo that will wake up your vehicle's laggy pedal feeling after that tire/lift upgrade. With these performance bundles, your truck or Jeep will have the most popular tire/gear calibration features along with six throttle sensitivity settings that can be switched on-the-fly. Features and benefits of the Flashcal and Amp'D throttle booster kits: * Corrects speedometer for tire upgrades between 26 in. and 42 in. (vary by application) * Speedometer recalibration for gear/axle swaps (vary by application) * Reads and clears diagnostics trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * TPMS options (vary by application) * Improves throttle sensitivity * Faster acceleration from a stop, and throughout the rpm band * Quicker spool-up * Push button control to activate six throttle sensitivity levels * The six modes: Stock, low—50 percent, medium—75 percent, high—100 percent, valet, and 400 percent "Wow Mode"
Not Yet Reviewed
$633.95
—
$699.95
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,434.76
—
$3,961.31
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
